• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.84-87
• /
• 2000

The system has a function of acquirement PCM signal of the preferred channel from the subhighway (SHW), connecting a universal signal transceiver unit and time switch unit, and then it classifies the type of signal such as R2MFC/ DTMF/ CCT/ VOICE, and finally discriminates the digit. This paper describes the spectral analysis of the PCM acquisition system usng the quick Fourier transform(QFT), and discusses the algorithm of signal analysis and discrimination.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.693-696
• /
• 2005

We propose a robust adaptive fuzzy controller for the transient stability and voltage regulation of a single-machine inflnite bus power system. The proposed control scheme is based on the input-output linearization to eliminate the system nonlinearities. To deal with uncertainties due to a parameter variation or a fault, we introduce fuzzy systems with universal function approximating capability which estimate the uncertainties on-line.

• Journal of Fisheries and Marine Sciences Education
• /
• v.4 no.1
• /
• pp.62-74
• /
• 1992

The effect of additional amounts of subsidiary materials on texture of fish meat paste were examined using Instron Universal Testing Machine to obtain fundamental data for steamed Alaska pollack meat paste showing good quality. The hardness revealed the good correlation with jelly strength among the six kinds of parameters of Instron texturometer. Products with higher hardness showed a better quality, but those with hardness higher than 16kg showed decreasing quality with increasing hardness. Predicting the quality of steamed Alaska pollack meat paste with various additional amounts of subsidiary materials as a function of hardness, H, the equation could be deduced as follows: H=11.56+0.54Xcs, H=12.22-0.23Xsp and H=11.65-7.13Xpp. The reasonable equations for predicting the quality of steamed Alaska pollack meat paste with various additional amounts of mixed subsidiary materials could be summarized as follows: H=11.57+0.53Xcs+0.44Xsp, H=11.97-1.83Xpp-0.17Xcs, and H=11.58+0.08Xpp-0.23Xsp.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.217-219
• /
• 2004

The installation of small sized dispersed generation(DG) units operating in parallel with the utility supply presents several technical problems for the protection and control of the system. One of the critical concerns is the occurrence of islanding. Hence, this paper propose the Digital Universal Relay(DUR) including anti-islanding function as DG interconnection interface. The existent islanding detection algorithms are examined. And the most effective and reliable method of those is modified for DUR application. The modified algorithm is evaluated through the modeling of the test system by PSCAD/EMTDC.

• Journal of Magnetics
• /
• v.18 no.1
• /
• pp.74-79
• /
• 2013

This paper proposes a sampling-based optimization method for electromagnetic design problems, where design sensitivities are obtained from the elaborate surrogate models based on the universal Kriging method and a local window concept. After inserting additional sequential samples to satisfy the certain convergence criterion, the elaborate surrogate model for each true performance function is generated within a relatively small area, called a hyper-cubic local window, with the center of a nominal design. From Jacobian matrices of the local models, the accurate design sensitivity values at the design point of interest are extracted, and so they make it possible to use deterministic search algorithms for fast search of an optimum in design space. The proposed method is applied to a mathematical problem and a loudspeaker design with constraint functions and is compared with the sensitivity-based optimization adopting the finite difference method.

• Nuclear Engineering and Technology
• /
• v.50 no.7
• /
• pp.1160-1167
• /
• 2018

Detectability of the loose parts (LPs) in steam generator (SG) was studied with eddy current testing technique such as X-probe, bobbin and rotating coils ($MRPC^{(R)}$) as a function of LP size and spacing between LP and tube or between LP and support structures. SG mockup simulating SG tube and support structures with LP was fabricated. The X-probe showed slightly better detectability than $MRPC^{(R)}$ for LP of ferrous (F-LP) material and vice versa for LP of nonferrous (NF-LP) material. In terms of feasibility, inspection rate and other predictable features of the SG tubing inspections, X-probe can be used reliably for monitoring the LPs and the flaws formed by LPs on SG tubes.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.30 no.4
• /
• pp.81-92
• /
• 2012

The purpose of this study is to compare values, characteristics and the world heritage listed tendency of walls in East Asia. Walls in East Asia are similar by the geographically adjacent, type, form and materials, etc. Thus to demonstrate the differentiation is not easy, but walls heritage of a tentative list or listed on the UNESCO World Heritage were discriminated by the evaluation criteria of world heritage. Hidden problems are not to be described the differences by the consistent manner. So we need efforts to separate the distinction and originality of walls according to the characteristics of each heritage. As the method of this study, we reviewed the terminology associated with the wall and then have examined the following four aspects as the characteristics of each heritage category. 1) Classification according to the function and purpose, 2) Classification according to the type and size of the walls(the length of wall), 3) Classification according to the location and topography, 4) Classification according to materials and technology(construction method). And we have analyzed the tendency of OUV(Outstanding Universal Value) of the world heritage listed wall. Also we examined the value basis of the differences and similarities presented by each heritage. In the future, we should complement the following two aspects of the wall heritage in East Asia for comparing the exact value. first, we ought to come up with a system that we can easily compare the similarities and differences of similar walls heritage. Second, we have to make every effort to describe the walls heritage by considering OUV evaluation criteria to be able to share with people all around the world.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.4
• /
• pp.209-216
• /
• 2021

Purpose: The purpose of this study is to compare the shear bond strength of resin cement for orthodontic brackets without applying an adhesive primer, to the case of applying an adhesive primer. Materials and Methods: The specimens were divided into three experimental groups, Transbond XT, GC Ortho Connect and Orthomite LC, and the enamel surface was divided into two sections, one with 37% phosphoric acid and the other with 37% phosphoric acid and an adhesive primer or universal adhesive. Each of three types of cement was applied to orthodontic bracket, and after bonding, the shear bond strength was measured. Results: Transbond XT and Orthomite LC significantly increased shear bond strength when orthodontic brackets were bonded after applying an adhesive primer and universal adhesive, respectively. Conclusion: It is expected that application of an adhesive primer or universal adhesive after acid etching will improve shear bond strength of orthodontic brackets in Transbond XT and Orthomite LC.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.4
• /
• pp.213-221
• /
• 2022

Purpose: The efficacy of the amount of sealer in the root canal and two retreatment NiTi file systems in removing filling materials. Materials and Methods: Extracted premolars with a single root canal were selected for this study. After access opening and root canal preparation up to size #40/.06, the specimens were randomly divided into four groups. Gutta percha (GP) tapers of .06 or .04 were used for each group and filled using a single-cone filling technique with CeraSeal, a calcium silicate-based sealer. Each group was retreated either using the ProTaper Universal Retreatment System (PTUR) or the Hyflex Remover (HR). The time taken to remove the filling material, the amounts of apically extruded debris, and canal cleanliness were measured and compared. Results: The amount of sealer did not affect the efficiency when removing the filling materials. However, the filling material was removed faster in the HR group than in the PTUR group. Two types of NiTi files showed similar retreatment effects in the amounts of apically extruded debris and in the degree of canal cleanliness. Conclusion: The amount of sealer in canal filling had no significant effect on retreatability. Retreatment with HR removed filling materials is faster than PTUR. There was no difference in other removal efficiencies according to the type of retreatment NiTi file.

• Journal of The Korean Astronomical Society
• /
• v.35 no.4
• /
• pp.197-208
• /
• 2002

Five contemporary pre-main sequence (PMS) evolution model grids are compared with the photo-metric data for a nearly complete sample of low-mass members in NGC 2264. From amongst the grids compared, the models of Baraffe et al. (1998) prove to be the most reliable in mass-age distribution. To overcome the limited mass range of the models of Baraffe et al. we derived a simple transformation relation between the mass of a PMS star from Swenson et al. (1994) and that from Baraffe et al., and applied it to the PMS stars in NGC 2264 and the Orion nebula cluster (ONC). The resulting initial mass function (IMF) of the ONC shows that the previous interpretation of the IMF is not a real feature, but an artifact caused by the evolution models adopted. The IMFs of both clusters are in a good agreement with the IMF of the field stars in the solar neighborhood. This result supports the idea proposed by Lada, Strom, & Myers (1993) that the field stars originate from the stars that are formed in clusters and spread out as a result of dynamical dissociation. Nevertheless, the IMFs of OB associations and young open clusters show diverse behavior. For the low-mass regime, the current observations suffer from difficulties in membership assignment and sample incompleteness. From this, we conclude that a more thorough study of young open clusters is necessary in order to make any definite conclusions on the existence of a universal IMF.