• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.13-19
• /
• 2019

After the Fukushima nuclear accident, a new power supply using a lithium polymer battery has been proposed the first time in the world as the safety of the emergency battery facility has been required. It is required to have the safety of the rack system in which the battery device is installed in order to apply the proposed technology to the field. Therefore, the purpose of this study is to evaluate the seismic performance of string and rack frame for lithium-polymer battery devices developed for the first time in the world to satisfy 72 hours capacity. (1) The natural frequency of the unit rack system was 9 Hz, and the natural frequency before and after the earthquake load did not change. This means that the connection between members is secured against the design earthquake load. (2) he vibration reduction effect by string design was about 20%. (3) As a result of the seismic performance test under OBE and SSE conditions, the rack frame system was confirmed to be safe. Therefore, the proposed rack system can be applied to the nuclear power plant because the rack system has been verified structural safety to the required seismic forces.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.245-247
• /
• 2022

Backscattered x-ray imaging is a technology capable of acquiring an image inside an irradiated object by measuring X-rays scattered from an object. For image acquisition, the system must include an X-ray generator and a detection system for measuring scattered x-rays. The imaging device must acquire a real-time signal at sampling intervals for x-rays generated by passing through a high-speed rotating collimator, and for this purpose, a high-speed signal acquisition device is required. We developed a high-speed multi-channel signal acquisition device for converting and transmitting signals generated by the sensor unit composed of a large-area plastic scintillator and a photomultiplier tube. The developed detector is a system capable of acquiring signals at intervals of at least 15u seconds and converting and transmitting signals of up to 6 channels. And a system includes remote control functions such as high voltage, signal gain, and low level discrimination for individual calibration of each sensor. Currently, we are conducting an application test for image acquisition under various conditions.

• Journal of Korean Academy of Nursing Administration
• /
• v.2 no.2
• /
• pp.97-107
• /
• 1996

Nursing standards determine the type and extent of services that are delivered to the patients and define quality care and communicate the institution's expectations of care. Thus, taking the standard of care and incorporating it into a welldefined indicator of excellent patient care becomes one of the first activities in setting up the nursing service's quality assurance process. The purpose of this study was to determine the impact of using a nursing care standards for the quality of nursing care in gastrectomy patients. The subjects were composed of fourty-two under going gastrectomy patients with stomach cancer in general surgery nursing care unit of K University Hospital in Pusan. The data was collected from January 3 to April 13,1996. The subjects were divided into a control group - those admitted from Jan.3 to Feb.12 and an experimental group those admitted from Feb.18 to April 13. The instruments used for this study were a nursing care standards in gastrectomy patients developed by the investigator and an evaluation tool for the quality of nursing care in abdominal surgery patients developed by Byoung-Sook Lee in 1995. The data was analized by means of chi-square test, t-test and Cronbach-alpha test with the SAS System. The result was as follows : The hypothesis, that scores of the quality of nursing care in the experimental group would be higher than that of the control group. was supported(t=-6.12, p=0.00). The detailed results of each standards of evaluation tool were as follows : The mean score of the experimental group was significantly higher than that of the control group in audit standard 1:'Collection of basic data of the patients', (t=-3.76, p=0.00). The mean score of the experimental group was significantly higher than that of the control group in audit standard 2 : 'Defining nursing diagnoses(or nursing problems)', (t= (-), p= (-) ). The mean score of the experimental group was significantly higher than that of the control group in audit standard 3:'Estabilishment of nursing care plan according to nursing diagnoses(or nursing problems)',(t= (-), p= (-) ). The mean score of the experimental group was significantly higher than that of the control group in audit stndard 4:'Implimentation of nursing care plan', (t=-2.38, p=0.01). The mean score of the experimental group was significantly higher than that of the control group in audit standard 8 : 'Increase of the knowledge of health related to surgery',(t=-2.40, p=0.01). No significant differences between the mean scores of the experimental group and that of the control group in audit standard 5 : 'Recover and maintain of the physical function', audit standard 6:'Prevention of the post-operative complication', audit standard 7 : 'Decrease of discomfort caused by operation', and audit standard 9 : 'Patient satisfaction in nursing care' were found. The standards of evaluation tool were devided into two dimension. One was process dimension which contains four standards(audit standard 1 to 4), the other was outcome dimension which contains five standards(audit standard 5 to 9). The mean score of the experimental group was significantly higher than that of the control group in process dimension (t=-12.30, p=0.00), but no significant difference between the mean scores of the experimental group and that of the control group in outcome dimension was found. From these results, it is concluded that using a nursing care standards in gastrectomy patients promotes quality of nursing care and nursing care standards of various fields are necessary for effective nursing care.

• Journal of Periodontal and Implant Science
• /
• v.29 no.3
• /
• pp.561-578
• /
• 1999

The goal of periodontal therapy is the periodontal regeneration by the removal of microorganisms and their toxic products from the periodontally diseased root surface. To achieve periodontal regeneration, root conditioning as an adjunct to root planing has been done. There are low pH etchants such as citric acid, tetracycline-HCl, and EDTA solution which is a neutral chelating agent. The purpose of present study was to examine the effect of root conditioning by citric acid, tetracycline HCl, and EDTA. Total 35 root specimens(6${\times}$3${\times}$2mm) were prepared from the periodontally diseased teeth, scaled and root planed. The specimens were treated with normal saline for 1 minute, saturated citric acid(pH 1) for 3 minutes, 50mg/ml tetracycline-HCl(pH 2) for 5 minutes, 15% EDTA(pH 7) for 5 minutes using rubbing technique. The specimens were examined under scanning electron microscopy at 1000, and 3000 magnification. On the microphotographs taken at 1000 magnification, the numbers of opened and patent dentinal tubules per unit area(10,640${\mu}m^2$) were counted. And the diameters of opened dentinal tubules per unit are (10,640${\mu}m^2$) were measured. The differences of number and diameter among all groups were statistically analyzed by Kruskal Wallis Test. The results were as follows; 1. In the specimens applied with normal saline(control group), the root surface was finely cracked, and was covered by irregular smear layer. Neither exposed dentinal tubules nor any patent dentinal tubules could be seen. 2. In the specimens applied with saturated citric acid(experimental 1 group), the globular collagen fibers were exposed around the peritubular space, and many dentinal tubules were revealed. 3. In the specimens applied with tetracycline-HCl(experimental 2 group), the process-like collagen fibers were exposed around the peritubular space, and some dentinal tubules were revealed. 4. In the specimens applied with 15% EDTA(experimental 3 group), the root surface was covered by the collagenous fibrillar network, and many dentinal tubules were revealed. 5. The numbers of opened and patent dentinal tubules were significantly more in exp. 1 group and exp. 3 group than in exp. 2 group(P<0.05). But there was no significant difference between exp. 1 group and exp. 3 group. In control group, the number of opened and patent dentinal tubules could not be counted because any dentinal tubules couldn't be seen. 6 . The diameter of opened dentinal tubules was significantly smaller in exp. 1 group and exp. 3 group than in exp. 2 group(P<0.05). But there was no significant difference between exp. 1 group and exp. 3 group. In control group, the diameter of opened dentinal tubules could not be measured because any dentinal tubules couldn't be seen. The results demonstrate that root conditioning with citric acid, tetracycline- HCl, and EDTA is more effective in periodontal healing than only root planing, and 15% EDTA solution can replace low pH etching agents such as citric acid, tetracycline-HCl for root conditioning.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.22 no.1
• /
• pp.53-66
• /
• 1980

The research work is concerned with the analytical and experimental studies on the heat transfer phenomenon around the underground concrete digester used for biogas production Systems. A mathematical and computational method was developed to estimate heat losses from underground cylindrical concrete digester used for biogas production systems. To test its feasibility and to evaluate thermal parameters of materials related, the method was applied to six physical model digesters. The cylindrical concrete digester was taken as a physical model, to which the model,atical model of heat balance can be applied. The mathematical model was transformed by means of finite element method and used to analyze temperature distribution with respect to several boundary conditions and design parameters. The design parameters of experimental digesters were selected as; three different sizes 40cm by 80cm, 80cm by 160cm and l00cm by 200cm in diameter and height; two different levels of insulation materials-plain concrete and vermiculite mixing in concrete; and two different types of installation-underground and half-exposed. In order to carry out a particular aim of this study, the liquid within the digester was substituted by water, and its temperature was controlled in five levels-35。 C, 30。 C, 25。 C, 20。C and 15。C; and the ambient air temperature and ground temperature were checked out of the system under natural winter climate conditions. The following results were drawn from the study. 1.The analytical method, by which the estimated values of temperature distribution around a cylindrical digester were obtained, was able to be generally accepted from the comparison of the estimated values with the measured. However, the difference between the estimated and measured temperature had a trend to be considerably increased when the ambient temperature was relatively low. This was mainly related variations of input parameters including the thermal conductivity of soil, applied to the numerical analysis. Consequently, the improvement of these input data for the simulated operation of the numerical analysis is expected as an approach to obtain better refined estimation. 2.The difference between estimated and measured heat losses was shown to have the similar trend to that of temperature distribution discussed above. 3.It was found that a map of isothermal lines drawn from the estimated temperature distribution was very useful for a general observation of the direction and rate of heat transfer within the boundary. From this analysis, it was interpreted that most of heat losses is passed through the triangular section bounded within 45 degrees toward the wall at the bottom edge of the digesten Therefore, any effective insulation should be considered within this region. 4.It was verified by experiment that heat loss per unit volume of liquid was reduced as the size of the digester became larger For instance, at the liquid temperature of 35˚ C, the heat loss per unit volume from the 0. 1m$^3$ digester was 1, 050 Kcal/hr m$^3$, while at for 1. 57m$^3$ digester was 150 Kcal/hr m$^3$. 5.In the light of insulation, the vermiculite concrete was consistently shown to be superior to the plain concrete. At the liquid temperature ranging from 15。 C to 350 C, the reduction of heat loss was ranged from 5% to 25% for the half-exposed digester, while from 10% to 28% for the fully underground digester. 6.In the comparison of heat loss between the half-exposed and underground digesters, the heat loss from the former was fr6m 1,6 to 2, 6 times as much as that from the latter. This leads to the evidence that the underground digester takes advantage of heat conservation during winter.

• Ecology and Resilient Infrastructure
• /
• v.3 no.4
• /
• pp.221-230
• /
• 2016

Multi-functional floating wetland island (mFWI) was developed in order to prevent algal bloom and to improve water quality through several unit purification processes. A test bed was applied in the stagnant watershed in an urban area, from the summer to the winter season. For the advanced treatment, an artificial phosphorus adsorption/filtration medium was applied with micro-bubble generation, as well as water plants for nutrient removal. It appeared that the efficiency of chemical oxygen demand (COD) and total phosphorus (T-P) removal was higher in the warmer season (40.9%, 45.7%) than in the winter (15.9%, 20.0%), and the removal performance (suspended solid, chlorophyll a) in each process differs according to seasonal variation; micro-bubble performed better (33.1%, 39.2%) in the summer, and the P adsorption/filtration and water plants performed better (76.5%, 59.5%) in the winter season. From the results, it was understood that the mFWI performance was dependent upon the pollutant loads in different seasons and unit processes, and thus it requires continuous monitoring under various conditions to evaluate the functions. In addition, micro-bubbles helped prevent the formation of anaerobic zones in the lower part of the floating wetland. This resulted in the water circulation to form a new healthy aquatic ecosystem in the surrounding environment, which confirmed the positive influence of mFWI.

• Journal of The Korean Association For Science Education
• /
• v.23 no.1
• /
• pp.35-46
• /
• 2003

Problem solving ability, having been thought as one of the most important goals of science education is also a primary task for the current education. Indeed, the students' problem solving ability has shown almost no actual progress, despite our long accumulated science education. Under this circumstances, cooperative learning, a way to grow students' positive inter-dependence and problem solving ability in the basis of their active participation and discussion, was proposed as an effective teaching method. But, results have not consistently shown the advantage of cooperative learning over traditional learning for promoting academic achievement in science. Studies have consistently shown greater effectiveness on affective aspects. But, relatively few have focused on biology in Korea. The purpose of this study was to examine the effects of cooperative learning on the achievement and attitude of high school biology students. The pretest-posttest control group design was applied. The sample consisted of 50 11th-grade female students in experimental group(cooperative learning Student Team Achievement Division model) and 50 students in control group(traditional learning). Students in both groups recieved identical content instruction on the unit 'II. Methabolism'. These groups were treated for 13 hours during 5 weeks. Achievement data were collected using a 24-item multiple-choice test(content validity= .85). Science attitude was measured by an instrument which adapted by Kim In Hee(1994). The instrument(Cronbach $\alpha$=.89) included 40 items in four subscales: attitude toward science, social meaning of science, attitude toward science class, and scientific attitude. An analysis of covariance (ANCOVA) was used as the data analysis procedure. For the achievement data, no significant difference exists between the cooperative and traditional groups (p> .05). But, cooperative learning was effective in low-ability students(p < .05). For the science learning attitude data, cooperative learning was more effective than the traditional one(p< .05). Students in the cooperative group acheived better than those in traditional one especially in the subscale of attitude toward science class. There was no meaningful difference of the two methods in both high and average ability students, while cooperative learning was more effective than the traditional one in low ability students(p<.05).

• Management & Information Systems Review
• /
• v.33 no.1
• /
• pp.139-155
• /
• 2014

This study is to examine the linkage of volatility between changes in the stock market of India and other countries through the integration of the world economy. The results were as follows: First, autocorrelation or serial correlation did not exist in the classic RS model, but long-term memory was present in the modified RS model. Second, unit root did not exist in the unit root test for all periods, and the series were a stable explanatory power and a long-term memory with the normal conditions in the ARFIMA model. Third, in the multivariate asymmetric BEKK and VAR model before the financial crisis, it showed that there was a strong influence of the own market of Taiwan and UK in the conditional mean equation, and a strong spillover effect from Japan to India, from Taiwan to China(Korea, US), from US(Japan) to UK in one direction. In the conditional variance equation, GARCH showed a strong spillover effect that indicated the same direction as the result of ARCH coefficient of the market itself. Asymmetric effects in three home markets and between markets existed. Fourth, after the financial crisis, in the conditional mean equation, only the domestic market in Taiwan showed strong influences, and strong spillover effects existed from India to US, from Taiwan to Japan, from Korea to Germany in one direction. In the conditional variance equation, strong spillover effects were the same as the result of the pre-crisis and asymmetric effect in the domestic market in UK was present, and one-way asymmetric effect existed in Germany from Taiwan. Therefore, the results of this study presented the linkage between the volatilities of the stock market of India and other countries through the integration of the world economy, observing and confirming the asymmetric reactions and return(volatility) spillover effects between the stock market of India and other countries.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.4
• /
• pp.316-323
• /
• 2011

Purpose: The purpose of this study was to investigate the effect of different thread designs on the marginal bone stresses around dental implant. Materials and methods: Standard ITI implant(ITI Dental Implant System; Straumann AG, Waldenburg, Switzerland), 4.1 mm in diameter and 10 mm in length, was selected as control. Test implants of four different thread patterns were created based on control implant, i.e. maintaining all geometrical design of control implant except thread pattern. Four thread designs used in test implants include (1) small V-shape screw (model A), (2) large V-shape screw (model B), (3) buttress screw (model C), and (4) trapezoid screw (model D). Surface area for unit length of implant was 14.4 $mm^2$ (control), 21.7 (small V-shape screw), 20.6 (large V-shape screw), 17.0 (buttress screw) and 28.7 $mm^2$ (trapezoid screw). Finite element models of implant/bone complex were created using an axisymmetric scheme with the use of NISA II/DISPLAY III (Engineering Mechanics Research Corporation, Troy, MI, USA). A load of 100 N applied to the central node on the crown top either in parallel direction or at 30 degree to the implant axis (in order to apply non-axial load to the implant NKTP type 34 element was employed). Quantification and comparison of the peak stress in the marginal bone of each implant model was made using a series of regression analyses based on the stress data calculated at the 5 reference points which were set at 0.2, 0.4, 0.6, 0.8 and 1.0 mm from implant wall on the marginal bone surface. Results: Results showed that although severe stress concentration on the marginal bone cannot be avoided a substantial reduction in the peak stress is achievable using different thread design. The peak marginal bone stresses under vertical loading condition were 7.84, 6.45, 5.96, 6.85, 5.39 MPa for control and model A, B, C and D, respectively. And 29.18, 26.45, 25.12, 27.37, 23.58 MPa when subject to inclined loading. Conclusion: It was concluded that the thread design is an important influential factor to the marginal bone stresses.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.3
• /
• pp.207-216
• /
• 2020

Purpose: To compare the polishing characteristics and their influence on Candida albicans adhesion to the recently introduced polyetherketoneketone (PEKK) and the conventional polymethylmethacrylate (PMMA) denture resin material. Materials and methods: Specimens from PEKK (Group E) and PMMA (Group M) were made in dimensions of 8 mm in diameter and 2 mm in thickness. The specimens were further divided into sub-groups according to the extent of polishing (ER, MR: rough; EP, MP: polished, N = 12 each). The specimens were polished using polishing machine and SiC foil. ER and MR group specimens were polished with 600 grit SiC foil only. EP and MP groups were further polished with 800, 1,000, 1,200 grit SiC foils sequentially. To measure the surface roughness values (Sa) of specimens, atomic force microscope (AFM) was used and scanning electron microscope (SEM) observation under 1,000, and 20,000 magnifications was performed to investigate surface topography. The polished specimens were soaked in C. albicans suspension for 2 hours with shaking to promote adhesion. The attached C. albicans were detached from the surface with 10 times of pipetting. The suspension of detached C. albicans was performed by serial dilution to 10³ times, and the diluted suspensions were inoculated on Sabouraud dextrose agar plates using spread plate method. After incubating the plate for 48 hours, colony forming unit (CFU)/plate of C. albicans was counted. Statistical analysis was performed using one-way ANOVA and Tukey HSD test to confirm significant difference between the groups (α=.05). Results: Average Sa value was significantly higher in MR group compared to other groups (P<.05), meaning that additional polishing steps reduced surface roughness effectively only in the PMMA specimens. There was no significant difference in Sa values between MP and EP groups. In SEM images, PEKK specimens showed numerous spikes of abraded material protruding from the surface and this phenomenon was more significant in EP group. The mean CFU/plate value was the highest in EP group and this was significant when it was compared to MP group (P<.05) which was the lowest. Conclusion: Polishing PEKK using serial SiC abrasive foil may result in higher adhesion of C. albicans. In clinic, this should be considered carefully.