• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.1807-1813
• /
• 2018

In this paper, the fault line selection and location problems of single line-to-ground (SLG) fault in distribution network are addressed. Firstly, the adaptive filtering property for empirical mode decomposition is formulated. Then in view of the different characteristics showed by the intrinsic mode functions(IMF) under different fault inception angles obtained by empirical mode decomposition, the sign of peak value about the low-frequency IMF and the capacitance transient energy is chosen as the fault line selection criteria according to the different proportion occupied by the low-frequency components. Finally, the fault location is determined based upon the comparison result with adjacent fault passage indicators' (FPI) waveform on the strength of the interaction between the distribution terminal unit(DTU) and the FPI. Moreover, the logic nodes regarding to fault line selection and location are newly expanded according to IEC61850, which also provides reference to acquaint the DTU or FPI's function and monitoring. The simulation results validate the effectiveness of the proposed fault line selection and location methods.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.11
• /
• pp.41-47
• /
• 2016

High efficiency video coding (HEVC) employs a coding tree unit (CTU) to improve the coding efficiency. A CTU consists of coding units (CU), prediction units (PU), and transform units (TU). All possible block partitions should be performed on each depth level to obtain the best combination of CUs, PUs, and TUs. To reduce the complexity of block partitioning process, this paper proposes the PU mode skip algorithm with region of interest (RoI) selection using motion vector. In addition, this paper presents the CU depth level skip algorithm using the co-located block information in the previously encoded frames. First, the RoI selection algorithm distinguishes between dynamic CTUs and static CTUs and then, asymmetric motion partitioning (AMP) blocks are skipped in the static CTUs. Second, the depth level skip algorithm predicts the most probable target depth level from average depth in one CTU. The experimental results show that the proposed fast CU decision algorithm can reduce the total encoding time up to 44.8% compared to the HEVC test model (HM) 14.0 reference software encoder. Moreover, the proposed algorithm shows only 2.5% Bjontegaard delta bit rate (BDBR) loss.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.11
• /
• pp.113-123
• /
• 2018

First of all, the multi-story Housing applying resident's participation in europe was classified by the menu selection method, the two-step supply method and the cooperative method. And then I analyzed flexible unit plan of cases for deriving the planning methode and the characteristics of flexibility. First, I analyzed the area and form of the unit plan, structure and Installation, fixed and variable elements to derive the planning method. The area of units are distributed from a minimum of $35m^2$ to a maximum of $150m^2$, and many of the unit planes have a narrow front and a deep depth. The structure is a long-span wall-structure or a skeleton structure, and is designed without any columns and bearing walls in the interior space for flexibility in spatial composition. The vertical shafts are located in the center of the unit in a box-form or in the corner at the unit dividing wall for free placement of interior wall. Fixed elements are framework and facility systems. Most of the future residents in the two-steps supply method and the cooperative method were able to freely design the internal space within the zoning concept proposed by the architect and change the location of the facade element within module system proposed by the architect. Second, the characteristics of the flexibility applied to the unit plan were divided in integrated flexibility, functional flexibility, construction flexibility, and supply flexibility. The integrated flexibility enables residents to give the variable space combination based on the complex structure of the inner space for providing various living experiences. Regarding functional flexibility, the three-dimensional spatial structure with neutral space has multi-functionality according to the needs of residents and easily accepts mixing of hybrid programs such as work and residence. Constructive flexibility allows residents to create identity by freely planning interior space and changing the size or location of facade components in a determined system of architects. Finally, various types of size and space composition are proposed and realized in the whole building applying menu selection method, so that flexibility in the offer can accommodate and integrate various types of living.

• Journal of Korean Society for Quality Management
• /
• v.32 no.2
• /
• pp.77-92
• /
• 2004

It is difficult but very necessary to measure the productivity of container terminals as logistics service provider. It is meaningful to find the appropriate inputs and outputs of the logistics service delivery systems and to measure the relationship between these inputs and outputs. This study proposes a model of evaluating the efficiency of container terminals. The evaluation consists of three phases. First, DEA(Data Envelopment Analysis) phase, determines the efficiency score and weights of DMUs(Decision Making Unit). This phase performs through four steps : selection of DMU, selection of DEA model, determination of input and output factors, calculation of efficiency score and weights for each DMU. Secondly, CEM (Cross Evaluation Model) phase, is to calculate the cross-efficiency scores of DMUs. This phase performs through three steps: selection of CEM, determination of cross-efficiency score for each DMU and development of cross-efficiency matrix. Finally, average cross-efficiency analysis phase is to compute the average cross-efficiency score. The proposed model discriminates among DMUs and ranks DMUs, whether they are efficient or inefficient.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.54-55
• /
• 2017

Recently, plastic panels have replaced plywood panels in formwork. Since, plastic panels have excellent workability, can be re-used for over 50 times, and are lighter than Plywood. This paper aims to perform an economic analysis of plastic panels by considering unit cost, cost of form oil and the number of use. The results showed that plastic panels are more economical than plywood according to an increase in area of construction site. This result of the study can be used as a basic data for the selection of plastic formwork panels.

• Journal of Korean Society on Water Environment
• /
• v.29 no.3
• /
• pp.343-353
• /
• 2013

Flow duration curve (FDC) can be developed by linking the daily flow data of stream flow monitoring network to 8-day interval flow data of the unit watersheds for the management of Total Maximum Daily Loads. This study investigated the applicable method for the development of long term FDC with the selection of the stream flow reference sites, and suggested the development of the FDC in 4 river basins. Out of 142 unit watersheds in 4 river basins, 107 unit watersheds were shown to estimate daily flow data for the unit watersheds from 2006 to 2010. Short term FDC could be developed in 64 unit watersheds (45%) and long term FDC in 43 unit watersheds (30%), while other 35 unit watersheds (25%) were revealed to have difficulties in the development of FDC itself. Limits in the development of the long term FDC includes no stream monitoring sites in certain unit watersheds, short duration of stream flow data set and missing data by abnormal water level measurements on the stream flow monitoring sites. To improve these limits, it is necessary to install new monitoring sites in the required areas, to keep up continuous monitoring and make normal water level observations on the stream flow monitoring sites, and to build up a special management system to enhance data reliability. The development of long term FDC for the unit watersheds can be established appropriately with the normal and durable measurement on the selected reference sites in the stream flow monitoring network.

• Plant Biotechnology Reports
• /
• v.5 no.1
• /
• pp.89-103
• /
• 2011

Two rice varieties, viz. Nonabokra and Pokkali, have been evaluated for their responses to salinity in terms of some physiological and biochemical attributes. During the exposure to salinity (200 mM concentration of sodium chloride for 24, 48, and 72 h), a significant increase in sodium was recorded which was also concomitant with the changes of other metabolic profiles like proline, phenol, polyamine, etc. The protein oxidation was significantly increased and also varied between the two cultivars. The changes in activities of anti-oxidative enzymes under stress were significantly different to the control. The detrimental effects of salinity were also evident in terms of lipid peroxidation, chlorophyll content, protein profiles, and generation of free radicals; and these were more pronounced in Pokkali than in Nonabokra. The assessment and analysis of these physiological characters under salinity could unravel the mechanism of salt responses revealed in this present study and thus might be useful for selection of tolerant plant types under the above conditions of salinity.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.2
• /
• pp.250-261
• /
• 1999

Based on a set of performance plots relating the design variables to the imposed conditions, an easy-to-use and versatile design procedure for chevron-type multipass plate heat exchangers is developed. In order for the present procedure to cover multipass with unequal passes and non-unity ratio of heat capacity rate, each stream number of transfer unit is adopted as the basic design variable instead of the exchanger number of transfer unit. It is found that there exists a unique relation between the stream and exchanger number of transfer units regardless of the chevron angle and the plate length. In addition, for a given value of the pressure drop the heat transfer area per unit mass flow rate can be expressed in terms of the stream number of transfer unit only. These two relationships in the form of simple plots constitute the framework of design. The sample results in comparison with the available data indicate that the present procedure includes the previous ones as a subset, and that every design method is affected essentially by the selection of specific correlations for the heat transfer coefficient and the friction factor.

• Journal of the Korean housing association
• /
• v.16 no.1
• /
• pp.97-104
• /
• 2005

The purpose of this study is to understand changes of the population and family composition in apartment houses. The main contents of this study is to find the way of housing planning through the analysis of the population and family composition by the unit types. The population and family composition were studied by computer data base program to 11,000 residents of selection 4 apartments houses. The structure of the family types proved to be constant by the result of analyzing the 10 family types. If the family types of certain resident's groups are given, this study will be able to estimate population structure to them. The transition of the population and the family composition changes to the unit types proved to be constant by the time. The distribution of manhood and matured children is tend to change according to how large the size of house is, and to change the structure of family composition.

• MALSORI
• /
• no.65
• /
• pp.105-124
• /
• 2008

This paper presents the effects of different phone-like-unit (PLU) sets in order to propose an optimal PLU set for the performance improvement of Korean automatic speech recognition (ASR) systems. The examination of 9 currently used PLU sets indicates that most of them include a selection of allophones without any sufficient phonetic base. In this paper, a total of 34 PLU sets are designed based on Korean phonetic characteristics arid the effects of each PLU set are evaluated through experiments. The results show that the accuracy rate of each phone is influenced by different phonetic constraint(s) which determine(s) the PLU sets, and that an optimal PLU set can be anticipated through the phonetic analysis of the given speech data.