• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.5
• /
• pp.589-598
• /
• 1995

Filtering rates of Crassostrea gigas were experimentally investigated with reference to effects of water temperature and size. Absorptiometric determinations of filtering rates with oysters being fed diatom Chaetoceros calcirtans were carried out in a closed system. Optical density of 675nm in path length 100mm cell used as the indication of food particles absorption was appeared directly In proportion with the concentration of diatom pigment $chlorophyll-\alpha$. In the closed system where $C_0$ is $OD_{675}$ at initial time 0, $C_t$, at time t, and Z is the decreasing coefficient of OD as meaning of instantaneous removal speed, then $C_t=C_0{\cdot} e^{-2t}$, $Z=In(C_t/C_0)/t$. On the assumption that the filtering rate is constant, then removal rate per unit time (d) is $d=-e^{-z}$. If t is used to time unit of hour (hr), the filtering rate (FR) in I/hr is given by $FR=V{\cdot}d=V(1-e^{-z})$, where V is the water volume (I) of the experimental vessel. Filtering rate increased as exponential function with increasing temperature while not over critical limit. The critical temperature for filtering rate was assumed to be between $28^{\circ}C$ and $29^{\circ}C$. And the weight exponent for filtering rate is 0.223. The model formula derived from the results as FR, $Ihr^{-1}$ = $Exp(0.208{\cdot}T-4.324){\cdot} (DW)^{0.223}$ (T<29 $^{\circ}C)$ where T is water temperature $(^{\circ}C

• Journal of the Korea Concrete Institute
• /
• v.27 no.4
• /
• pp.419-426
• /
• 2015

The purpose of this study is to investigate experimentally the optimum mix design and site application case of soil mixing wall (SMW) method which is cost-effective technique for construction of walls for cutoff wall and excavation support as well as for ground improvement before constructing LNG storage tank typed under-ground. Considering native soil condition in site, main materials are selected ordinary portland cement, bentonite as a binder slurry and also it is applied $1,833kg/m^3$ as an unit volume weight of native soil, Variations for soil mixing wall are as followings ; (1) water-cement ratio 4cases (2) mixing velocity (rpm) 3levels (3) bleeding capacity and ratio, compressive strength in laboratory and site application test. As test results, bleeding capacity and ratio are decreased in case of decreasing water-cement ratio and increasing mixing velocity. Required compressive strength (1.5 MPa) considering safety factors in site is satisfied with the range of water-cement ratio 150% below, and test results of core strength are higher than those of specimen strength in the range of 8~23% by actual application of element members including outside and inside in site construction work. Therefore, optimum mix design of soil mixing wall is proposed in the range of unit cement $280kg/m^3$, unit bentonite $10kg/m^3$, water-cement ratio 150% and mixing velocity 90rpm and test results of site application case are satisfied with the required properties.

• International Journal of Highway Engineering
• /
• v.8 no.1 s.27
• /
• pp.89-98
• /
• 2006

The weight-to-power ratio of the standard truck for the climbing lane design is known to be 200lb/hp. The value was known to be assumed based on constant trucks' capability and regional distributions in stead of widely varied distributions region by region. Additionally, this value was assumed after investigating registered vehicles' statistics instead of investigating real portions of truck volumes. Therefore, it may be said that the value of the current standard truck does not reflect regional or industrial diversity and proportions of truck volumes. To resolve these issues, the present paper studies diversified standard trucks which consider regionally or industrially diversified and observed-volume based weigh-to-power ratios. For this purpose, individual trucks' weigh-to-power ratios obtained at toll-gates of national expressways were used. For regionally based study, the whole nation are divided into 8 regions, then each region is characterized by a unit of a weigh-to-power ratio. The applicability of each value is provided. Results show that the single value for the nationwide standard truck may be 208 lb/hp, 8 lb/hp higher than the current value of 200 lb/hp. Results also show that regional values ranged widely from 170 lb/hp to 230 lb, 30 lb/hp higher/lower than the current value. Conclusively, regional diversity of trucks' weigh-to-power ratios was identified then three types of standardized weigh-to-power ratios which may represent regional characteristics were suggested. As the diversified standard truck are applied to the design standard, two benefits are expected such as decrease of rear-end accident rates or decrease of climb lane construction costs.

• Journal of Environmental Health Sciences
• /
• v.47 no.4
• /
• pp.366-377
• /
• 2021

Background: Polycyclic aromatic hydrocarbons (PAHs) are generated in petrochemical complexes, can spread to residential areas and affect the health of residents. Although harmful PAHs are mainly present in particle phase, gas phase PAHs can generate stronger toxic substances through photochemical reaction. Therefore, the risk assessment for PAHs around the petrochemical complex should consider both particle and gas phase concentrations. Objectives: This study aimed to investigate the concentration characteristics of particle and gas phase PAHs by season in residential areas around petrochemical complexes, and to assess the risk of PAHs. Methods: Samples were collected for 7 days by seasons in 2014~2015 using a high volume air sampler. Particle and gas phase PAHs were sampled using quartz filter and polyurethane foam, respectively, analyzed by GC-MS. Chronic toxicity and probabilistic risk assessment were performed on 14 PAHs. For chronic toxicity risk assessment, inhalation unit risk was used. Monte-Carlo simulation was performed for probabilistic risk assessment using the mean and standard deviation of measured PAHs. Results: The concentration of particle total PAHs was highest in autumn. The gas phase concentration was highest in autumn. The average gas phase distribution ratio of low molecular weight PAHs composed of 2~3 benzene rings was 85%. The average of the medium molecular weight composed of 4 benzene rings was 53%, and the average of the high molecular weight composed of 5 or more benzene rings was 9%. In the chronic toxicity risk assessment, 7 of the 14 PAHs exceeded the excess carcinogenic risk of 1.00×10^-6. In the Monte-Carlo simulation, Benzo[a]pyrene had the highest probability of exceeding 1.00×10^-6, which was 100%. Conclusions: The concentration of PAHs in the residential area around the petrochemical complex exceeded the standard, and the excess carcinogenic risk was evaluated to be high. Therefore, it is necessary to manage the air environment around the petrochemical complex.

• Clean Technology
• /
• v.7 no.1
• /
• pp.65-74
• /
• 2001

Modified dip-coating method 8.3 times shorten in solution volume-coated and 83.3 times in coating time than existing dip-coating method. Coating weight increased nearly 2~3 times. So modified dip-coating method is evaluated that it is economic and has a efficiency. When we make an experiment in coated $LaCoO_3$ on ceramic monolith in modified dip-coating method which use 2 coating applications with relative viscosity $0.006202kg{\cdot}m/sec$, it showed a superior reaction at 88.56mg per ceramic unit gram in NO-CO reaction(optimum coating amount). When we make an experiment in the same size of ceramic filter cell with different conditions 100, 200cell per square inch, the result in low temperature($200^{\circ}C{\sim}350^{\circ}C$), 200cell3 per square inch is 6~23% higher in NO reduction and 11% in CO oxidation than 100cell per square inch. It is because the more the number of cells in the ceramic filter increase, the more catalytic surface area is expanded.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.6
• /
• pp.258-263
• /
• 2008

The fine aggregates of below 2 mm size was fabricated using by the vertical furnace in which the aggregates could be sintered at floating state and its physical properties were analyzed. The liquid formed at the surface of specimens sintered at $1200{\sim}l300^{\circ}C$ induced a gas in core to expand so the denser shell and porous core could be produced. The C series specimen fabricated by crushing an extruded body had an irregular shape and sharp edges but those became spheroidized by bloating due to gas expansion inside. The fine aggregates fabricated in this study was as light as floating in the water and had an apparent density of $0.68{\sim}1.08$. The absorption rate was proportioned to a porosity showing that the pores in core was not closed completely. The properties of fine aggregates fabricated in vertical furnace were similar with those of in an electric muffle furnace but the sticking-together phenomenon by surface fusion was not occurred in the vertical furnace. The aggregates fabricated in this study had a little lower impact resistance than that of natural aggregate but satisfied the unit volume weight standard specified in KS.

• Journal of the Korean Society of Safety
• /
• v.31 no.4
• /
• pp.55-63
• /
• 2016

A dust explosion is a phenomenon of strong blast wave propagation involving destruction which results from dust pyrolysis and rapid oxidation in a confined space. There has been some research done to find individual explosion characteristics and common physical laws for various dust types. However, there has been insufficient number of studies related to the heat of combustion of materials and the oxygen consumption energy about materials in respect of dust explosion characteristics. The present study focuses on the relationship between dust explosion characteristics of wood dust samples and oxygen consumption energy. Since it is difficult to estimate the weight of suspended dust participating in explosions in dust explosion and mixtures are in fuel-rich conditions concentrations with equivalent ratios exceeding 1, methods for estimating explosion overpressure by applying oxygen consumption energy based on unit volume air at standard atmospheric pressure and temperature are proposed. In this study an oxygen consumption energy model for dust explosion is developed, and by applying this model to TNT equivalent model, initial explosion efficiency was calculated by comparing the results of standardized dust explosion experiments.

• Journal of the Korean Home Economics Association
• /
• v.19 no.3
• /
• pp.47-61
• /
• 1981

The Siuejunsuh is a book of Korean woman's life in the Yi-dynasty which published late in 18 century by unknown author. I have studied the food habits of the Yi-dynasty that wrote in siuejunsuh as following. The staple foods ae Bab (boiled cooked rice) 2, Juk(gruel) 6, Mieum(thin rice gruel) 3, Uee (liquid) 1, D'ockguk 2, Mandu3 Kinds I this book. the side dishes are Guk(soup) 24, Jochi 7, jungol 2, J'im 16, Sinsollo 1, Bockuem 5, Sun 6, Gui 16, Jock 10, jon 12, jorim 7, Namul 14, Sangchae 4, Hyae 17, Joban 2, Nooruemi 1, Sooranpoached egg) 2, Sondae 2, jockpyun 1, Choe 1, Muchim 11, Pyunuk 2, Jockgall 6, Po 9, Ssam 4, Jup 1, Jangaji 27, Kimchi 20, and other 27 Kinds. the desserts are D'ock 41, jabgwa 52, Beverages 17 kinds. the alcohol and frutie liquor are 18 kinds. The seasonings are soybean sauce, Jinjang, red peper bean paste, Zupjang, Dampukjang, Chunggukjang, honey, vinegar, mustard, Yunzup etc. Storage foods are vegetables,fruits and beans etc. There are 62 kinds of table ware and cooking kitchen utensiles, but many of them came to usefulness. 16 kinds of measuring unit are very non-scientific because that is not by weight but by bulk or volume. Thee are many food making terms which are 179 kinds of prepared cooking term, 22 kinds of cutting term and 16 kinds of boiling term. And 20 kinds of expression of taste can be seen in this book. Food serving methods are D'ockiserving method, fruits and dried food serving methode in chanhap (food packed in a nest of boxes) Guksoo serving method, Jock serving method, fruits serving method, Seup serving method etc. Table setting methods ae 9 sets of dinner, 7 sets of dinner, 5 sets of dinner, side table setting, liquor table setting, Sinsollo table setting, food's dab table setting etc.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.5
• /
• pp.48-57
• /
• 2000

This paper is dealing with the fundamental properties of planting concrete, replacing the existing cover concrete on the roof of a building. This study is to find out the physical characteristics of the planting concrete and rearing characteristics of the grass throughout the modeling experimental materials. As the results of the experiment, the physical properties of planting concrete show the following results; when the paste to aggregate ratio is 0.2~ 0.4, voids volume : 30~17%, unit weight: 1,710~2,010kg/m3, compressive strength : 45~145kgf/$\textrm{cm}^2$, its pH is more than 11, but is reduced to the proper degree for planting after being neutralized. Kentucky bluegrass covered with planting concrete is grown well. The planting concrete used with blast furnace slag cement shows a better properties at the height, the width and the covering rate by 1.1cm, 0.5mm and 7%, respectively, than those used with ordinary portland cement. Also, the less the paste to aggregate ratio is, the better the plant grows. The orders of the effects of temperature control are as follows; the system of planting concrete with grass>the system of planting concrete without grass>the system of mixed soil>the existed roof system. In case, the planting concrete is placed to the roofs of buildings instead of normal concrete slab, and a number of favorable effect can be expected such as the improvement os environmental factors, the reduction of construction cost, the saving of energy and the reduction of environment load. The future research on the change of a variety of the aggregate conditions and the application of the practical structures should be made, and also the research of the endurance also be performed.

• Journal of Korean Home Economics Education Association
• /
• v.9 no.1
• /
• pp.133-143
• /
• 1997

The purposes of the study is to see as to how much of changes has occurred in the newly revised Home Economics Textbooks required by the 6th Curriculum as compared to those by the former the 5th Curriculum, and to seek future policy directions which can be improved even better, if any, for further revision. To implement this proposal, the study employs 8 different textbooks published in 1997 geared for the 6th Curriculum for data base. The components of the contents divides into two major parts. The first part falls into a category of holistic analysis of the textbooks, which gives a general perspective of the changes in the textbook revised. It includes those areas of changes in the total number of pages, cover page, illustrations, table of contents, appendices, unit cover, introductory remarks, summary and evaluation, etc. It also covers the information on authors of textbook. The latter part consists of several specific areas of major changes occurred in the textbooks for the 6th Curriculum. It covers such areas of changes in the composition of category and its weight, laboratory experiences, and illustrations and tables. To conclude the study, among many findings, two major points are of great importance to mention here. First, the new textbooks have adopted more of varieties in physical appearances and contents per se as to the older ones. And yet, there still found a weakness in numbers of authors participated to a full reflection of contents variety. In addition, the background of authors reflected on an unrealistic idealism which lacks the on-site information provided by the school teachers. Second, the strict regulations created by the Ministry of Education for developing textbook found restricting the authors creativity and thus contents variety of textbooks. Those restricting factors include letter type and size, coloring, paper quality, and volume size.