• 농촌계획
• /
• 제23권4호
• /
• pp.39-48
• /
• 2017

National Institute of Environmental Research (NIER) has proposed new methodology for estimating unit load in order to overcome the limitations of past unit load based on short-term and local area based data. In the case of agricultural land, however, the results presented by NIER are still limited because of various agricultural activities and farmland characteristics. In this study, liquid manure treated paddy field and organic farming upland were selected for considering agricultural diversity. Four different methods for evaluating unit load were used for comparing previous research results. The results of different methods presented various trends compared with those of existing studies. Paddy field treated liquid manure was 1.3 times higher for T-N load and 3.1 times for T-P load than conventional paddy field. Conventional upland was 4.4 times higher for T-N load and 1.8 times higher for T-P load than organic farming upland. In the case of non-conventional farmland, this study showed different values with the unit loads presented by NIER. This implies that it is necessary to review and apply the unit loads considering various agricultural conditions when establishing environmental policy and rural planning.

• Archives of Pharmacal Research
• /
• 제20권6호
• /
• pp.633-636
• /
• 1997

In the course of searching for PAF receptor antagonists, pregomisin (1) and chamigrenal (2) were isolated from the fruits of Schizandra chinensis Baill by the bioactivity-guided isolation. Both compounds showed PAF antagonistic activity and the $IC_{50}$ values were $4.8{\times}10^{-5} M and 1.2{\times}10^{-4}M,$ respectively. In addition, the $^{13}C$ NMR assignments of 1 and 2 using DEPT, HMQC, COLOC and HMBC were reported for the first time.

• 대한건축학회논문집:계획계
• /
• 제35권4호
• /
• pp.53-60
• /
• 2019

This study intends to examine the changes found in the unit floor plans of the apartments built in Beijing from 1979 to 2018. For the 3 - bedroom type apartments, 40 unit floor plans were collected, and the changes of integration values of each space were analyzed periodically in four phases. The unit floor plans are analyzed in the context of the Space Syntax Model and compared to the lifestyle and societal changes in China. The results of the study indicate the followings: As time went by, the living room and the dining room were separated from each other with the increasing area of the apartment unit floor plans. The function of the integrated living room was dispersed, and the integration of the living room and the dining room decreased with the change of time. In the third phase, the dining room occupied the center of the unit floor plans with the highest integration value; Chinese people prefer to place the kitchen in the relatively deep place in order to prevent oil and smoke caused by their cooking habits like stir-fry; The privacy of the master bedroom has been strengthened.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권3호
• /
• pp.428-432
• /
• 2009

40 goat kid ribcages were held for 7 days in storage conditions ($4^{\circ}C$) and used to determine the effects of three different packaging methods (atmospheric air, vacuum and modified atmosphere package (MAP) 10:70:20 mixture of $N_2:O_2:CO_2$) on meat quality of the chops. L* was affected by the packaging method being lighter than MAP chops. The coordinate a* significantly increased during storage time. For MAP-packed chops and those kept in atmospheric air, b* increased markedly during storage time whereas it remained unaffected throughout storage when in vacuum packages. Final pH values ranged from 5.6 to 5.8 and no effects were found for either storage time or packaging method. WHC means were lowest for the three packaging methods on day 7 of storage and highest on day 1. Storage time increased water loss in vacuum treatments. Trained panel colour acceptability was lower at 3, 5 and 7 days than on day 1 of storage for atmospheric air treatment and vacuum packaging, while for the MAP treatment average values on days 5 and 7 were lower than those observed on days 1 or 3. Trained panel odour was lower for atmospheric air and vacuum packages at 3, 5, and 7 days storage than at 1 day, while no differences were found in trained panel odour acceptability for MAP packages. With reference to consumers, the MAP proposed in the present study is the chosen method for storing goat meat, rather than vacuum or atmospheric air packaging.

• The Journal of Advanced Prosthodontics
• /
• 제10권4호
• /
• pp.291-299
• /
• 2018

PURPOSE. To assess the degree of conversion (DC) and light irradiance delivered to light-cured and dual-cured cements by application of different light sources through various types of monolithic computer-aided design and computer-aided manufacturing (CAD/CAM) materials. MATERIALS AND METHODS. RelyX Ultimate Clicker light-cured and dual-cured resin cement specimens with 1.5-mm thicknesses (n=300, 10/group), were placed under four types of crystalline core structure (Vita Enamic, Vita Suprinity, GC Ceresmart, Degudent Prettau Anterior). The specimens were irradiated for 40 seconds with an LED Soft-Start or pulse-delay unit or 20 seconds with a QTH unit. DC ratios were determined by using Fourier transform infrared spectroscopy (FTIR) after curing the specimen at 1 day and 1 month. The data were analyzed using the Mann-Whitney U test (for paired comparison) and the Kruskal-Wallis H test (for multiple comparison), with a significance level of P<.05. RESULTS. DC values were the highest for RelyX Ultimate Clicker light-cure specimens polymerized with the LED Soft-Start unit. The combination of the Vita Suprinity disc and RelyX Ultimate Clicker dual-cure resin cement yielded significantly higher values at both timepoints with all light units (all, P<.05). CONCLUSION. Within the limitations of this study, we conclude that the DC of RelyX Ultimate Clicker dual-cure resin cement was improved significantly by the use of Vita Suprinity and the LED Soft-Start light unit. We strongly recommend the combined use of an LED light unit and dual-cure luting cement for monolithic ceramic restorations.

• 상하수도학회지
• /
• 제31권5호
• /
• pp.447-457
• /
• 2017

This study derived the unit of industrial water usage reflecting the latest industry trends. Available for establishing plans such as the master plan for water supply system and analyzed changes in the basic unit by a comparison with the current basic unit values. This study analyzed 4,038 samples with a sampling error of less than 1.5 % at the 95 % confidence level after removing outliers according to a log-normal distribution. As a result, the unit of industrial water usage per site area in the whole manufacturing industry was 7.11 m3/1,000m2/d. The ten industrial categories (C10, C13, C20, C21, C22, C25, C27, C30, C32, C33) showed a similar unit value compared to before, and the four industrials categories (C11, C17, C22, C31) showed a more unit value than before. With regard to the nine industrial categories (C14, C15, C16, C18, C19, C24, C26, C28, C29), the unit value decreased. Cases that companies examined before were the same as the companies examined in this study were analyzed. The result that the changes in the unit industrial water usage were reasonable was obtained. However, in some industrial categories (C17, C14, C24, C29), the unit value was changed by a small number of companies with large-scale water use or unit value of sampling had a large deviation. It was considered necessary to survey them periodically. The unit of industrial water usage derived by the survey in this study reflects the current industrial trends in 2016. Water use in manufacturing companies has continuously changed by the development of manufacturing technologies and simplification of manufacturing processes. In order to deal with this, it is considered necessary to survey the usage of industrial water periodically from a long-term perspective.

• 한국식품영양과학회지
• /
• 제30권4호
• /
• pp.760-763
• /
• 2001

시판되는 새우젓의 새로운 기능성 지표를 제시하고자 단백분해효소의 활성 및 키토산 분해활성 등을 측정하였다. 시판 되는 새우젓의 염도를 측정한 결과. 29.8~48.3%로 제품에 따라 최대 19% 정도의 염도 차이를 보였다. 총질소량은 3510.5 ~7314.1 mg/100g 으로 A시료가 7314.1 mg/100 g으로 가장 높은 총질소 함량을 보인 반면 D 시료는 3510.5 mg/100 g으로 비교적 낮은 총질소 함량을 보였다. 아미노태 질소량은 321.2~723.9 mg/100g으로 총질소 함량이 가장 낮았던 D시료가 아미노태 질소 함량이 낮았다. 5개 시판 새우젓의 평균 펩타이드 길이(average peptide length: APL)는 10.1~15.0이었다. 휘발성 염기질소는 14.1~98.6mg/100g 으로 D시료에서 가장 높은 98.6mg%의 함량을 보였다. 단백질 분해효소 활성은 18~232 unit로 차이를 보이고 있으며 C번 시료의 단백질 분해 효소 활성이 232 unit로 가장 높은 효소활성을 보였다. Chitinase 활성은 14.4~171 unit의 활성을 보였으며 E번 새우젓이 171 unit로 가장 높은 효소 활성을 보였다.

• 콘크리트학회논문집
• /
• 제14권4호
• /
• pp.457-466
• /
• 2002

현대사회에서 건설전반에 보편화되어 있는 레미콘은 다양한 사용재료의 물리 화학적 성분이 생산지 및 조성광물에 따라 다르므로 구해지는 결과 값 또한 무수한 변수가 있기 마련이다. 또한 콘크리트의 배합설계는 배합요소의 다변화로 인해 정확한 검정은 그리 간단하지가 않다. 신경망의 학습에 소요되는 시간은 컴퓨터의 성능 및 학습횟수(epoch)에 따라 다르고, 학습시 학습횟수를 최고 백만번까지 반복하도록 하였으며 학습 종료조건으로 최소자승법에 의해 목표 오차량이 0.10~0.001 사이가 될 때까지로 하였다. 신경망의 적용에는 현재 경북지방에 위치한 레미콘 회사중 A, B사에서 사용하는 콘크리트 시방배합표를 가지고 신경망 이론에 따라 학습시킨 후에 물시멘트비, 잔골재율, 단위수량, 단위시멘트량, 강모래의 단위량(S1), 부순모래의 단위량(S2), 단위굵은골재량 혼화제량을 추정하였고, 다음으로 압축강도 및 슬럼프 값을 각각 추정하였다. 배합요소 추정의 검정에 사용된 규격으로는 호칭강도 180~300kgf/${cm}^2$, 목표슬럼프값 8cm, 15cm를 사용하였고, 압축강도 및 슬럼프 값 추정에 사용된 규격으로는 회사별 최근 생산량이 가장 많은 호칭강도 210~240kgf/${cm}^2$, 목표 슬럼프 값 12, 15cm를 각각 사용하였다. 본 논문에서는 컴퓨터에 의한 학습 및 시뮬레이션을 통해 콘크리트의 배합요소, 압축강도 및 슬럼프 값을 추정하여 직접 실험 값과 비교함으로써 실험을 통하지 않고도 콘크리트의 배합요소 및 강도를 추정하는데 목적이 있다. 결과적으로 압축강도 및 슬럼프의 추정은 회사에 관계없이 오차량에 만족하여 수렴하는 것으로 나타나 인공신경망이론이 압축강도 및 슬럼프를 예측하는데 효율적인 것으로 판명되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.712-714
• /
• 2002

Through the Standard of UL489, the Adjustable Type Instant Trip Unit should NO trip at 80% of each current from $5{\times}In$ to $10{\times}In$ and trip 130% of those. In this paper, we obtain the attraction force between Fixing Magnet and Moving Armature. we simulated the modelling by 3D Finite Element Method. With values of experiment and simulated values, in this paper, we show the method for set up the process of designing Instant spring.

• 가정과삶의질연구
• /
• 제19권1호
• /
• pp.205-219
• /
• 2001

This study analyzes consumer education for consumption values in the elementary school textbooks to provide information useful in revising the curriculum in the future. The textbooks for the 4th, the 5th, and 6th curricula, which are 334 volumes in total, are analyzed by the context-analysis method. Context unit is used as the analysis unit and the number of pages is used as the system of enumeration. According to the analysis, the areas taught most frequently in current curriculum are \"frugality and reuse\" and \"the planned consumption\", while the areas taught least are \"impulsive and conformity consumption\" and \"the concept of consumer and the consumers role\". It was also found that current programs are not well organized in terms of continuity, sequence, and integration.