• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 E
• /
• pp.1890-1892
• /
• 1997

In this paper, we have designed and fabricated high speed signal processing unit, optical driver and sensing unit in order to develop a distributed optic fiber sensing and measuring system using the rayleigh backscattering. To define the functions, we have constructed a testing system(1.1[km]), done the characteristics test.

• Journal of Electrical Engineering and Technology
• /
• 제10권5호
• /
• pp.2099-2104
• /
• 2015

The paper presents a monitoring system for the cooling of distribution transformers. The suggested system is controlled by a microcontroller scheme. The system is designed to control the oil temperature. It gives a solution to improve the cooling system by adding a number of fans especially for indoor transformers that are placed in badly-ventilated rooms. Also, the paper includes an alarm system with the possibility of tripping the transformer if it is necessary. The monitoring system consists of acquisition temperature sensor, and on-site unit. The hardware and software of the on-site unit are demonstrated with sufficient illustrations. Small prototype is constructed in the laboratory. Some laboratory experiments are carried out for examining the designed circuit by using Proteus Virtual System Modeling as well as for testing the prototype monitoring system. Concerning this research point, a study is carried out to evaluate the economic feasibility. The results are recorded and associated with many recommendations that may be valuable to electrical distribution (utility) companies.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.15-18
• /
• 2003

Development of the construction industry generally exhausts natural aggregate. Hence it is problem to the lack of supply and quality deterioration, so the resource saving and protection of environment is made an effort through recycling by-product. This study presents that fundamental properties of concrete which used cooper slag as alternate sand of low fineness modulus and plan of cooper slag as concrete aggregate. Testing factors are concrete's slump, air contents, unit weight and compressive strength. The results of this study are as follows; (1) Concrete slump is generally satisfied with the condition but is inferior to the others in substitution rates 30%. Also air contents are 3.1-4.1% and go up according to increase substitution rate. (2) Unit weight increase in 1.1% as the mixing ratio of cooper slag argument 10%. (3) compressive strength of cooper slag concrete is similar to plain and especially higher 11-15% in W/C 45%, 50%. So it seems that aggregate mixed cooper slag is suitable to low water-cement ratio mixture.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.92-96
• /
• 1997

Recently, the life cycle of products is rapidly shortened and then the disposal of the used mold applied in development of the product is a difficult thing. In this study, we proposed the feasibility of new 3plate type mold base for recycling by analyzing of the existing standard mold base. And in order to apply new 3plate mold base in mold design and making, we constructed the specifications for parts such as runner stripper plate, cavity plate, core plate and slide core unit. Also, we confirmed the possibility of recycling mold base by testing a used 3plate mold for a Audio front pannel.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.125-128
• /
• 2001

In this paper, we propose a low power Scan-based Built-ln Self Test based on circuit partitioning and pattern suppression using modified test control unit. To partition a CUT(Circuit Under Testing), the MHPA(Multilevel Hypergraph Partition Algorithm) is used. As a result of circuit partition, we can reduce the total length of test pattern, so that power consumptions are decreased in test mode. Also, proposed Scan-based BIST architecture suppresses a redundant test pattern by inserting an additional decoder in BIST control unit. A decoder detects test pattern with high fault coverage, and applies it to partitioned circuits. Experimental result on the ISCAS benchmark circuits shows the efficiency of proposed low power BIST architecture.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.644-649
• /
• 2001

A new electrostatic separator has been developed for the removal of unburned carbon from fly ash. In this separator, a flowing film of fly ash is created on the surface of a vibrating electrode. Conducting particles such as unburned carbon acquire electrostatic charges and jump out of the flowing film so that they can be removed from the non-conducting fly ash particles moving forward. The new separator has been tested successfully using a pilot-scale test unit at 0.5 tons/hr capacity. Based on the successful test results, a larger unit is being constructed at the present time.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.519-524
• /
• 2007

In this study, NR GT 101 (water-to-water Ground source heat pump unit) and NR GT 102 (water-to-air Ground source heat pump unit) related with ISO and ARI guideline were introduced and researched. GSHPs testing was performed by NR GT 101, 102 and analyzed performance factors. Test result, Energy Efficiency Ratio and Coefficient of performance factor of GSHPs were relatively low at an average value rather than Certification.

• 기술혁신연구
• /
• 제10권2호
• /
• pp.91-105
• /
• 2002

This paper extends the empirical analysis on R&D based growth model so that the nonstationary panel unit root testing methods can be used to distinguish the exogenous growth model and R&D based growth model for the 1981-1999 period with fourteen OECD economies including Korea. Our results show that first, using U.S. and Group mean as benchmarking, the stochastic R&D productivity convergence to benchmarking is not supported in our data set. Second, the empirical results for stochastic nonconvergence to the U.S. or group mean also are robustness to panel unit root methods. We, therefore, find strong support for the implications for R&D based growth model.

• Communications for Statistical Applications and Methods
• /
• 제4권3호
• /
• pp.903-909
• /
• 1997

The ordinary least squares estimator and the corresponding pivotal statistics have been widely used for the unit test. Recently several test criteria based on maximum likelihood estimators and weighted symmetric estimator have been proposed for testing the unit root hypothesis in the autoregressive processes. Pantula at el. (1994) showed that the weighted symmetric estimator has good power properties. In this article we use an adjusted estimator for mean in the model when we use weighted symmetric estimator. A simulation study shows that for the small samples, this new test criterion has better power properties than the weighted symmetric estimator.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2001년도 하계 학술대회 논문집(KISPS SUMMER CONFERENCE 2001
• /
• pp.73-76
• /
• 2001

High-level synthesis(HLS)는 주어진 동작(behavior)과 면적(area), 성능(performance), 전력 소비량, 패키징, 테스팅등의 주어진 제한을 만족하게 구현된 구조적 디자인을 생성한다. 즉 high-level synthesis란 디지털 시스템의 알고리즘 단계 서술로부터 레지스터 전달구조의 구현에 이르는 과정을 의미한다. 이러한 high-level synthesis의 과정은 컴파일, 분할(partitioning), 스케줄링(scheduling)등의 단계를 거쳐 디지털 시스템을 설계할 수 있다. 본 논문에서는 high-level synthesis의 단계 중 스케줄링 과정에서 제한조건이 실리콘 면적으로 주어지는 경우에 최적의 functional unit의 수를 찾아내어 최소의 control step에 효과적으로 스케줄링 가능한 알고리즘을 제안하였다.