• 한국농공학회논문집
• /
• 제57권6호
• /
• pp.59-68
• /
• 2015

Traditional structure analysis method is based on numerical matrix analysis to use the geometries consisting of the structure. The characteristics require a lot of computer memories and computational time. To avoid these weaknesses, new approach to analyze truss structure was suggested by adopting topological load redistribution method. The axial forces to be not structurely analyzed yet against outside loads were redistributed by using nodal equation of equilibrium randomly at each node without constructing global matrix. However, this method could not calculate the axial forces if structure is statically indeterminate due to degree of many indeterminacies. Therefore, to apply the method suggested in this research, all redundancies of truss structure were replaced by unit loads. Each unit load could make the deformation of a whole structure, and a superposition method was finally adopted to solve the simultaneous equations. The axial forces and deflections agreed with the result of commercial software within the relative error of 1 %, whereas in the case that the axial forces are relatively very smaller than others, the relative errors were increased to 2 %. However, as the values were small enough not to be considered, it was practically useful as a structural analysis model. This model will be used for structural analysis of truss type of large structure such as agricultural farming facility.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 춘계학술발표대회 논문집
• /
• pp.220-223
• /
• 2003

The methodology of micromechanical finite element method (MFEM) is proposed to calculate the micromechanical strains on fiber and matrix under mechanical and thermal loadings. For micromechanical analysis, composite structure is idealized the square and hexagonal unit cells. Boundary conditions are determined to calculate the effective material properties of composites and the strain magnification matrix. And they are verified by comparing with the results from multi cells, and the strain distributions of the unit cells are in accordance with those of the multi cells. Finally, the effective material properties of composite structure are obtained with respect to its fiber volume fraction and compared with results from rules-of-mixture.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제12권3호
• /
• pp.270-277
• /
• 2012

This paper presents a new DAC design strategy to achieve a wideband dynamic linearity by increasing the bandwidth of the output impedance. In order to reduce the dominant parasitic capacitance of the conventional matrix structure, all the cells associated with a unit current source and its control are stacked in a single column very closely (stacked unit cell structure). To further reduce the parasitic capacitance, the size of the unit current source is considerably reduced at the sacrifice of matching yield. The degraded matching of the current sources is compensated for by a self-calibration. A prototype 6-bit 3.3-GS/s current-steering full binary DAC was fabricated in a 1P9M 90 nm CMOS process. The DAC shows an SFDR of 36.4 dB at 3.3 GS/s Nyquist input signal. The active area of the DAC occupies only $0.0546mm^2$ (0.21 mm ${\times}$ 0.26 mm).

• 한국콘텐츠학회논문지
• /
• 제8권1호
• /
• pp.68-74
• /
• 2008

데이터베이스로부터 지식을 발견하고 이를 연구기획자, 정책의사결정자들이 활용하는 움직임이 전세계적으로 활발해지고 있다. 이러한 연구분야 중 대표적인 것이 계량정보학이고 이 분야를 지원하기 위해서 주로 선진국을 중심으로 분석시스템이 개발되고 있다. 그러나 외국의 분석시스템은 실제 수요자의 요구를 충분히 반영하지 못하고 있고, 고가이면서 한글이 지원되지 않아 국내 연구기획자가 사용하기에 어려운 점이 있다. 따라서 한국과학기술정보연구원에서는 이러한 단점을 극복하기 위해서 계량정보분석시스템 KnowledgeMatrix를 개발하였다. KnowledgeMatrix는 논문 및 특허의 서지정보를 분석하여 지식을 발견하기 위한 목적으로 설계된 독립형(stand-alone) 시스템이다 KnowledgeMatrix의 주요 구성을 살펴보면 행렬 생성, 클러스터링, 시각화, 데이터 전처리로 요약된다. 본 논문에서 소개하고 있는 KnowledgeMatrix는 외국의 대표적인 정보분석시스템과 비교했을 때 다양한 기능을 제공하고 있고 특히 영문데이터 처리 이외에 한글데이터 처리가 가능하다는 장점을 갖고 있다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1997년도 가을 학술발표회 논문집
• /
• pp.42-49
• /
• 1997

In this paper, the method for soil-structure interaction analyses in the time domain is proposed. The far field soil region which is the outside of the artificial boundary is modeled by using explicit frequency-dependent two dimensional infinite elements which can include multiple wave components propagating into the unbounded medium. Since the dynamic stiffness matrix of the far field soil region using the proposed infinite elements is obtained explicitly in terms of exciting frequencies and constants in the frequency domain, the matrix can be easily transformed into the displacement unit-impulse response matrix, which corresponds to a convolution integral of it in the time domain. To verify the proposed method for soil-structure interaction analyses in the time domain, the displacement responses due to an impulse load on the surface of a soil layer with the rigid bed rock are compared with those obtained by the method in the frequency domain and those by models with extend finite element meshes. Good agreements have been found between them.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권12호
• /
• pp.723-731
• /
• 2005

The $4{\times}4$ homogeneous transformation matrix is a compact representation of orientation and position of an object in robotics and computer graphics. A coordinate transformation is accomplished through the successive multiplications of homogeneous matrices, each of which represents the orientation and position of each corresponding link. Thus, for real time control applications in robotics or animation in computer graphics, the fast multiplication of homogeneous matrices is quite demanding. In this paper, a parallel-architecture vector processor is designed for this purpose. The processor has several key features. For the accuracy of computation for real application, the operands of the processors are floating point numbers based on the IEEE Standard 754. For the parallelism and reduction of hardware redundancy, the processor takes column vectors of homogeneous matrices as multiplication unit. To further improve the throughput, the processor structure and its control is based on a pipe-lined structure. Since the designed processor can be used as a special purpose coprocessor in robotics and computer graphics, additionally to special matrix/matrix or matrix/vector multiplication, several other useful instructions for various transformation algorithms are included for wide application of the new design. The suggested instruction set will serve as standard in future processor design for Robotics and Computer Graphics. The design is verified using FPGA implementation. Also a comparative performance improvement of the proposed design is studied compared to a uni-processor approach for possibilities of its real time application.

• The Korean Journal of Ecology
• /
• 제21권6호
• /
• pp.791-797
• /
• 1998

An attempt to clarify the landscape structure of urban areas was carried out on Mt. Hwangryung located in the center of Pusan, southern Korea. By means of aerial photographs and field survey, a vegetation map including land-use pattern was made. Landscape structure was described by analyzing the vegetation map. Landscape element types were classified into secondary forest, introduced plantation, and other elements including urbanized area. almus firma and Pinus thunbergii communities, introduced plantation elements, formed matrix and some secondary forest elements and the other artificial plantations of small scale tended to distribute as small patches in such matrix. The number of patches per unit area in secondary forest elements was more than that in introduced plantation element. The result on patech size was vice versa. As the results of landscape ecological analyses, it was estimated that differentiation of patches recognized in community level would be related to artificial interference and those in sub-communities levels to natural process such as progression of succession. On the other hand, restoration plans in viewpoints of restoration and landscape ecology were suggested to improve ecological quality of Mt. hwangryung.

• 대한화학회지
• /
• 제28권4호
• /
• pp.205-209
• /
• 1984

Thiosinamine, $H_2NCSNHCH_2CHCH_2$의 결정 및 분자구조를 X-선 회절법으로 규명하였다. 이 결정은 공간군 $P2_1/a$의 단사정계에 속하며 단위세포상수는 a = 9.819(3), b = 8.553(3), c = 9.170(2)${\AA}$, ${\beta}$ = 127.3(1)$^{\circ}$이고 z = 4이다. 814개의 회절 반점에 대한 강도 data는 Rigaku-Denki 자동 4축 회절기를 써서 얻었다. 구조는 직접법과 Fourier법으로 규명하였으며 좌표의 정밀화는 Full Matrix 최소 자승법에 의하여 행하였고 최종의 R값은 0.046이다. Thiourea moiety는 평면이며, 결합길이와 결합각은 thiourea unit를 포함하는 화합물에서 얻어진 값들과 잘 일치하고 있다. 분자들은 결정내에서 b축을 따라 두 종류의 N-H${\cdots}$S수소결합에 의하여 상호 결합하고 있다.

• 대한전자공학회논문지SD
• /
• 제43권9호
• /
• pp.31-37
• /
• 2006

Low Density Parity Check (LDPC) code는 최근 그 우수한 성능으로 인하여 4세대 무선 이동 통신용 채널 코딩으로 주목받고 있다. 또한 유럽 디지털 위성 방송 규격인 DVB-S2는 LDPC 코드를 채널 코딩방식으로 채택하였다. 본 논문에서는 인코더와 디코더 양쪽 모두 효율적으로 하드웨어 구현이 가능한 hybrid H-matrix 구조를 이용한 DVB-S2 LDPC 복호기 구조를 제안한다. Hybrid H-matrix는 semi-random 방식과 partly parallel 방식을 결합하여 부호기와 복호기를 동시에 효율적으로 구현할 수 있다. 제안된 복호기 구조에서는 다양한 코드율에 사용되는 Variable Node processor Unit (VNU)을 재사용하기 위한 새로운 VNU와 최적화된 블록 메모리 배치 방법을 이용하였다. 제안된 구조를 이용하여 코드율 1/2의 DVB-S2 LDPC 복호기를 설계하였고 그 결과를 기존의 복호기와 비교하였다.

• 대한건축학회논문집:구조계
• /
• 제35권2호
• /
• pp.29-36
• /
• 2019

Modular construction has benefits such as short construction duration and high productivity owing to the production in factory and owing to simultaneous on-site work. However, rework occurs in modular construction and the rework affects the efficiency of modular construction. The almost of causes of rework are exist in design process. To reduce the cause of rework, the information flow of the design process should be managed and the plan to reduce rework should be included. However, the modular construction has complex process because of impeded unit production so it is hard to manage the information flow in design process. Moreover, when the plan to reduce rework is included, the design process will be more complicated. Therefore, the objective of this research is to suggest the design process including the rework reduction plan and to alleviate the complexity of design process by using Dependency Structure Matrix(DSM). By using DSM, the iteration and feedback in design process is reduced and it can be expected that rework in modular project can be reduced by using suggested design process.