• Journal of the Korean Geosynthetics Society
• /
• 제23권2호
• /
• pp.53-62
• /
• 2024

Recently, development of non-traditional energy such as oil sands has been actively conducted in the cold region such as Canada. Frozen soil has different thermal and mechanical characteristics from general soil due to its high organic contents. This study evaluated the impact of organic matter content on the thermal and mechanical behavior of frozen soil samples collected from Alberta, Canada, and Gangwon Province, South Korea. As the organic content increases, the maximum dry unit weight decreases and the optimum moisture content increases in compaction tests. In uniaxial compression tests under frozen conditions, the strength of the frozen specimens increased as the temperature decreased. The strength of Canada soil sample increased with higher organic matter content at low temperatures. However, the strength of frozen soil was not significantly affected by organic matter content due to the complex behavior and unfrozen water content. Thermal conductivity tests showed higher thermal conductivity in frozen conditions compared to unfrozen conditions, due to the higher thermal conductivity of ice compared to water. These findings provide essential data for geotechnical design and construction in large-scale projects such as oil sands development in cold regions. Further research is needed to explore the impact of organic matter content on different types of frozen soils.

• The Journal of the Acoustical Society of Korea
• /
• 제43권1호
• /
• pp.103-111
• /
• 2024

Axial-flow fans are used to transport fluids in relatively low-pressure flow regimes, and a variety of design variables are employed. The tip geometry of an axial fan plays a dominant role in its flow and noise performance, and two of the most prominent flow phenomena are the tip vortex and the tip leakage vortex that occur at the tip of the blade. Various studies have been conducted to control these three-dimensional flow structures, and winglet geometries have been developed in the aircraft field to suppress wingtip vortices and increase efficiency. In this study, a numerical and experimental study was conducted to analyze the effect of winglet geometry applied to an axial fan blade for an air conditioner outdoor unit. The unsteady Reynolds-Averaged Navier-Stokes (RANS) equation and the FfocwsWilliams and Hawkings (FW-H) equation were numerically solved based on computational fluid dynamics techniques to analyze the three-dimensional flow structure and flow noise numerically, and the validity of the numerical method was verified by comparison with experimental results. The differences in the formation of tip vortex and tip leakage vortex depending on the winglet geometry were compared through a three-dimensional flow field, and the resulting aerodynamic performance was quantitatively compared. In addition, the effect of winglet geometry on flow noise was evaluated by numerically simulating noise based on the predicted flow field. A prototype of the target fan model was built, and flow and noise experiments were conducted to evaluate the actual performance quantitatively.

• Asia-Pacific Journal of Business
• /
• 제14권4호
• /
• pp.67-85
• /
• 2023

Purpose - This study seeks to investigate the determinants of global sourcing intention in clothing sewing industry, in particular with its focus on women's knit wear production. Design/methodology/approach - This study collected a unique set of qualitative data through 31 in-depth interviews with fashion brands, promotion agencies, and sewing factories between July 2023 and October 2023. In addition, it analyzed the dataset using the MAXQDA to complement the research findings. Findings - We have two findings. First, the interviewees commonly mentioned the following factors as reasons for considering global sourcing: the human factors(aging of skilled technicians and labor shortages), the financial factors(gap in production unit prices at home and abroad), the relational factors(lack of novelty), and the physical factors(loss of production infrastructure and network), while the human factors(skilled workforce), the production factors(delivery date and product quality), and the relational factors(timely communication and mutual trust) as reasons for continuing domestic sourcing. Additional code analysis of interview also supports this finding. On the other hand, there was also a subtle difference between buyers(brands) and suppliers(promotion agencies and processing plants), and buyers consider the exact delivery date critical so that they could see trend-sensitive women's knit wear on time, and suppliers took production costs, labor costs, and labor shortages, which are financial factors, more seriously. Research implications or Originality - This study provides a richer and more balanced view of existing literature, which has generally tended to introduce global sourcing across the clothing industry despite the existence of various diversity within the industry. In addition, through qualitative research, we introduce that the sewing industry is carried out according to complex factors, and by revealing and categorizing the determinants of global sourcing, we supplement the existing research on the clothing sewing industry centered on survey. On a practical note, this study introduces that there is a difference in view of domestic sourcing and global sourcing between buyers(brands) and suppliers(promotion agencies and sewing factories), suggesting practical implications for revitalizing networks and deriving win-win cooperation network models among members in the future.

• Journal of The Korean Association For Science Education
• /
• 제44권4호
• /
• pp.301-311
• /
• 2024

We developed a small-group training program for in-service teachers focused on scientific modeling. We collected the discourses of the teachers who participated in the activity and analyzed them by type. The training program employed a collaborative approach in which a small group completed tasks and produced outputs based on the theme of 'galaxies and the Universe' to enable practical application in classes. Three in-service science teachers participated in the training program. Their discourses were recorded, transcribed, and classified into types based on individual turns and interaction units. The language expressions of the teachers reflected the unique characteristics of the teaching profession, with each participant having preferred language expression types, albeit with a generally low prevalence of specific language expression types across the participants. Differences in discourse characteristics related to the modeling theme, task presentation method, and model types, revealed that variations in the proportion of interaction unit types during the modeling design, build, and evaluation stages were primarily influenced by the teachers' familiarity with the modeling theme. While the task presentation method also influenced interaction types, model types had little impact on the distribution of interaction types. Considering these findings, training programs on modeling for in-service teachers should include a checklist to encourage sufficient interaction between participants as well as propose proper questions that can be effectively addressed through collaboration.

• Journal of the Korean Institute of Landscape Architecture
• /
• 제46권3호
• /
• pp.1-13
• /
• 2018

Landscape Architecture is a minority manpower field that requires wide knowledge and experience. Therefore, the service market is narrower than other fields, and education service for practitioners is lacking. The purpose of this study is to propose e-learning content development methodology that can provide customized landscaping practical education according to the level of education and increase the economic efficiency of the development process. First, in theoretical review, the ADDIE model was modified to select the curriculum development model that pursues efficiency and introduced the concept of reusing learning objects in the SCORM-based model. In particular, to overcome the problems presented in the precious studies, the analysis and design stages have been strengthened and faculty designers with integrated knowledge of Landscape Architecture and ICT have led the overall phase. The actual development process is based on a step by step procedure--analysis of landscaping practitioners needs and environments, etc., teaching and learning procedures and the design of activities considering contents reuse, the first development such as actual shooting and editing, and the second development reusing the first development content--and was done in the order of evaluation and revision of professionalism and satisfaction. As a result of the study, the space-based courses composed of modular learning objects were first developed as 216 courses in 8 subjects, as 208 courses in 3 subjects in total, in which the modularized learning object are crossed and combined in units and difficulty-based courses were second developed in 216 courses with 3 subjects in total. As a result of the evaluation the satisfaction assessment of the overall satisfaction was 4.20 and the average value of the eight measures was 3.97, both being close to 4.0. For the professional assessment, the scores of 8 subjects were very high at 84.8 to 96.4 points. in context, the scores of 5 subjects were equal to from 89.9 to 96.4 points. In conclusion, as the study was conducted based on a clear understanding of the digital characteristics of e-learning contents and general characteristic of the landscaping industry, it was possible to develop a curriculum by developing a course composed of modular learning objects and reusing learning objects by unit. In particular, it has been proven to be effective in conveying professional knowledge and experiences via general procedures and provided an opportunity to overcome some analog problems that may occur in offline education. In the future, further studies need to be done by expanding the content and by focusing on segmented subjects.

• Journal of the Korean Society for Marine Environment & Energy
• /
• 제16권3호
• /
• pp.202-210
• /
• 2013

As incomes increase, interest in ocean leisure picks up. As a result, a lot of research and developments on hull form design and production of planing boats, mostly used for ocean leisure, are needed. Analysis in researches on resistance of planing boats shows that resistance characteristic of planing boats is different from resistance characteristic of general boats because the former is fast, and its wetted surface is very small. Using Savitsky formula widely used in the calculation of effective horse power in shipbuildingyards, and propulsion system and engine manufacturers, this study calculated total resistance of a research planing boat. Then it analyzed the flow characteristics of the planing boat through theoretical analysis and wind tunnel experiment, and computed air resistance and lift force by changes of speed and trim angle. It also compared and analyzed result of theoretical analysis and experiment of the ratio of air resistance to total resistance under variations of velocity and trim angle. When the study is used to estimate more accurate effective horse power, it is expected to remedy abuses of unnecessarily installing high-powered engine. As nature disasters due to abnormal changes of weather increase, interest in greenhouse gas grows. International Maritime Organization (IMO) legislated Energy Efficiency Design Index (EEDI) and Energy Efficiency Operational Indicator (EEOI) to reduce ship greenhouse gas emissions. But this index will be applied to over 400 tons ships, small ships, emitting more greenhouse gases than larege ships per unit power, will dodge the regulations. Thus, this study indicated a problem by calculating greenhouse gas emissions of an ocean leisure planning boat (a small ship), and suggested the need for EEDI of small ships.

• Journal of Internet Computing and Services
• /
• 제5권5호
• /
• pp.1-15
• /
• 2004

In this paper, we explain the design and implementation of GWB(Gene WorkBench), which is a web-based, integrated system for efficiently managing and analyzing genomic sequences, Most existing software systems handling genomic sequences rarely provide both managing facilities and analyzing facilities. The analysis programs also tend to be unit programs that include just single or some part of the required functions. Moreover, these programs are widely distributed over Internet and require different execution environments. As lots of manual and conversion works are required for using these programs together, many life science researchers suffer great inconveniences. in order to overcome the problems of existing systems and provide a more convenient one for helping genomic researches in effective ways, this paper integrates both managing facilities and analyzing facilities into a single system called GWB. Most important issues regarding the design of GWB are how to integrate many different analysis programs into a single software system, and how to provide data or databases of different formats required to run these programs. In order to address these issues, GWB integrates different analysis programs byusing common input/output interfaces called wrappers, suggests a common format of genomic sequence data, organizes local databases consisting of a relational database and an indexed sequential file, and provides facilities for converting data among several well-known different formats and exporting local databases into XML files.

• Magazine of the Korean Society of Agricultural Engineers
• /
• 제13권2호
• /
• pp.2262-2275
• /
• 1971

Fourteenes rervoirs maintained by the local land improvement associations in the province of Chullabuk-Do and 20 reservoir maintained by thos in the province of Chullanam-Do, were surveyed in connection with a correction between storage capacity and sediment deposit. In addition to this survey, 3,347 of small reservoir, that lie scattered around in the above-mentioned two provinces were investigated by using existing two provinces were investigated by using existing records pertaining to storage capacity in the office of City and country, respectively. According to this investigation the following comclusions are derived. 1. A sediment deposition rate is high, being about $10.63m^3/ha$ of drainage area, and resulting in the average decreasc of storage capaity by 27.5%. This high rate of deposition coule be mainly attributed to the serve denudation of forests due to disorderly cuttings of trees. Easpecially, in small reservoir, an original average design storage depth of 197mm in irrigation water depth is decreased to about 140mm. 2. An average unit storage depth of 325.6mm as the time of initial construction is decreased to 226mm at present. This phenomena causes a greater shortage irrigation water, since it was assumed that original storage quantity was already in short. 3. Generally speaking, seepage rates through dam abutment intakepipe, etc, are high due to insufficient maintenance and management of reservoir. 4. It is recommended that sediment deposit should be dredged when a reservoir is dry in drought. 5. Farmers usually waste excessive irrigation water. 6. Water saving methods should be practiced by applying only necessary water for growing stage of rice. 7. In are as where water defficiency for irrigation is severe, a soil moisture content should be kept at about 70% by applying water once in several days. 8. Tube wells should be provided so as to exploit ground water and subsurface current below stream bed as much as possible. 9. If an intake weir was constructed, a water collection well should be built for the use in drought. 10. Water conservation should be forced by converting devastated forests contained in the drainage area of reservoir to protected forests so as to take priority of yrefor estation, gully control, the prohibition of disorderly cutting of trees, etc. 11. Collective rice nurseries should be adopted, and it should be recommended that irrigation water for rice nurseries is supplied by farmer themselves. 12. Sediment desposit in reservoir should be thoroughly dreged so as to secure a original design storage capacity. 13. The structure of overflow weir should be automatic so as to freely control flood level and not to increase dam height.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• 제44권8호
• /
• pp.52-59
• /
• 2007

In this paper, we analyzed and measured implant isolation characteristics for a 1.25 Gbps monolithic integrated hi-directional (M-BiDi) optoelectronic system-on-a-chip, which is a key component to constitute gigabit passive optical networks (PONs) for a fiber-to-the-home (FTTH). Also, we derived an equivalent circuit of the implant structure under various DC bias conditions. The 1.25 Gbps M-BiDi transmit-receive SoC consists of a laser diode with a monitor photodiode as a transmitter and a digital photodiode as a digital data receiver on the same InP wafer According to IEEE 802.3ah and ITU-T G.983.3 standards, a receiver sensitivity of the digital receiver has to satisfy under -24 dBm @ BER=10-12. Therefore, the electrical crosstalk levels have to maintain less than -86 dB from DC to 3 GHz. From analysed and measured results of the implant structure, the M-BiDi SoC with the implant area of 20 mm width and more than 200 mm distance between the laser diode and monitor photodiode, and between the monitor photodiode and digital photodiode, satisfies the electrical crosstalk level. These implant characteristics can be used for the design and fabrication of an optoelectronic SoC design, and expended to a mixed-mode SoC field.

• Journal of The Korean Association For Science Education
• /
• 제22권4호
• /
• pp.872-881
• /
• 2002

Student questioning is included in the priority of science literacy, to enable students to solve problems by exploring questions, communicating and constructing knowledge(AAAS, 1989). Also, the essence of student questioning in science lies in its function as a link between thinking and learning. But educators did not pay much attention to students' questioning in Korea. The purpose of this study was to investigate the effects of science question enhancement instruction on students' science questioning level and achievement. Also, this study showed the effects of other variables(logical thinking, science achievement, interest, and gender) on students' science questioning level. The pretest-posttest control group design group design was used. The sample was consisted of 80 second grade middle school students in experimental group(Science question enhancement instruction) and 74 students in control group(Traditional learning). Students in both groups were received identical content instruction on the unit 'Structures and functions of plant'. These groups were treated for 15 hours during 6 weeks. Students' questions were rated using the four levels described by the Middle School Students' Science Question Rating Scale(r= .96,)(Cuccio-Schirripa & Steinner, 2000). Science achievement data were collected using a 17 item multiple choice test(Cronbach ${\alpha}$= .84). To investigate students' logical thinking ability, a abridged GALT(Cronbach ${\alpha}$= .69) was used. Five-way ANOVA, ANCOVA, and multiple regression analysis were used to analyze the results. The results indicated that students who received instruction on researchable questioning outperformed those students who were not instructed on high-order questioning(p< .01). Results of correlations indicated that instruction(r= .640), science achievement(r= .311) and logical thinking ability(r= .212) was significantly and positively related with students' questioning level. But, interest and gender did not show any significant correlation with students' questioning level. Science question enhancement instruction was more effective on science achievement than the traditional instruction(p< .01).