• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.3
• /
• pp.625-637
• /
• 2015

This study aims to calculate optimal travel speeds based on analysis of the AVI data collected in the uninterrupted traffic flow, and the results are as follows. Firstly, we looked into the distribution of the sectional travel times of each probe vehicle and compared the difference in the sectional travel speeds of each probe vehicle. As a result, it is shown that outliers should be removed for the distribution of the sectional travel times. Secondly, there were differences among type 1(passenger automobiles) & type 2(automobiles for passengers and freight) and type 4(special automobiles) in the non-congestion section. thus it was revealed that there is a necessity to remove type 4(special automobiles) when calculating the sectional travel speeds. Thirdly, Based on the results of these, the optimal outlier removal procedures were applied to this study. As a result, it showed that the MAPE was between 0.3% and 2.0% and RMSE was between 0.3 and 2.3 which are very similar figures to the actual average traffic speed. Also, the minimum sample size was satisfied at the confidence level of 95%. The result of study is expected to serve as a useful basis for the local government to build the AVI. In the future, it will be necessary to study to integrate AVI data and other data for more accurate traffic information.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.4
• /
• pp.1-11
• /
• 2014

Traffic congestion cost is more likely to occur in the inner city than interregional road, and it accounts for about 63.39% of the whole. Therefore, it is important to mitigate traffic congestion of the inner city. Traffic congestion in the urban could be divided into Recurrent congestion and Non-recurrent congestion. Quick and accurate detection of Non-recurrent congestion is also important in order to relieve traffic congestion. The existing studies about incident detection have been variously conducted, however it was limited to Uninterrupted Traffic Flow Facilities such as freeway. Moreover study of incident detection on the interrupted Traffic Flow Facilities is still inadequate due to complex geometric structure such as traffic signals and intersections. Therefore, in this study, incident detection model was constructed using by Artificial Neural Network to aim at urban arterial road that is interrupted traffic flow facility. In the result of the reliability assessment, the detection rate were 46.15% and false alarm rate were 25.00%. These results have a meaning as a result of the initial study aimed at interrupted traffic flow. Furthermore, it demonstrates the possibility that Non-recurrent congestion can be detected by using car navigation data such as car navigator system device.

• Journal of Intelligence and Information Systems
• /
• v.16 no.1
• /
• pp.57-69
• /
• 2010

The ubiquitous transportation system environments make it possible to collect each vehicle's position and velocity data and to perform more sophisticated traffic flow management at individual vehicle or platoon level through V2V and V2I communication. It is necessary to develop a new data processing methodology to take advantage of the ubiquitous transportation system environments. This paper proposed to build 3-dimension data profiles to maintain the detailed traffic flow information contained in the individual vehicles' data and at the same time to keep the profiles from the meaningless fluctuations. Also methods to build the platoon profile and the shock wave speed profile are proposed, which have not been possible under ITS(Intelligent Transportation System) environments.

• International Journal of Highway Engineering
• /
• v.18 no.5
• /
• pp.117-125
• /
• 2016

PURPOSES : The density in uninterrupted traffic flow facilities plays an important role in representing the current status of traffic flow. For example, the density is used for the primary measures of effectiveness in the capacity analysis for freeway facilities. Therefore, the estimation of density has been a long and tough task for traffic engineers for a long time. This study was initiated to evaluate the performance of density values that were estimated using VDS data and two traditional methods, including a method using traffic flow theory and another method using occupancy by comparing the density values estimated using vehicular trajectory data generated from a radar detector. METHODS : In this study, a radar detector which can generate very accurate vehicular trajectory within the range of 250 m on the Joongbu expressway near to Dongseoul tollgate, where two VDS were already installed. The first task was to estimate densities using different data and methods. Thus, the density values were estimated using two traditional methods and the VDS data on the Joongbu expressway. The density values were compared with those estimated using the vehicular trajectory data in order to evaluate the quality of density estimation. Then, the relationship between the space mean speed and density were drawn using two sets of densities and speeds based on the VDS data and one set of those using the radar detector data. CONCLUSIONS : As a result, the three sets of density showed minor differences when the density values were under 20 vehicles per km per lane. However, as the density values become greater than 20 vehicles per km per lane, the three methods showed a significant difference among on another. The density using the vehicular trajectory data showed the lowest values in general. Based on the in-depth study, it was found out that the space mean speed plays a critical role in the calculation of density. The speed estimated from the VDS data was higher than that from the radar detector. In order to validate the difference in the speed data, the traffic flow models using the relationships between the space mean speed and the density were carefully examined in this study. Conclusively, the traffic flow models generated using the radar data seems to be more realistic.

• Journal of Korean Society of Transportation
• /
• v.27 no.3
• /
• pp.161-168
• /
• 2009

The ubiquitous transportation system environments make it possible to collect each vehicle's position and velocity data and to perform more sophisticated traffic flow management at individual vehicle or platoon level through V2V and V2I communication. It is necessary to develop a new traffic management paradigm to take advantage of the ubiquitous transportation system environments. This paper proposed a preventive congestion management algorithm for uninterrupted flow, whose goal is to minimize the incident potential and maximize the productivity by maintaining traffic flow stability. The algorithm includes the following steps: Processing the raw data to produce the 3-dimension speed/flow/density profile and to produce the platoon profile and the shock wave profile, Determining the traffic state and the flow stability based on the processed data, Deciding the desirable speed the according the traffic flow state, and finally Providing the desirable speed information. It remains as further work to perform field experiments and calibrate the algorithm parameters.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4D
• /
• pp.527-538
• /
• 2011

Currently, the only established criteria is on the location of bus stops on principal roads where uninterrupted flow mainly occurs. There are no clear guidelines on any method to locating bus stops considering the characteristics of bus operation and pedestrians. If the location or exterior of a bus stop is inappropriate, road users including bus drivers and pedestrians will be caused serious dangerous and inconvenience. In this study, the research below was performed in order to propose rational criteria for the location of bus stops integrated with or separated from speed-change lanes at signalized intersections considering smooth traffic flow and the characteristics of bus operation and pedestrians as well as traffic safety : First, the appropriate length of each of the near-side and far-side bus stops was calculated by categorizing bus stops to be constructed into those integrated with speed-change lanes and those separated from speed-change lanes. Secondly, the appropriate length of each of the bus stops divided into near-side bus stops and far-side bus stops and integrated with or separated from speed-change lanes was selected by considering the characteristics of pedestrians. Thirdly, whether the construction locations of bus stops were appropriate or not was determined based on the appropriate length of bus stops integrated with or separated from speed-change lanes, which was calculated and selected by considering traffic flow and the characteristics of pedestrians and considering traffic safety. The method for locating bus stops considering traffic flow, the characteristics of pedestrians, and traffic safety will be able to help suggestion criteria of bus stop and the location of safe and pleasant bus stops.

• Journal of Korean Society of Transportation
• /
• v.20 no.3
• /
• pp.69-82
• /
• 2002

The objective of this study is to evaluate the performance of macroscopic traffic flow models with the analytical and field data. Five candidate models were selected as follows ; Lax Method Model, Upwind Scheme Model, Hilliges'Model, Papageorgiou's Model, and Cell-Transmission Model. In the analytical test scenario, the traffic condition was assumed that could cause the building and dissipation of queue, and each model was compared with analytical solutions and the numerical results. An analytical test indicated that both simple continuum and high order continuum models are able to reproduce queue building and dissipating behavior in a reasonable way A field test has shown that Upwind and Papageorgiou's model show similar performances. Considering the simplicity in model formulation and numerical computation, we firstly recommend Upwind scheme model , and secondly Papageorgiou's model that performed will to represent traffic flow in tests as candidate models for further development of simulation model for Naebu expressway in Seoul.

• Journal of Korean Society of Transportation
• /
• v.19 no.3
• /
• pp.115-131
• /
• 2001

The Purpose of this study is to develop a simulation model for large-scale network with interrupted flow as well as uninterrupted flow. The Cell Transmission(CT) theory is used to simulate traffic flow. Flow transition rules have been newly developed to simulate traffic flows at merging and diverging sections, and signalized intersections. In the model, it is assumed that dynamic OD table is exogenously given. Simulation results for toy network shows that the model can explain queue dynamics not only in signalized intersections of urban arterials, but also in merging and diverging sections of freeway. In case study, the model successfully simulated traffic flows of 145,000 vehicles on CBD network of city of Seoul with 74 traffic zones, 133 signalized intersections among 395 nodes and 1110 links.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1997.04a
• /
• pp.45-60
• /
• 1997

본연구의 목적은 1994년과 1995년의 연구 결과를 토대로 고속국도 교통류의 차량 추종, 차선 변경 특성을 현장 조사 자료를 통하여 분석·규명하고, 국내 고속도로의 교통류 특성을 반영할 수 있는 한국형 고속국도 모의실험 모형을 개발하는데 있다. 본 연구의 주요 결과는 다음과 같다. ▶ 국내 고속국도 교통류의 차두시간, 속도, 차량군의 크기, 차선 변 경, 중차량의 영향 등의 특성을 조사·분석하여 관련 매개변수와 모형식을 도출하였다. ▶ 차량 생성 모형은 개별 차량의 차두시간, 속도를 이용하여 구축하였으며, 중차량의 구성 비 율에 따른 속도 변화를 연구하여 그 결과를 모형 구축에 응용하였다. ▶ 차량 추종 모형은 1995년 연구에서 검증된 PITT-KLD 모형에 기반을 두었으며, 현장 실측 자료를 분석하여 차량 추종과 관련된 매개변수들을 설정하였다. ▶ 차선 변경 모형은 기본적으로 간격 수락 모형을 이용하였으며, 차선 변경시 임계 간격을 국내 운전자들의 유형에 따라 10가지로 설 정하였다. 차선 변경 확률은 현장 조사 자료를 기초로 한 경험적 모형을 구축하여 선정하였 으며, 마코프 연쇄 기법과도 비교·검토하였다. ▶ 개발된 모의실험 모형을 비교·평가하기 위 해 고속국도 합류부의 현장 조사 자료와 모의실험 모형을 비교·평가한 결과, 합류 이전 단 계에서는 실측치와 모형의 통계량이 어느 정도 유사한 양상을 보이지만 합류 이후 단계에서 는 차이를 나타내고 잇다.

• Journal of Korean Society of Transportation
• /
• v.22 no.4 s.75
• /
• pp.147-158
• /
• 2004

A class of SWP(Stochastic Wane Propagation) models microscopically mimics individual vehicles' stochastic behavior and traffic jam propagation with simplified car-following models based on CA(Cellular Automata) theory and macroscopically captures dynamic traffic flow relationships based on statistical physics. SWP model, a program-oriented model using both discrete time-space and integer data structure, can simulate a huge road network with high-speed computing time. However, the model has shortcomings to both the capturing of low speed within a jam microscopically and that of the density and back propagation speed of traffic congestion macroscopically because of the generation of spontaneous jam through unrealistic collision avoidance. In this paper, two additional rules are integrated into the NaSch model. The one is SMR(Stopping Maneuver Rule) to mimic vehicles' stopping process more realistically in the tail of traffic jams. the other is LAR(Low Acceleration Rule) for the explanation of low speed characteristics within traffic jams. Therefore, the CA car-following model with the two rules prevents the lockup condition within a heavily traffic density capturing both the stopping maneuver behavior in the tail of traffic jam and the low acceleration behavior within jam microscopically, and generates more various macroscopic traffic flow mechanism than NaSch model's with the explanation of propagation speed and density of traffic jam.