• Journal of ILASS-Korea
• /
• v.24 no.3
• /
• pp.122-129
• /
• 2019

Flow uniformity in aftertreatment system is an important factor in determining uniform catalytic reaction and filtration. In this study, variety types of DOC-DPF system design were analyzed to increase flow uniformity. For this analysis, ANSYS Fluent was used with porous media setup for DOC and DPF. Turbulent flow was modeled by standard $k-{\varepsilon}$ model excepting porous media. Uniformity index was utilized to evaluate the flow uniformity quantitatively. Reference design showed low velocity region because two large vortex were generated before baffle. When radius of DOC-DPF system was increased, exhaust pressure acting on the inlet decreases and velocity distribution was shifted to one side. When inlet pipe was set to axial center of DOC-DPF system velocity distribution was symmetric. However, flow was not dissipated until the front end of DOC and showed higher uniformity index. When the volume of DOC was reduced while fixed volume of entire DOC-DPF system and baffle plate is located downstream of the DOC-DPF system, there was improvement in uniformity index.

• Molecules and Cells
• /
• v.19 no.3
• /
• pp.428-435
• /
• 2005

This study was carried out to assess the potential of SSR markers for variety identification by comparing SSR markers and morphological traits in tests of distinctiveness, uniformity, and stability (DUS) of pepper (Capsicum annuum L.) varieties. Twenty-seven SSR markers were polymorphic in 66 pepper varieties, revealing a total of 89 alleles. Average polymorphism information content (PIC) value was 0.529, ranging from 0.03 to 0.877. Cluster analysis of the band patterns separated the varieties into three groups corresponding to varietal types. Morphological trait-based clustering showed some degree of similarity to dendrogram topologies based on the SSR index. However, no significance correlation was found between the SSR and morphological data. SSR markers could be used to complement a DUS test of a candidate variety and to select complimentary varieties by pre-screening existing varieties in the context of protecting new varieties of pepper.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.12 no.1
• /
• pp.89-101
• /
• 2010

The purpose of this study was to investigate the fashion item of the symbolic fashion icons in the 20th century. The symbolism of fashion icons was grouped into four classes according to the influence of a social-cultural change. 1. Icons between dream and reality: A dreary emotion that was caused by material richness has a longing for an ideal image. A typical style was Art Nouveau style, which pressed into a grotesque S-bend. While as the world placed on a economic reconstruction after World War I, rational fashion icon which pursued more function and simplify than cumbersome style and complexity came out. 2. Icons between solid and liquid: A solid icons was connected with a mode of female body during World War 1. This extremely stylized female figure. Flowing fabrics enveloped the stylized female figure and they brought a liquid icons into relief. 3. Icons between uniformity and variety: At a time when uniformity was appeared strongly within 20th century is during World War II and about 1940-1950. The uniformal icon was classified into uniformity by uniform and by mass production. A repugnance for the uniformity and imitation of fashion was tried a new fashion style. It could be called with the various of fashion icon. 4. Icons between social secession and rediscovery: In 1950-1960, 1970-1990, and the end of 20th century, the advent of the young culture was born a consumer who newly breaks in fashion. It could be included within the domain of social secession icon. While the rediscovery of fashion icon was associated with experimental new fibers, leotard, suitable replacement for wool or acrylic knit, silk that could stretch in any direction, new fabrics that were transparent, took color beautifully, and could be painted, tie-dyed, or embroidered.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47
• /
• pp.200-215
• /
• 2002

There are some international standards and organization controling the quality characteristics of varieties and seeds such as UPOV, OECD, ISTA, AOSA. The National List system to check variety performance such as quality characteristics of plant varieties and seeds was established by each countries. The UPOV (International Union for the Protection of New varieties of Plant) regulates the requirement of plant variety protection that is distinctness (D), uniformity (U), stability (S) (here in after called DUS), Novelty and Denomination, and some quality characteristics are used to examine the requirement of plant variety protection by each crops. OECD (Organization for Economic Cooperation Development) seed scheme regulates the seed certification for seed trade between countries. ISTA (International Seed Testing Association) and AOSA(Association for Official Seed Analyst) regulates the seed analysis standard and methods. Most of the countries in Europe has the National List system, which check the value for cultivation and use(VCU), that is to say, variety performance such as yield, quality and stress to environment. All the seeds should be enlisted in the National List before sell the seed in their country. All the quality characteristics checked variety performance are for instance, amylose and amylopectin content in rice, molting quality, $\beta$-glucan, protein in barley, protein and sugar content in soybean, sugar and amylopectin content in corn etc. Conditions for the protection of new variety of plant are DUS. Quality characteristics may be the important characteristics and used to check DUS in crop by crop. It is very important to develop a new characteristics and establish standard method fur examine the VCU and DUS test for each crop.

• Asian Journal of Turfgrass Science
• /
• v.12 no.3
• /
• pp.215-224
• /
• 1998

These experiments were conducted to compare the growth characteristics, cold and drought tolerances, disease tolerance and color of the 23 varieties of four different species of cool-season turfgrass introduced from the United States of America and Europe at Yonam College in 1995. Newport and Glade of 8 Kentucky bluegrass varieties were recorded better marks than others. Newport variety was recorded the good marks in the disease tolerance of summer seasons, uniformity, coverage and texture, but the bad marks in color, drought tolerance and rust tolerance and stay green of automn seasons. Glade variety was recorded the good marks in the disease tolerance of summer seasons, uniformity and coverage, but the bad marks in drought tolerance, texture and Pythium blight tolerance. Revel and Revel Jr of 5 tall fescue varieties were recorded better marks than others in color, shoot density, uniformity, coverage, and tolerance of Pythium and Fusarium blight disease. All of red fescue varieties died of disease for rainy season however texture was the finest of all the species in spring season. Dandy of 4 ryegrass varieties was recorded better marks than others in color, shoot density, coverage, drought tolerance and tolerance of Pythium and Fusarium blight disease but texture.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.768-771
• /
• 2006

Uniformity and performance characteristics of LTPS TFTs are important parameters for making advanced active-matrix displays. In this paper, we describe an SLS-based crystallization approach for producing orientation-controlled Si films with reduced concentrations of planar defects that stand to potentially deliver unprecedented levels of device uniformity and performance. Specifically, a 2-step process referred to as hybrid SLS has been developed that produces a variety of high-quality {100} surface-oriented Si films.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.368-375
• /
• 2010

To alleviate NOx emission, a variety of approaches has been applied. In marine diesels, the application of SCR systems has been considered an effective exhaust aftertreatment method for NOx emission control. Most current SCR systems use a various catalyst for the reaction of ammonia with NOx to form nitrogen and water. In theory, it is possible to achieve 100% NOx if the NH3-to-NOx ratio is 1:1. However, the reaction has a limited non-uniformity of the exhaust gas flow and ammonia concentration distribution. Therefore it is necessary to investigate the optimum flow conditions. In order to achieve uniform flow at monolith front face, we are equipped with a various mixed device. In this paper, it is presented that the mixed devices play an important role improvement of flow patterns and particle distributions of NH3 by numerical simulation.

• Journal of computational fluids engineering
• /
• v.15 no.4
• /
• pp.9-16
• /
• 2010

To alleviate NOx emission, a variety of approaches has been applied. In marine diesels, the application of SCR systems has been considered an effective exhaust aftertreatment method for NOx emission control. Most current SCR systems use a various catalyst for the reaction of ammonia with NOx to form nitrogen and water. In theory, it is possible to achieve 100% NOx if the $NH_3$-to-NOx ratio is 1:1. However, the reaction has a limited non-uniformity of the exhaust gas flow and ammonia concentration distribution. Therefore, it is necessary to investigate the optimum flow conditions. In order to achieve uniform flow at monolith front face, we are equipped with a various mixed devices. In this paper, it is presented that the mixed devices play an important role improvement of flow patterns and particle distributions of $NH_3$ by numerical simulation.

• Korean Journal of Environmental Agriculture
• /
• v.42 no.4
• /
• pp.450-456
• /
• 2023

The National Forest Seed and Variety Center aims to write a manual for cultivation and characteristic inspection of new seed varieties in Korea, serving dual purposes. The first is the enhancement of the test guidelines, particularly the distinctness, uniformity and stability (DUS) test, for new seed variety, where research and examination are conducted based on the test guidelines. However, if the crop-specific test guidelines are initially reorganized, the details are unclear. Therefore, it seeks to maintain a written record to prevent confusion when the person in charge is changed. The second is to encourage the development of new varieties. By incorporating general characteristics and cultivation techniques in the manual, it seeks to encourage breeders to develop new varieties. Additionally, it serves as an important chronological record of the creation process, thereby helping future manual authors. This article introduces the current status of new plant variety protection and outlines the significance of creating a manual for cultivation and characterization of Actinidia arguta for screening new varieties.

• Journal of Radiation Industry
• /
• v.7 no.2_3
• /
• pp.101-108
• /
• 2013

To develop new varieties of rapeseed (Brassica napus L.), the seeds of three varieties, 'Naehan', 'Tammi', and 'Halla' were irradiated with proton ion beams and gamma rays with 0 to 2,000 Gy. We had selected 9 lines in $M_5$ generation, and their useful characteristics were investigated by progressing from $M_6$ to $M_7$ generation for checking uniformity and stability. The 9 lines selected in $M_5$ generation were maintained their characteristics in terms of flowering date, maturing date, and plant height through $M_6$ to $M_7$ generations. Especially, 2 lines of NP600-1-1-198-2-1 and NP1000-13-2-362-4-1 selected in $M_5$ generation derived from 'Naehan' had characteristics of early maturity and shorter stem than original variety, and they also were maintained characteristic of early maturity such as 10~11 days earlier flowering date and 6~9 days earlier maturing date through $M_6$ to $M_7$ generations. For stem length, they showed characteristics of shorter stem in 2 lines of NP600-1-1-198-2-1 line and NP1000-13-2-362-4-1 line about 16%, 25% shorter stem than original variety respectively through $M_6$ to $M_7$ generations. Furthermore, some characteristics of 2 lines compared to the original variety were similar or higher in weight of 1,000 seeds, number of branches per plant, number of siliqua per panicle, number of seeds per silique, oil contents, and oleic acid contents. The line with large and plump flowers selected in $M_5$ generation also showed large and dark yellow flowers through $M_6$ to $M_7$ generations. The lines with High oleic acid and low saturated fatty acid contents selected in $M_5$ generation were maintained characteristics through $M_6$ to $M_7$ generation and these useful characteristics were expected for developing a new variety for bio diesel uses.