• Agricultural and Biosystems Engineering
• /
• 제3권2호
• /
• pp.65-72
• /
• 2002

Temperature is the most influential environment parameter which affects the quality change of agricultural products in cold storage. Therefore, it is essential to keep the uniform temperature distribution in the storage room. This study was performed to analyze the air movement and temperature distribution in the forced recirculating cold storage facility and to simulate optimum storage method of green groceries using 3-D CFD(three dimensional computational fluid dynamics) computer simulation which applied the standard $textsc{k}$-$\varepsilon$ turbulence model and FVM(finite volume method). The simulation was validated by the experimental results for onion storage and the simulation model was used to simulate the temperature and velocity distribution in the storage room with reference to the change of storage method such as location of storage, no stores, bulk storage, and pallet storage. In case of no stores, internal airflow was circulated without stagnation and consequently air movement and temperature distribution were uniform. In case of bulk storage, air movement was stagnated so much and temperature distribution of onion was not uniform. Furthermore, the inner temperature of onion roses more than the initial temperature of storage. In case of pallet storage, air movement and temperature distribution of onion were so uniform that the danger of quality change was decreased.

• 대한가정학회지
• /
• 제47권6호
• /
• pp.39-49
• /
• 2009

The purpose of this study were to compare school uniforms made in major and minor companies. Especially, purchasing motives, fitting satisfaction, and mending behaviors of school uniform were compared by middle and high school students. The most evident difference was exhibited in purchasing motive. Brand preference was the most important criterion in purchasing motive from a major company, while good pricing was the most important criterion in purchasing motive from a minor company. Apart from purchasing motive, purchasing behaviors such as fitting satisfaction, mending and mended part of school uniforms were not significantly different in relation to sex, grade, and type of company. These results indicate that major companies should consider lowering their prices and also adopt a high quality strategy for school uniform production. Minor companies need to identify areas of differentiation between themselves and larger companies, and produce niche market products that are for appealing to teenagers with a tendency to orient towards brands instead of quality. Furthermore, mature teenagers as consumers of school uniforms are receptive towards competition for reasonable price.

• Journal of the Korean Data and Information Science Society
• /
• 제26권6호
• /
• pp.1495-1500
• /
• 2015

We obtain means and variances of max {X, Y} and min {X, Y} in the underlying Morgenstern type bivariate uniform variables X and Y with same scale parameters and different scale parameters respectively. And we obtain the conditional expectations in the underlying Morgenstern type bivariate uniform variables. Here, we shall consider the conditional expectations to know the dependence of one variable on the other variable and we consider the behaviors of means and variances of max {X, Y} and min {X, Y} with respect to changes in means, variances, and the correlation coeffcient of the underlying Morgenstern type bivariate uniform variables.

• 복식
• /
• 제60권8호
• /
• pp.67-85
• /
• 2010

School uniform has improved greatly in terms of fit, size, function, and design due to steep competition in the market and the strong interest of researcher, while little effort has been made for physical training uniform, so the objective of this study is to provide basic research data of the training uniform for the improvement of its design and fitness. For this purpose, 327 high school girls provided information on size and design of their uniform, level of satisfaction, the recognized ease in uniform. Most students wore the physical training uniform in another classes and the long sleeved shirt were the most popular one. They often used the uniform for the protection from cold and for comfortable activeness. For a long sleeved shirt, most students preferred raglan sleeve, zip-up collar, straight waist line, and ribbed sleeve cuffs and hem. For long pants, students preferred elastic waist band and ribbed pants cuffs. Currently, the short-sleeved shirt mostly had a shirts collar, ribbed hem, straight waist line with raglan sleeve, but students wanted a round neck and set-in sleeve. For overall level of satisfaction, students showed high satisfaction in terms of function and psychological effect, while aesthetic quality of the uniform was needed to be much improved. Most students evaluated that the circumference of uniforms properly fit or had a little ease, and students considered waist size the most suitable. The long pants length evaluated properly fit or a little long. Students accepted that the ease of summer uniform was more suitable than winter uniform's both at circumference and at length. Depending on students' height distribution, the length of long pants and short pants varied significantly.

• 한국의류학회지
• /
• 제25권2호
• /
• pp.315-326
• /
• 2001

This study is to suggest data for setting school uniform size with the size satisfaction degree through finding out the physical body change and uniform size problems following an increase in age during middle school girl days. For this purpose, by analyzing the physical body size data of 13~15 age of girls among $\ulcorner$human body size data of the youth for product design$\lrcorner$publicized under sponsorship of National Technology Quality Institute in 1999 the physical body size change by part following an increase in age during middle school girl days was found out and the most frequent physical body size by grade was suggested. Questionnaire about uniform production status and product size at the object of uniform makers were measured directly, a school uniform wearing status and size satisfaction degree by part were at the abject of middle school girls were examined by means of questionnaire and unsatisfactory factors in uniform size were found out. Based on collected data the most optimum product size in each part by item were suggested. The method of suggesting the most optimum size suitability by item was decided based on the result of survey into corresponding title and product size by maker and that of survey into the size satisfaction degree of middle school girls by maker, and the product size of maker showing the highest size satisfaction degree was selected as the most optimum product size.

• 품질경영학회지
• /
• 제26권3호
• /
• pp.60-70
• /
• 1998

When driving the expected loss generated by the quality deviation, Taguchi(1991b) assumed that an objective characteristic has the uniform distribution in its control limit. But it is reasonable to assume that an objective characteristic has the normal distribution than the uniform distribution. Since the triangular distribution is similar to the normal distribution and easy to handle as well, in this article, we first find the optimum measurement interval and the optimum control limit under the triangular distribution. Under the normal assumption, the modified method is compared to Taguchi's. Secondly we find the numerical value solution of the optimum measurement interval and the optimum control limit under the normal distribution.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.560-564
• /
• 1996

In recently, annealing process of cold rolled sheet tend to change to continuous annealing process for improving qualify, saving yield. In the meantime as demand for various kind and small lot of products has been increasing, batch annealing has been appreciated for its small restriction for the operation. So, we tested on the effect for a hydrogen contents of atmospheric gas at annealing furnace. As a result of several investigation. We confirmed for the following characteristics ; improved productivity, uniform heating, improved surface quality, saving energy. Therefore, the use of hydrogen instead of nitrogen as the protective gas, combined with high convection in batch annealing furnaces, has shown that considerable increases in furnace output and material quality are attainable. Owing to the low density, high diffusion and reducing character of hydrogen, a better transfer resulting in uniform material temperatures and improved coil surfaces can be achieved.

• 산업경영시스템학회지
• /
• 제20권43호
• /
• pp.47-57
• /
• 1997

As a general index in surface quality of machined products, surface roughness is to measure worker's skill level, a ground product quality and machining accuracy, etc. The surface roughness is defined by a function of rotational speed and radius of a grinding wheel, distances of active grains composed of the wheel, and feed of a grinder's worktable. To predict surface roughness in horizontal surface grinding operations, probability distributions were used. Probability distribution functions(p.d.f.) of surface roughness were found as results when the size of active grains(=the radius of a grinding wheel) is given as uniform, exponential distribution, and the distance between active grains follows the distributions of uniform, exponential. For each pdf case, probabilistic features of surface roughness were also analyzed and presented. This study is a substantial step for determining mathematically the surface roughness instead of using empirical approaches. More works should be presented to develop a general model by which an accurate roughness value can be obtained in horizontal surface grinding operations.

• 방송공학회논문지
• /
• 제21권2호
• /
• pp.200-209
• /
• 2016

본 논문에서는 촬영 시 발생하는 블러 현상을 효율적으로 제거하기 위해 IMU 센서와 노출시간이 길고, 짧은 두 영상을 이용한 비균일 디블러 알고리즘을 제안한다. 종래 센서 정보를 이용한 블러 커널 추정 기법들은 센서 정보의 한계로 인해 성능이 만족스럽지 못하다. 그 한계를 극복하기 위해 우리는 노출시간이 서로 다른 여러 영상들을 이용한 커널 개선 과정을 제안하여, 추정된 커널의 정확도를 향상시킨다. 또한 종래 비균일 디블러 기법들이 블러 커널이 커질수록 심한 화질 열화를 겪는 문제점을 해결하기 위해 본 논문은 호모그래피 기반 잔여 디콘볼루션을 제안하여 디콘볼루션 과정에서 발생하는 링형 현상과 같은 화질 열화를 최소화한다. 실험 결과를 통해 제안 알고리즘의 화질이 기존 기법에 비해 주관적/객관적으로 현저하게 우수함을 볼 수 있다.

• 한국의류학회지
• /
• 제28권11호
• /
• pp.1524-1535
• /
• 2004

The purpose of this study was to develop middle school girl's' school uniform sizing system according to their body types. The data collected with anthropometric measurements from 390 middle school girls aged 12-15 years old was analyzed using t-test, ANOVA, factor analysis and cluster analysis. A new sizing system was developed in accordance with each of the 2 body-type clusters. The analysis of two-way distribution of 'height-bust girth' and 'height-waist girth' was conducted for the girls of the first grade, which is the time when they purchase their school uniforms. The interval of sizing system was defined in consideration with the most efficient distribution of the body sizes utilizing Loss Function. This study also provided Reference-Sizes and Growth-Allowance Measures for each sizing system to help pattern drafting and clothing construction of the uniform manufacturers. The cover ratio of sizing system proposed by this study was higher when compared with that of the National Agency for Technology and Quality and uniform manufacturing companies, Thus, the result of this study is expected to make up the current sizing system of the school uniform.