• Transactions on Electrical and Electronic Materials
• /
• 제18권1호
• /
• pp.35-41
• /
• 2017

This study looks at optimizinge light redistribution to improve the overall illuminance uniformity of commercial IRED modules. To obtain uniform illumination over a prescribed rectangular area, a freeform surface lens was evaluated using TracePro. The LED light overall illuminance uniformity regulated in KSC 7658 was verified using Relux software. Experimental test results showed 0.81 overall illuminance uniformity for rectangular light distribution of LED lights having a radiation angle of $80^{\circ}$. After fabricating prototype IRED lights based on these simulation results, illuminance performance was observed when used as actual IRED lighting with a nighttime CCTV system. Image observation photographs of the prototype $80^{\circ}$ rectangular IRED lights confirmed that object images can be seen clearly owing to high overall illuminance uniformity, and that dark regions of the CCTV screen were not shown.

• 한국정보통신학회논문지
• /
• 제19권4호
• /
• pp.954-964
• /
• 2015

본 연구는 균일한 조명을 얻기 위해 자유 형상 렌즈(freeform lens)를 제작하였으며, 이를 위해 중첩 조명 모델(overlapped illumination model)을 제안하였고, 제작한 LED 렌즈들의 특성을 분석하였다. 제작한 렌즈는 LED 빛 세기 분포의 중심 방향, 반치각 (half angle) 및 LED 광원의 위치변화를 바탕으로 그 성능을 평가하였다. 아울러 조명영역은 평균 조도 (average illuminance)와 조도 균일도 (illuminance uniformity) 변화 값으로 수행하였다. 광도 분포의 중심 방향 변화에 대해서는 제안된 모델과 발산 모델이 대체로 비슷한 공차 특성을 보였으며, 특히 제작한 렌즈에서 반치각 변화는 기존 방법에 비해 조도 균일도 공차 특성은 현저히 개선됨을 확인하였다.

• 조명전기설비학회논문지
• /
• 제22권9호
• /
• pp.1-7
• /
• 2008

본 연구의 목적은 형광등조명기구와 LED 조명기구와의 물리적 특성을 비교하여 LED조명기구의 기본적인 특성을 분석하는데 있다. 여기서 두가지 조명기구의 균제도 및 휘도분포 측면에서 비교 분석하여 LED조명기구를 건축실내공간에 적용하기 위한 자료를 작성하였다. 연구는 4단계로 나누어 진행하였다. 첫째, 기존의 조명기구와 비교한 LED조명광원의 이론적인 검토를 하였다. 둘째, 연구의 목적에 부합되도록 실험변인을 조절할 수 있는 실물대모형(Mock-up)을 제작하였다. 셋째, 설치된 실물대의형을 이용하여 조명기구별 균제도 휘도분포를 측정하였다. 최종적으로, 기존의 형광등기구와 LED조명기구간의 균제도 휘도분포 특성을 비교분석하였다. 연구결과 LED조명기구가 균제도 0.569로 기존 형광등조명기구의 균제도 0.522보다 높아 균일한 조도분포 특성을 보이고 전반확산이 양호한 것으로 나타났다. 또한 휘도분포를 측정한 결과 LED조명기구가 보다 균일한 휘도분포 특성을 보였고, 벽면의 휘도분포는 형광등조명기구에 의한 최대휘도가 $180.6[cd/m^2]$, LED조명기구는 $155.26[cd/m^2]$로 형광등이 높고, 평균휘도는 형광등조명기구가 $44.32[cd/m^2]$, LED조명기구가 $58.65[cd/m^2]$로 LED조명기구가 높게 나타났다. 이상의 결과로 볼 때, LED조명기구가 형광등조명기구보다 재실자에게 보다 쾌적한 작업환경을 구성할 수 있는 조명이라 판단된다.

• KIEAE Journal
• /
• 제9권5호
• /
• pp.105-113
• /
• 2009

Daylighting provides the opportunity for both energy savings and improved visual comfort. An accurate estimation of the amount of daylight entering a building is the key step for daylight designing. This research aims to assess comparative daylighting performance of four different configurations of fenestration in case of unilateral windows and their variation under clear and overcast sky conditions. The selected window openings in this study were single punched, double punched, multiple punched and clerestory, and the area was same for each type of window. The experiment was designed for an office space using 1/10 scale model. Daylighting performance was evaluated by measuring the illuminance on work-plane height using Agilent data logger and photometric sensor Li-Cor. Thecomputer program ECOTECT was also used to simulate the pattern of interior illuminance distribution. Clerestory window showed the best performance in term of both illuminance level and distribution in the experiment. Multiple punched window provided more uniform illuminance distribution than single punched window. Lowest daylighting performance in the experiment was shown by double punched window.

• 한국정보통신학회논문지
• /
• 제21권1호
• /
• pp.157-164
• /
• 2017

본 연구는 균일한 조명을 얻기 위해 중첩 조명 모델(overlapped illumination model)을 사용하여 자유 형상 렌즈(freeform lens)를 제작하였으며, 제작한 LED 렌즈들의 특성을 비교 분석하였다. 제작한 렌즈는 LED 광원의 위치변화, 두께 및 기울임을 이용해 성능을 평가하였다. 아울러 조명영역은 평균 조도 (average illuminance)와 조도 균일도 (illuminance uniformity) 변화 값으로 측정하였다. 광도 분포의 Z축 방향변화에 대해서는 중첩 모델과 발산 모델이 대체로 비슷한 공차 특성을 보였으나, 렌즈두께 변화에 대해서는 중첩모델이 발산모델에 비해 조도 균일도 공차 특성은 현저히 개선됨을 확인하였다. 또한, 발산 조명 모델로 설계된 렌즈가 전반적으로 좋은 성능을 나타냈으나, LED 방출에 대한 성능은 중첩 모델에서 그 편차의 폭이 상대적으로 적게 나타났다.

• Transactions on Electrical and Electronic Materials
• /
• 제13권1호
• /
• pp.16-18
• /
• 2012

LED lighting systems that combine lighting capability, emotional and physiological characteristics are required for lighting source and multifunctional applications. In this work, Simulation studies using optical analysis software packages, Light Tools, are presented. This is done to estimate the uniformity ratio of illuminance and photosynthetic photon flux density (PPFD) of the periodic 2D lattice arrangements, such as square, diamond, two-way bias quadrangular, hexagonal, and Kagome lattices, under the same transmissivity, absorptance and reflectivity. It has been found out that the two-dimensional Kagome lattice arrangement exhibited high uniformity ratio of illuminance and PPFD compared to other lattices. Accordingly, these results can be used to guide a design and improve the lighting environment which in turn would maximize the uniform distributions of illuminance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.567-568
• /
• 2013

• 한국안광학회지
• /
• 제4권2호
• /
• pp.33-38
• /
• 1999

다색 광원에 대한 가우시안 진폭을 갖는 광학계의 결상 특성을 조사하기 위하여 다색 광원에 대한 결상 광학계의 색도(chromaticity) 변화와 조도(illuminance) 분포를 계산하였다. 본 논문에서 고려된 다색 광원은 색온도 2,856K인 텅스텐 백열 램프(incandescent-tungsten lamp)를 나타내는 A광원, 대낮의 평균 햇빛(daylight)을 나타내는 C광원, 대낮의 평균 햇빛의 파장영역을 자외선 영역까지 확대하여 보강한 $D_{65}$광원이다. 다색 광원들의 종류에 따라 기하학적 상점에서의 색도 값이 다르게 나타났으며, 기존의 균일한 진폭을 갖는 광학계에 비해 색도 변화가 매우 작게 나타났다. 조도 분포는 다색 광원의 종류에 따라 거의 변화가 없었으며, 초점 심도는 기존의 균일한 진폭을 갖는 광학계에 비해 크게 나타났다. 이러한 결과로부터 결상 광학계에 입사하는 광의 진폭 형태를 균일한 진폭에서 가우시안 형태로 변조시켜줌으로써 초점 심도는 크게, 색도 변화는 작게 할 수 있다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.140-145
• /
• 2012

The purpose of this study is to understand the change of impression by comparing the uniformity lighting with the compound lighting. In previous study, we proposed a light controlling method to harmonize daylight from a window and artificial lights from a ceiling and obtained the results to support our method. We referred this method as the Adjusted Compound-Lighting Model (AC Model). The model claims that lighting in a room with a side-window are perceived as harmonious when the overall light distribution in the room is well approximated by a compound of lights from the window and the entire ceiling. The experiment is carried out with the scaled-models and mock-up spaces that were supposed to be an office space. One is lit by the uniform lighting and the other by the compound lighting in each experimental space. In order to present varying illuminance distributions, thetwo variables were used in this study. One was the ratio of thelight from the window and ceiling in the standard and evaluation box. The standard box was provided by the ratio of 20% to 40% from the window and 80% to 60% from the ceiling as two lighting ratio patterns [Wu20(=Cu80) and Wu40(=Cu60)]. And the evaluation box was provided by the light ratio of 0% to 40 from the window and 100% to 60% from the ceiling [Wcp0(=Ccp100), Wcp20(=Ccp80) and Wcp40(=Ccp60)]. The other variable was themean illuminance level in both boxes. Two level of mean illuminance (700lx and 300lx) were used in this experiment. Each lighting condition was established at equal horizontal mean illuminance level, held constant near 700lx or 300lx in both boxes. Both of them were similar in the shape of distribution when there were same ratios of lights from the window and the ceiling. Subjects were asked to evaluate the point of difference by semantic differential rating on their overall impression after comparing with two rooms. The results showed that the impressions of compound lighting were more positive score than that of uniformity lighting on the items of 'dim-bright', 'dislike-like', 'artificial-natural' and 'closed-open', and that there was no significant difference in impressions between two spaces on other items.

• 한국태양에너지학회 논문집
• /
• 제31권4호
• /
• pp.136-141
• /
• 2011

The lightshelf system reduces intense illumination levels of indoor from direct sun light and reflect to lead diffused light into indoor deeply. This study aims to design acurved-lightshelf by a ray tracing method and evaluate the daylighting performance of window integrated with the curved-lightshelf by computer simulations. For this purpose, evaluation test model was designed for the experiments to validate the simulation model, and the curved-lightshelf was designed by the ray tracing method using Ecotect. After the office model was designed using 3D simulation, the average indoor illuminance, luminance and distribution of illuminance were evaluated by simulation which has a algorithm of Radiosity and Ray-Tracing method under four different cases(case1;no lightshelf, case2; Flat board, case3; tilted at $30^{\circ}$ angle, case4; the curved-lightshelf). As results, it turns out that case1 showed higher average illuminance and case4 was more uniformly distributed than case2 and case3, In addition average luminance of case1 was also lower. indicating that the curved-lightshelf would reduce the possibility of the glare, while maintaining the sufficient daylight level.