• 상하수도학회지
• /
• 제14권4호
• /
• pp.303-310
• /
• 2000

This study is conducted in order to find more improved solidifying effects than the former converter slag solidification technology. The converter slag is used as a solidifying agent, and the quick lime and the gypsum are used as solidifying aids. Several tests are performed for the purpose of investigating the solidifying effects and the applicability of the solidified sludge as a daily or intermediate landfill cover. The unconfined uniaxial compressive strength, pH and leaching of heavy metal are investigated. In the case of using both quick lime and gypsum as solidifying aids, the compressive strength of specimen has significantly increased that of specimen which used quick lime only. The compressive strength of each specimen cured for 7 days which is mixed with quick lime and gypsum as mixing ratios 7:1, 5:1 and 3:1 are $0.59kg/cm^2$, $1.18kg/cm^2$, and $1.25kg/cm^2$, respectively. The results of all the leaching tests of specimen cured for 7 days show that the concentrations of leachate heavy metals(Cu, Pb, Cd and $Cr^{6+}$) are lower than the Korea toxic waste criteria. The microstructure analysis by SEM shows that needlelike crystals appear as the solidification proceed. The analysis of these crystals by EDS confirms that these main components are Ca. Si etc. Also, XRD analysis shows that the main solidification products are CSH and Ettringite; in addition, $Ca(OH)_2$ CAH are observed. When the added gypsum is used as a solidifying aid, more improved solidifying effects are obtained and the solidified sludge may be appropriately used as a daily or intermediate landfill cover.

• Computers and Concrete
• /
• 제29권1호
• /
• pp.31-45
• /
• 2022

Experimental and numerical simulation were used to investigate the effects of angle and number of T shape non-persistent crack on the shear behaviour of crack's bridge area under uniaxial compressive test. concrete samples with dimension of 150 mm×150 mm×40 mm were prepared. Within the specimen, T shape non-persistent notches were provided. 16 different configuration systems were prepared for T shape non-persistent crack based on two and three cracks. In these configurations, the length of cracks were taken as 4 cm and 2 cm based on the cracks configuration systems. The angle of larger crack related to horizontal axis was 0°, 30°, 60° and 90°. Similar to cracks configuration systems in the experimental tests, 28 models with different T shape non-persistent crack angle were prepared in numerical model. The length of cracks were taken as 4 cm and 2 cm based on the cracks configuration systems. The angle of larger crack related to horizontal axis was 0°, 15°, 30°, 45°, 60°, 75° and 90°. Tensile strength of concrete was 1 MPa. The axial load was applied to the model. Displacement loading rate was controlled to 0.005 mm/s. Results indicated that the failure process was significantly controled by the T shape non-persistent crack angle and crack number. The compressive strengths of the specimens were related to the fracture pattern and failure mechanism of the discontinuities. Furthermore, it was shown that the compressive behaviour of discontinuities is related to the number of the induced tensile cracks which are increased by increasing the crack number and crack angle. The strength of samples decreased by increasing the crack number. In addition, the failure pattern and failure strength are similar in both methods i.e. the experimental testing and the numerical simulation methods (PFC2D).

• 터널과지하공간
• /
• 제28권2호
• /
• pp.156-169
• /
• 2018

퇴적암의 역학적 성질과 구조적 성질간의 관계는 오랫동안 연구되었다. 그러나 암석의 불균질성과 실험에서 여러 구조적 성질 중 오직 하나의 영향인자만을 변화시키는 것의 어려움 때문에 실험 결과들간의 불일치가 관찰되어왔다. 본 연구에서는 인공 퇴적암을 사용해 역학적 성질에 영항을 미치는 모든 요인을 통제할 수 있도록 하였으며, 실제 암석에 비해 균질성을 높였다. 이로 인하여 실험 결과들의 편차가 낮아졌으며, 실제 암석에 대한 실험보다 더욱 명료한 상관관계가 밝혀졌다. 실험에 사용된 시료는 반수석고 파우더를 물과 규사와 혼합하여 만들었으며, 완성된 형태의 인공 퇴적암은 입자 알갱이로서의 모래와, 교결물질로서의 석고로 이루어졌다. 이 인공 퇴적암으로 모래입자의 비율과 크기가 일축압축강도, 탄성계수, 그리고 탄성파속도에 미치는 영향을 분석하였다. 모래입자의 비율을 높일수록 일축압축강도는 줄어들었으며, 탄성계수와 탄성파속도는 증가하였다. 전반적으로 모래입자의 크기는 암석의 역학적 성질과 비선형적인 관계를 보였다. 여기에서의 연구 결과는 추후에 다른 종류의 교결물질이나 입자 알갱이를 사용한 연구와 통합될 수 있다. 이로부터 입자 알갱이나 교결물질의 종류, 혹은 교결물질과 입자 알갱이 간의 상호작용 등이 암석의 역학적 성질에 끼치는 영향에 대한 고찰이 가능할 것이며 그 결과는 다양한 종류의 퇴적암에 적용 가능할 것이다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.213-214
• /
• 2012

This study is about the assessment of utilization possibility as a material for cementation of ground which is necessary for the reinforcement of soft ground by making environment-friendly inorganic composite utilizing inorganic recycled resources, and it was verified that it showed higher uniaxial compressive strength than the existing cementitious ground solidifier when it was applied as a combination material for soft ground such as dredge reclaimed land, and since an inorganic composite utilizing recycled resources such as high calcium fly ash and blast furnace slag etc. does never use cement, it is considered that it would be safe in the issue of a hexavalent chromium that was recognized as a problem of a cementitious solidifier.

• 자원환경지질
• /
• 제21권4호
• /
• pp.359-365
• /
• 1988

Extensive sets of data on the mechanical properties of more than 1000 granite specimens were analyzed to derive the relationships of the various properties: those are, (1) density, (2) porosity, (3) absorption ratio, (4) sonic wave velocity, (5) uniaxial compressive strength, (6) tensile strength, and (7) dynamic & static Young's moduli. The results will be of use to understand the mechanical characteristics of granites and some unknown properties can be estimated from the others. The various equations derived from the least square regression analysis and a brief description of the correlations are presented in this paper.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 가을 학술발표회 논문집
• /
• pp.319-324
• /
• 1994

Bond test was carried out to assess the effect of several variables on bond characteristics between reinforcing bar and concrete. Key variables are concrete compressive strength(low, medium high, and ultra-high), bar diameter(13mm and 22mm), and concrete cover(25mm; 1-inch, 38mm; 1.5-inch, and 51mm; 2-inch). Confining effect and bar spacing are not taken into account. Thirty-two specimens subjected to uniaxial tension were tested under hypothesis uniform bond stress distribution along the reinforcing bar embeded in concrete. Test results(ultimate bond stress) were compared with bond and development provisions of the ACI building Code(ACl 318-89) and local bond stress versus slip relationship diagram represented to show effect of the above variables.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.430-433
• /
• 2006

The reinforced concrete column confined by square steel tubes(RCST) is a reinforced column (RC) confined by thin steel tubes which cover over the full length of the column but terminates 15mm from the column's ends. The steel tube is in uniaxial tension stress state and won't buckle when the column sustains axial load. This will highly increase the bearing capacity and ductility of the columns. The hysteretic behavior of four square RCST columns and one square RC column were experimentally studied under constant axial load and lateral cyclic load. The wide-to-thickness (D/t) ratio of RCST columns employed in this research is 75. The main variables of the experiment were axial load ratio and compressive strength of the concrete. Based on the findings in this research, RCST columns exhibits high lateral strength, ductility, and energy dissipation ability.

• Geomechanics and Engineering
• /
• 제21권3호
• /
• pp.259-268
• /
• 2020

The synthetic rock mass (SRM) were used to investigate the influence of specimen size on the mechanical properties of jointed rock mass. The SRM were established based on parallel bond model (PBM) and smooth joint model (SJM) and the scaled rock specimens were sampled in two SRMs considering three sampling locations. The research results show that the smaller the initial fracture density is, the greater the uniaxial compressive strength (UCS), elastic modulus (E) is when compared with the same sampling location. The mechanical properties of rock specimens obtained by different sampling methods in different SRMs have different scale effects. The strength of rock specimens with more new cracks is not necessarily less than that of rock specimens with fewer new cracks and the failure of rock is caused by the formation of macro-fracture surface.

• Smart Structures and Systems
• /
• 제22권6호
• /
• pp.643-662
• /
• 2018

One of the methods for investigation of mechanical behavior of materials is numerical simulation. For simulation, its need to model behavior is close to real condition. PFC is one of the rock mechanics software that needs calibration for models simulation. The calibration was performed based on simulation of unconfined compression test and Brazilian test. Indeed the micro parameter of models change so that the UCS and Brazilian test results in numerical simulation be close to experimental one. In this paper, the effect of four micro parameters has been investigated on the uniaxial compression test and Brazilian test. These micro parameters are friction angle, Accumulation factor, expansion coefficient and disc distance. The results show that these micro parameters affect the failure pattern in UCS and Brazilian test. Also compressive strength and tensile strength are controlled by failure pattern.

• Geomechanics and Engineering
• /
• 제18권4호
• /
• pp.391-406
• /
• 2019

The aim of this paper was to study the influence of the footing shape and the effect of the roughness of the foundation base on the bearing capacity of shallow foundations on rock masses. For this purpose the finite difference method was used to analyze the bearing capacity of various types and states of rock masses under the assumption of Hoek-Brown failure criterion, for both plane strain and axisymmetric model, and considering smooth and rough interface. The results were analyzed based on a sensitivity study of four varying parameters: foundation width, rock material constant (mo), uniaxial compressive strength and geological strength index. Knowing how each parameter influences the bearing capacity depending on the footing shape (circular vs strip footing) and the footing base interface roughness (smooth vs rough), two correlation factors were developed to estimate the percentage increase of the ultimate bearing capacity as a function of the footing shape and the roughness of the footing base interface.