• 한국작물학회지
• /
• 제33권4호
• /
• pp.343-349
• /
• 1988

보리 극조숙 품종을 육성하기 위하여 육종재료들에 대한 감온성 및 저온생육성을 검정하였다. 국내외 품종 및 계통을 공시하여 파종을 소거한 후 온실의 고온, 저온조건 및 포장에서 시험을 실시한 결과는 다음과 같다. 1. 온도처리에 따른 초장의 온도계수(Q$_{10}$), 생육비율, 감온성정도는 품종간 변이가 컸다. 조숙성 품종은 Q$_{10}$ 치가 커서 온도변화에 둔감한 생육반응을 보였다. 2. 온도변화에 대한 지엽전개기의 온도계수(Q$_{10}$), 감온성정도 역시 품종간 변이가 컸으나 감온성정도의 변이계수가 더 크므로 품종간 차이를 조사하기 위해선 이 형질의 이용이 더 효과적으로 보여진다. 3. 지엽전개기에 대한 Q$_{10}$ 및 감온성정도는 초장에 대한 Q$_{10}$, 감온성정도와 상관이 인정되지 않았다. 4. 출수에서 개화까지의 기간은 고온에서 2~4일로 짧았으나 저온구에서 는 1~11일로 그 변이가 매우 크게 나타났다. 5. 고온에서의 출수기와 저온에서의 출수기, 포장출수기, 성숙기와는 정의 상관을 나타냈고 저온에서의 개화기는 고온에서 출수기, 포장출수기, 성숙기와는 상관을 나타냈다. 6. 대체로 저온과 고온구간에 출수기의 차이가 큰 품종은 수원218호. SB76588, 5월보리. 조강보리 등으로 감온성이 민감하고 조숙성 품종군에 속하였다.품종군에 속하였다.

• 한국축산식품학회지
• /
• 제39권6호
• /
• pp.1008-1014
• /
• 2019

This study investigated the effects of pressure-mediated protein changes on the ice nucleation temperature of pork loins. To variate chemical state of meat proteins, pork loin was pressurized at varying pressure levels (100-500 MPa) for 3 min, and moisture content, expressible moisture (EM) and differential scanning calorimetry (DSC) were analyzed. Although, all treatments showed similar moisture content, EM and degree of protein unfolding of pork loin showed different features as of 300 MPa. At moderate pressure treatments (100-200 MPa), all protein fractions were detected in DSC experiments, and pork loin had lower EM than control (p<0.05). Meanwhile, myosin and actin of pork loin treated at greater than 300 MPa were completely unfolded, and the treatments showed high EM compared to control (p<0.05). Unfolding of meat proteins was a factor suppressing ice nucleation, and the ice nucleation temperature tended to decrease with increasing applied pressure level. The ice nucleation characteristics of pressurized pork loin exhibited a potential application in freezing storage of pressurized meat with less tissue damage comparing to freeze fresh meat, and further exploration regarding the quality change after freezing of fresh and pressurized meat was warranted.

• 정보보호학회논문지
• /
• 제24권4호
• /
• pp.593-605
• /
• 2014

본 논문에서는 하드웨어로 경량 암호 HIGHT, PRESENT, PRINTcipher를 설계하고 소프트웨어로 암호 운영모드를 구현하여 대칭키 암호에 대한 효율적인 하드웨어/소프트웨어 통합설계 방법을 제안하였다. 우선 효과적인 통합설계 언어인 GEZEL 기반으로 대칭키 암호를 하드웨어로 구현한 후 FSMD 방식의 각 암호 모듈을 unfolding, retiming 등 하드웨어 최적화 이론을 적용하여 성능을 향상시켰다. 또한, 8051 마이크로프로세서에 대칭키 암호 운영모드를 C언어로 구현하여 서로 다른 운영모드를 지원하는 다양한 플랫폼에 적용할 수 있게 하였다. 이때 하드웨어/소프트웨어간의 신뢰성 있는 통신 확립과 통신 간 발생할 수 있는 시간 지연을 막기 위하여 하드웨어의 통신 코어와 암호코어를 분리하여 병렬적으로 수행되어 암호화 연산 수행 중에도 메시지를 송/수신 할 수 있도록 처리하는 개선된 handshake 프로토콜을 사용하여 전체적인 성능을 향상시켰다.

• Journal of Radiation Protection and Research
• /
• 제42권1호
• /
• pp.16-20
• /
• 2017

Background: The design of deuteron accelerator neutron source facilities requires reliable yield estimation of gamma-rays as well as neutrons from deuteron-induced reactions. We have so foar measured systematically double-differential thick target neutron yields (DDTTNYs) for carbon, aluminum, titanium, copper, niobium, and SUS304 targets. In the neutron data analysis, the events of gamma-rays taken simultaneously were treated as backgrounds. In the present work, we have re-analyzed the experimental data for a thick carbon target with particular attention to gamma-ray events. Materials and Methods: Double-differential thick target gamma-ray yields from carbon irradiated by 5 and 9 MeV deuterons were measured using an NE213 liquid organic scintillator at the Kyushu University Tandem accelerator Laboratory. The gamma-ray energy spectra were obtained by an unfolding method using FORIST code. The response functions of the NE213 detector were calculated by EGS5 incorporated in PHITS code. Results and Discussion: The measured gamma-ray spectra show some pronounced peaks corresponding to gamma-ray transitions between discrete levels in residual nuclei, and the measured angular distributions are almost isotropic for both the incident energies. Conclusion: PHITS calculations using INCL, GEM, and EBITEM models reproduce the spectral shapes and the angular distributions generally well, although they underestimate the absolute gamma-ray yields by about 20%.

• 한국자동차공학회논문집
• /
• 제17권2호
• /
• pp.187-192
• /
• 2009

A snap ring is a kind of metal spring with open ends which can be installed into a groove to prevent lateral movement. In this study a nonlinear finite element analysis model is developed to simulate the fastening process of a snap ring connecting the constant velocity joint and the transmission. Insert load, disengage load and breakage are three important issues. They are analyzed using the developed model. The load histories of simulations are similar to those of tests and the differences of maximum load are around 10%. Bending of the entire ring and unfolding of the end section are major contributors of the fastening load. The load variations caused by the angular position of spline tooth are about 50%. Breakage is highly sensitive to the position of a snap ring.

• 한국공간구조학회논문집
• /
• 제14권1호
• /
• pp.93-99
• /
• 2014

Deployable structure is a system on which the study is being actively performed in various fields including architecture field. However, There is little study which can enhance the practicality since the interpretation condition is difficult as the unstable structure in the architecture field. In this study, the Scissors system has been focused on among the Deployable structure. The structure was developed using the Scissors system and the Mock-up test was performed. Through this, the unfolding method was proposed and the practicability was surveyed through the specific design of the Test model. Also, the structure stability was reviewed through structure analysis of Mock-up test model. and stabilizing method was proposed.

• 대한인간공학회지
• /
• 제24권2호
• /
• pp.85-91
• /
• 2005

To understand the basic relationship between 3D curved surface model and 2D pattern, simplified torso model was generated by commercial CAD program (IDEAS). 3D torso model was then divided into different blocks and unfolded into a flat pattern as in ordinary works of clothing item design. As results, 2D pattern development of different part of 3D torso model was attempted and analyzed mathematically. It was found that different height, radius and tangent slope of 3D blocks resulted in different 2D pattern. The relationships between the shape parameters of 3D torso blocks and those of 2D patterns were analyzed using regression equations. Direct way of drawing a 2D pattern of corresponding 3D torso block was also illustrated for the convenience of pattern making using conventional measurements of upper/ lower radii and height of 3D torso block.

• 통상정보연구
• /
• 제11권4호
• /
• pp.313-344
• /
• 2009

Corporate Social Responsibility(CSR) is considered recently a key factor for the firm's success and sustainable growth in today's changing business environments. Discussions on CSR are extensively unfolding in various sectors, public, civil society and business organizations, across the world. Consumer in foreign markets have been insisted that multinational corporations and foreign supplier need to adapt their business activities to not only the economic, but also social needs of the consumer. Therefore Korean companies operating in global markets need their global CSR strategy, which will contribute to the improvement of their international competitiveness and long term growth. Thus, the purpose of this study is to report on the strategy of corporate social responsibility through the literature review and illustration of CSR activities of the leading companies in global market. In addition, this paper is aimed to provide Korean firms the insight in reinforcement of global competitiveness in relation of strategic CSR.

• Architectural research
• /
• 제12권2호
• /
• pp.41-52
• /
• 2010

The aim of this paper is to evaluate the methodological strategies for the architectural design field of study mainly focused on qualitative and quantitative research designs. Firstly, this paper addresses the characteristics of the six approaches including their methodological aspects in general. Each strategy is assessed by the different approaches to give full insights in it. Secondly, it distinguishes the differences among six research approaches especially derived from qualitative and quantitative research designs. The differences are discussed in terms of the strengths and weaknesses of each strategy. Finally, this paper attempts to discuss about possible applications for introducing approaches to the research topic with which the exemplified research topic, a design evaluation system, deals. To investigate the applicability of the design methods employed, the following topic has been stated; how to develop a design evaluation system and what to be considered for unfolding the thrown topic in terms of strategic approaches in the field of architectural design researches reviewed through the study.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2006년도 추계 종합학술대회 논문집
• /
• pp.213-217
• /
• 2006

네칸만화는 기승전결 구조를 가지고 이야기를 전개한다. 기승전결 구조는 연역적, 비연역적 전개를 통해 이야기를 풀어 가는데, 작품에서 서사구조는 이야기를 보다 효과적이고 재미있게 전달하기 위해 다양한 변화를 꾀하고 있다. 이에 연구에서는 네칸만화의 연역적, 비연역적 전개를 주로 다룬다. 국내외 유명 네칸만화의 서사구조의 분석을 통해 네칸만화가 가진 이야기 구조를 밝히고, 유머만화와 풍자만화에 사용되는 서사구조의 분석을 통해 비교하는데 목적이 있다.