• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.24 no.2
• /
• pp.55-64
• /
• 1988

Stow nets have widely been used in the western sea of Korea from the olden age. The original structure of a stow net is a large square-sectional bag net made of 4 netting panels, and the front fringes of top and bottom panels are connected to the top and bottom beams respectively. Wire ropes, which is originated from the holding anchor are gradually forked and biforked, and finally 4 pieces of wire rope (biforked pendants) are jointed to each beam. Much convenience caused by long and heavy beams were problemed, then some studies have been carried out to improve the net since 1930's. The most effective improvement were achieved in 1980 by Mr. Han and his colleagues. The key point of improvement was that the beams were removed and the belt shaped shearing device made by canvas was attached to the side panels, the head rope and ground rope to the front fringe of top and bottom panel, and biforked pendants are joined to the shearing device. Even though this is the epoch-making improvement of a stow net, the further study should be required to find out more effective method. The authors carried out a model experiment on the stow net to determine the vertical and horizontal opening of a net mouth, and also examine the front, top and side-view configuration of the net. The model net was constructed depending on the Similarity Law of Fishing Gear in 1/10 and 1/20 scale and set against to the current at shallow and speedy flowing channel. The vertical and horizontal openings were determined by using scaled bamboo poles, and the configuration was observed by using specially prepared observation platform and underwater observation glass, and also photographed by using specially prepared underwater photographic equipment. The results obtained can be summarized as follows: 1. The opening height and width of the shearing device varied in accordance with the relative length of the biforked pendants. Considering the height and width of shearing device in 6 cases of the arrangement system of biforked pendants, the best result was obtained in the case that the 2nd, 3rd and 4th pendents from the bottom-most was 5%, 9% and 4% longer than that. 2. On the top-view configuration the excessive deformation of head rope and ground rope were observed. In the actual net, 54m long head rope and ground rope were attached to the front fringe of top and bottom panels so that the head rope may be lifted to make the net mouth open highly. But actually the head rope and the ground rope are streamed backward without any lift, and also the netting followed the ropes were deformed until the 2/5 in the whole length of the net. This deformation may be guessed to disturb the entrance of fish school into the net and also caused the net to get caught by obstacles in the sea bed and to be broken largely. 3. Hydrodynamic resistance R of the actual net may be deduced as R(kg)=29.2$\times$103 v1.65. It is also expressed as R(kg)=5.9$\times$d/l$\times$ab v1.65. depending on the formula deduced by Koyama to estimate the resistance of trawl nets, where d/l denote the ratio between diameter of netting twine and length of mesh leg in every part of side panel, a and b, the stretched circumference of the mouth and the stretched length of the net, respectively.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.2
• /
• pp.156-163
• /
• 2002

In order to development the construction and dimension of fishing gear for gizzard shad coastal purse seine, first of all investigated to the sinking speed and underwater geometry of net, behaviour of fish school to the net during the fishing operation In the field. The results obtained are summarized as follows; 1. Average sinking speed of net was 13cm/sec in bunt, 9.0cm/sec and 9.5cm/sec in 170m and 280m of center, 4.9cm/sec in end wing side, therefore was fastest in start of shooting and decreased gradually during the shooting process. 2. The most of leadline was reached in bottom from the shooting immediately to hauling time and the mean depth of timber bar used equipment for the escaping prevention of fish school was within the 2.7m. 3. The fish school of gizzard shad was appearanced higher density and remained to the most time in bottom than the surface and repeated to vortical movement, and its tendency to distinct in rapid time of tide current. 4. Behaviour of fish school in the net was showed to the vortical movement by sinking and rising immediately with the shooting of net and then divide with the two shape to follow round the wall of net and no patterns straightly movement in the net, and tendency easily catched in fish school of the wall of net. 5. Escaping of fish school in the gap of wing side was to busy after that seting the timber bar, therefore its function for escaping prevention of fish school was very lowed. 6. Escaping behaviour of fish school was differenced with the depth of fishing ground, the above 20m escaped to busy through the below in ledline because the sinking speed of fish school is fast than the net.

• Economic and Environmental Geology
• /
• v.54 no.6
• /
• pp.717-731
• /
• 2021

We analyzed the characteristics of the habitat environment for the Seonam study area in Ulsan, the southern shore of the East Sea using bathymetry and seafloor environment data. The depth of the study area ranges from about 0 m to 23 m. In the west of the study area, the water depth is shallow with a gentle slope, and the water depth becomes deeper with a steep slope in the east. Due to the right-lateral strike-slip faults located in the continental margin of the East Sea, the fracture surfaces of the seabed rocks are mainly in the N-S direction, which is similar to the direction of the strike faults. Three seafloor types (conglomeratic-grained sandy, coasre-graiend sandy, fine-grained sandy) and rocky bottom area have been classified according to the analyses of the bathymerty, seafloor image, and surface sediment data. The rocky bottom areas are mainly distributed around Seaoam and in the northern and southern coastal area. But the intermediate zone between Seonam and coastal area has no rocky bottom. This intermediate area is expected to have active sedimentation as seawater way. The sandy sediments are widely distributed throughout the study area. Underwater images and UAV images show that Cnidarians, Brachiopods, Mollusks are mostly dominant in the shallow habitat and various Nacellidae, Mytilidae live on the intertidal zone around Seonam. Annelida and Arthropod are dominant in the sandy sediments. The distribution of marine organism in the study area might be greatly influenced by the seafloor type, the composition and particle size distribution of the seafloor sediments. The analysis of habitat environment mapping with bathymetry, seafloor data and underwater images is supposed to contribute to the study of the structure and function of marine ecosystem.

• Journal of the Korea Concrete Institute
• /
• v.23 no.5
• /
• pp.609-615
• /
• 2011

MgO concrete containing lightly burnt MgO powder at $850{\sim}1,000^{\circ}C$ may have a long-term expansibility characteristic. Such expansibility of MgO concrete can compensate the shrinkage at later ages since the hydration of the MgO is very slow. However, the addition of MgO delays the initial hydration of cement and increases the setting time of cement. Also, the porosity and pore-size distribution of the MgO concrete are different from OPC concrete. Therefore, in order to use MgO in practice, both mechanical and durability properties of MgO concrete should be carefully examined. In this study, durability tests on carbonation, freezing-thawing, and diffusion of chloride were carried out after 56 days of underwater curing at $20^{\circ}C$ to compare durability characteristics of 5% MgO-mixed concrete with those of OPC concrete. The results showed that MgO concrete shows a greater durability than the concrete with no MgO, because the micro structure in the MgO concrete is much denser due to its expansibility characteristic.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.1
• /
• pp.9-16
• /
• 2011

When a hydrofoil ship plies at high speed, there exist possibilities of collision with ocean mammals dwelling near the surface. An active sonar located within the immersed hydrofoil structure that provides the lift for the vessel, can be used for early warning of their presence. The proper functioning of the active sonar system depends on its ability to reject noise and pick up the target signal. In this article, we measured the noise on a hydrofoil of an operating ship with two flush-mounted hydrophones. The measurements were conducted for the purpose of (1) identifying the effect of operating state of machinery likes engine, cooler and generator (2) observing the change of noise depending on the measuring position (3) observing the change of noise with increasing ship speed. To verify our experiment, experiments were performed three times and the measured results are compared with other investigations and they show similarity to each other. The results are analyzed with frequency domain in order to apply to operating active sonar detecting system and focus on high frequency band within sonar's operating frequency region. Through these experiments and analysis, it is expected that we can identify the generated noise around hydrofoil where active sonar is installed and these results lead us to design active sonar that could distinguish target signal from noise more effectively.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.4
• /
• pp.437-445
• /
• 2019

After the permanent shutdown of K1 in 2017, decommissioning processes have attracted great attention. According to the current decommissioning roadmap, the dismantling of the activated components of K1 may start in 2026, following the removal of its spent fuel. Since the reactor vessel (RV) and reactor vessel internal (RVI) of K1 contain massive components and are relatively highly activated, their decommissioning process should be conducted carefully in terms of radiological and industrial safety. For achieving maximum efficiency of nuclear waste management processes for K1, we present activation analysis of the segmentation process and waste classification of the RV and RVI components of K1. For RVI, the active fuel regions and some parts of the upper and lower active regions are classified as intermediate-level waste (ILW), while other components are classified as low-level waste (LLW). Due to the RVI's complex structure and high activation, we suggest various underwater segmentation techniques which are expected to reduce radiation exposure and generate approximately nine ILW and nineteen very low level waste (VLLW)/LLW packages. For RV, the active fuel region and other components are classified as LLW, VLLW, and clearance waste (CW). In this case, we suggest in-situ remote segmentation in air, which is expected to generate approximately forty-two VLLW/LLW packages.

• Strategy21
• /
• s.41
• /
• pp.232-260
• /
• 2017

The purpose of this paper is to open a debate about what kind of deterrent strategy the ROK military should pursue in the era of NK's weapons of mass destruction and missile threats. I argue that the ROK military needs a comprehensive deterrent strategy that reflects the international security situations and trends and that builds on clear understanding of the basic concepts and how deterrence operates. The paper starts with surveying the basic knowledge of deterrence from the perspectives of both theory and practice. Then, it provides explanations on why deterrence against NK can be particularly difficult given the security environment in and around the Korean peninsula. For example, South Korea and North Korea hardly share 'common knowledge' that serves as a basic element for the operation of deterrence. Deterrence against North Korea involves complex situations in that both deterrence and compellence strategies may be relevant particularly to North Korea's WMD and missile threats. It also involves both immediate and general deterrence. Based on the discussion, I suggest several ideas that may serve as guidelines for establishing a deterrent strategy against NK. First, our threats for deterrence should be the ones that can be realized, particularly in terms of the international norms. In other words, they must be considered appropriate among other nations in the international community. Second, there should be separate plans for the different kinds of threats: one is conventional, local provocations and the other is WMD/missile related provocations. Third, we should pursue much closer cooperative relations with the U.S. military to enhance the effectiveness of immediate deterrence in the Korean peninsula. Fourth, the ROK military should aim to accomplish 'smart deterrence' maximizing the benefits of technological superiority. Fifth, the ROK military readiness and structure should be able to deny emerging North Korean military threats such as the submarine-launched ballistic missiles and intercontinental ballistic missiles. Lastly, in executing threats, we should consider that the current action influences credibility and reputation of the ROK, which in turn affect the decisions for future provocations. North Korea's WMD/missile threats may soon become critical strategic-level threats to South Korea. In retrospect, the first debate on building a missile defense system in South Korea dates back to the 1980s. Mostly the debate has centered on whether or not South Korea's system should be integrated into the U.S. missile defense system. In the meantime, North Korea has become a small nuclear power that can threaten the United States with the ballistic missiles capability. If North Korea completes the SLBM program and loads the missiles on a submarine with improved underwater operation capability, then, South Korea may have to face the reality of power politics demonstrated by Thucydides through the Athenians: "The strong do what they have the power to do, the weak accept what they have to accept."

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.6
• /
• pp.317-324
• /
• 2005

Detection and localization of a quiet target in shallow water environments is a challenging problem because of the complicated acoustic Propagation and the Prevalence of loud surface ship interference. Matched Field Processing (MFP) can help address the concern by using a Propagation model to determine the steering vectors, thus Providing optimal away gain and localization accuracy. However, Performance of MFP have yet realized in practice, for several reasons. The most important limitation is that precise information on the underwater environments is generally not available. To examine the Performance of MFP in the East Sea of Korea, we have accomplished a series of matched acoustic Properties and localization experiment (MAPLE). We analyzed the array data measured from MAPLE which is accomplished using a vertical line array and a towed acoustic source off the east cost of Korea in Oct. 2003. We localized the acoustic source using MFP. It is well known that the temperature structure in the experimental site is affected by the short period fluctuation such as internal wave. In this paper, it is found that the sidelobe level on the MFP ambiguity surface is increased being affected by the short period fluctuation.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.12
• /
• pp.75-84
• /
• 2019

The Naval Combat System has several equipment needed to operate the system, such as radar equipment, underwater sensor equipment, guns and missile control and armed control equipment, and a multi function console is configured to control it. The multi function console is equipped with HCI(Human Computer Interaction)-based software for displaying the status information of equipment and controlling equipment, and the operator uses the installed software to operate the Naval Combat System. However, when operating a Naval Combat System for a long time, there are problems such as physical discomfort caused by the structure of the multi function console display and increase in fatigue of the person who operates various and complicated user interface configuration. These issues are important factors in reducing Naval Combat System operability. In order to solve these issues, in this paper, based on a questionnaire survey conducted for Naval Combat System development personnel, multi function console screen design to reduce physical discomfort and HCI design to reduce fatigue and increase intuition are proposed. The proposed design is expected to provide convenience to future Naval Combat System operators and improve operation over existing Naval Combat System.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.4
• /
• pp.230-237
• /
• 2005

The angle-tracking of maneuvering targets is required to the state estimation and classification of targets in underwater acoustic systems. The Problem of angle-tracking multiple closed and crossing targets has been studied by various authors. Sword et al. Proposed a multiple target an91e-tracking algorithm using angular innovations of the targets during a sampling Period are estimated in the least square sense using the most recent estimate of the sensor output covariance matrix. This algorithm has attractive features of simple structure and avoidance of data association problem. Ryu et al. recently Proposed an effective multiple target angle-tracking algorithm which can obtain the angular innovations of the targets from a signal subspace instead of the sensor output covariance matrix. Hwang et al. improved the computational performance of a multiple target angle-tracking algorithm based on the fact that the steering vector and the noise subspace are orthogonal. These algorithms. however. are ineffective when a subset of the incident sources are coherent. In this Paper, we proposed a new multiple target angle-tracking algorithm for coherent and incoherent sources. The proposed algorithm uses the relationship between source steering vectors and the signal eigenvectors which are multiplied noise covariance matrix. The computer simulation results demonstrate the improved Performance of the Proposed algorithm.