• Journal of information and communication convergence engineering
• /
• 제19권1호
• /
• pp.61-66
• /
• 2021

An underwater remotely operated vehicle (ROV) has been implemented. It can inspect foreign substances through a CCD camera while the ROV is running in water. The maximum thrust of the ROV's running thruster is 139.3 N, allowing the ROV to move forward and backward at a running speed of 1.03 m/s underwater. The structural strength of the guard frame was analyzed when the ROV collided with a wall while traveling at a speed of 1.03 m/s underwater, and found to be safe. The maximum running speed of the ROV is 1.08 m/s and the working speed is 0.2 m/s in a 5.8-m deep-water wave pool, which satisfies the target performance. As the ROV traveled underwater at a speed of 0.2 m/s, the inspection camera was able to read characters that were 3 mm in width at a depth of 1.5 m, which meant it could sufficiently identify foreign objects in the water.

• 한국정보통신학회논문지
• /
• 제26권11호
• /
• pp.1697-1705
• /
• 2022

대규모 해양 건설에 따른 해양 건설 작업자의 안전 및 해양 오염 문제가 발생하고 있다. 특히, 해양의 수중 건설 작업은 다른 작업에 비해 위험도가 높아 작업자의 안전을 고려한 무인 대체 시스템의 적용이 필요하다. 본 논문에서는 수중 무인 작업을 위해 해양 건설용 ROV 시스템을 개발 완료하였다. 수중 추진체의 제어를 통한 위치제어, 공압 gripper 그리고 수중 작업 모니터링을 위한 모니터링 시스템을 개발하였다. 성능평가 결과 ROV의 수중 이동속도는 최대 0.89m/s로 평가되었으며, 공압 gripper의 최대 하중은 80kg의 하중 허용 가능함을 확인하였다. 또한, 수중 ROV의 제어와 수중 영상 스트리밍에 필요한 네트워크 대역폭이 300Mbps 이상으로 평가되었으며, 유선 통신은 205m에서 92.7 ~ 95.0Mbit/s, 무선 통신은 78.3 ~ 84.8Mbit/s의 속도로 평가되었다.

• Journal of Positioning, Navigation, and Timing
• /
• 제12권1호
• /
• pp.67-73
• /
• 2023

As interest in underwater structures and ocean exploration increases, many researchers are proposing methods for modeling and controlling various remotely operated vehicles (ROVs). Recently, hybrid systems composed of an autonomous underwater vehicle and an ROV capable of remote control and autonomous navigation are being developed. In this study we introduce a method that models Ariari-aROV, an ROV consisting of five thrusters, and performs navigation. The proposed ROV can be controlled manually and by autonomous navigation when given a target point. An extended Kalman filter is utilized for sensor measurement correction for more precise navigation. The proposed method is verified through a simulation.

• 한국산업융합학회 논문집
• /
• 제21권6호
• /
• pp.389-394
• /
• 2018

Remotely operated vehicle(ROV) and autonomous underwater vehicle(AUV) have been used for underwater surveys, underwater exploration, resource harvesting, offshore plant maintenance and repair, and underwater construction. It is hard for people to work in the deep sea. Therefore, we need a vision control system of underwater submersible that can replace human eyes. However, many people have difficulty in developing a deep-sea image control system due to the deep sea special environment such as high pressure, brine, waterproofing and communication. In this paper, we will develop an Ethernet based remote image control system that can control the image mounted on ROV.

• 대한임베디드공학회논문지
• /
• 제16권4호
• /
• pp.129-136
• /
• 2021

River facilities and port structures require a regular inspection and diagnosis due to obsolescence. Currently, most river facilities are undergoing indirect inspection and diagnosis by divers. The underwater inspections are not feasible due to safety issues of divers and restrictions on working hours and environment. To overcome these issues, it is intended to conduct inspections of river facilities using underwater drones. In this research, an underwater ROV (Remote Operated Vehicle) has been developed, which is a kind of drone with propellers. As a key device of this research, an injection device has been attached to the underwater drone to conduct an operation test, a stable operation test of an underwater drone, and a test of attached sensors. The river facility inspection can be carried out optimally using the hovering control of the drone and injection systems. With the developed ROV system, hovering test and injection test have been performed to verify the feasibility of this development.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권8호
• /
• pp.1196-1202
• /
• 2009

본 논문에서는 ROV 제어 시스템 구축을 위하여 관측기를 이용한 수중환경 추정기 설계를 다룬다. 먼저, 수중환경변화는 ROV 시스템의 입력항목에 가해지는 외부외란으로서 다루어질 수 있으며, 이러한 수중환경변화를 추정하기 위하여 외부외란에 영향을 받지 않는 PI 관측기를 제안한다. 이후 본 논문에서는 계단형 및 정현파형 수중환경변화를 가정하여 제안한 방법에 대해 시뮬레이션을 행하였으며, 그 결과 유효성을 확인하였다. 향후, 본 제안법을 ROV 시스템에 대한 햅틱제어기 설계에 이용하고자 한다.

• 한국산업융합학회 논문집
• /
• 제23권3호
• /
• pp.463-471
• /
• 2020

Recently, various tries to apply ROV (Remotely Operated Vehicle) into underwater are being developed. However, due to underwater environment uniqueness, the additional problem must be taken into account when designing an ROV for the inspection of the underwater structure. This is because a GPS-based information method cannot be applied, and the obtainable image is also dependent on the turbidity. Also, it is necessary to be able to satisfy waterproof and operating speeds in consideration of most practical application environments. This paper describes the design results of the ROV system for underwater structure inspection considering the above problems. The designed system applied INS / DVL for location recognition and was configured to support 3D mapping and stereo camera-based image information using sonar depending on visibility. To satisfy the waterproof, a pressure vessel using a composite material was applied. And over-actuated system using eight thrusters to maintain a stable posture and operating speed was applied also. The designed system was verified by structural analysis and flow analysis also.

• 제어로봇시스템학회논문지
• /
• 제17권5호
• /
• pp.460-470
• /
• 2011

This paper presents a dynamic workspace control method of underwater manipulator considering a floating ROV (Remotely Operated vehicle) motion caused by sea wave. This method is necessary for the underwater work required linear motion control of a manipulator's end-effector mounted on a floating ROV in undersea. In the proposed method, the motion of ROV is modeled as nonlinear first-order differential equation excluded dynamic elements. For online manipulator control achievement, we develop the position tracking method based on sensor data and EKF (Extended Kalman Filter) and the input velocity compensation method. The dynamic workspace control method is established by applying these methods to differential inverse kinematics solution. For verification of the proposed method, experimental data based test of ROV position tracking and simulation of the proposed control method are performed, which is based on the specification of the KORDI deep-sea ROV Hemire.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.198-203
• /
• 2004

Ocean developments gradually move to deep-sea in the 21 century. A deep-sea unmanned underwater vehicle is one of important tools for ocean resource survey. A marine cable plays an important role for the safe operation and signal transmission of a deep-sea unmanned underwater vehicle. The first cable of a deep-sea unmanned underwater vehicle is excited by surface vessel motion and shows non-linear dynamic behaviors. A ROV launcher is also excited by the 1st cable motion. A numerical method is necessary for analysing the dynamic behaviour of the first marine cable and the ROV launcher. In this study, a numerival program is appled to a 6,000m long cable for a deep-sea unmanned underwater vehicle to shaw shows the dynamic behaviour of the cable and the ROV launcher under combined excitations.

• 한국해양공학회지
• /
• 제8권1호
• /
• pp.50-61
• /
• 1994

A 300 meter class ROV(CROV300) is composed of three parts : a surface unit, a tether cable and an underwater vehicle. The vehicle controller is based on two processors : an Intel 8097-16-bit one chip micro-processor and a Texas Instruments TMS320E25 digital signal processor. In this paper, the surface controller, the vehicle controller and peripheral devices interfaced with the processors are described. These controllers transmit/receive measured status data and control commands through RS422 serial communication. Depth, heading, trimming, camera tilting, and leakage signals are acquired through the embedded AD converters of the 8097. On the other hand, altitude of ROV and lbstacle avoidance signals are processed by the DSP processor and periodically fetched by the 8097. The processor is interfaced with a 4-channel 12-bit D/A converter to generate control signals for DC motors an dseveral transistors to handle the relays for on/off switching of external devices.