• 제목/요약/키워드: Underground parts

검색결과 197건 처리시간 0.023초

지하 철도역사에서 위치확인을 위한 스마트 점자블럭의 RF 특성 분석 (RF Characteristics Analysis of Smart Braille Block for Location Identification in Subway Station)

  • 황종규;김경희;안태기
    • 전기전자학회논문지
    • /
    • 제24권2호
    • /
    • pp.378-384
    • /
    • 2020
  • 철도역사는 최근 들어 환승 등으로 더욱 복잡해지면서 철도역사 내부에서 이동자는 본인의 가고자 하는 목적지를 찾는데 어려움을 호소하고 있으며, 특히 교통약자들의 경우는 더욱 많은 어려움을 호소하고 있다. 특히 교통약자들은 철도역사 바닥에 설치된 점자 블록을 기반으로 역사 내에서 위치를 찾고 있으나 현실적으로는 어려움이 많아 역사이용 만족도가 매우 낮게 나오고 있다. 이에 따라 본 논문에서는 철도역사에서의 다양한 스마트모빌리티 서비스 지원을 위해서는 역사 이용자의 실시간 위치확인을 위한 스마트 점자 블록을 제안하고, 이 스마트 점자 블록의 재질별 RF 특성해석을 통해 철도역사 적합한 스마트 점자 블록의 재질, 그리고 스마트 점자 블록 내부의 RF 센서 간 이격거리 가이드라인을 제시하고자 한다. 특성해석을 통해 분석한 결과 결국 스마트 점자 블록의 적용 시 소재 변화에 공사 현장에 맞는 소재를 선정한 뒤 적용 예정인 RF 시스템 특히 RF 성능을 크게 좌우하는 안테나에 대한 성능변화를 반드시 사전 검토 과정을 통해 확인한 후 적용해야 할 것으로 보인다.

아세틸렌블랙 함량에 따른 반도전 재료의 체적저항과 열전도 특성 (Volume Resistivity and Thermal conductivity of Semiconducting Materials by Acetylene Black)

  • 양종석;이경용;최용성;박대희
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
    • /
    • pp.134-135
    • /
    • 2005
  • To improve mean-life and reliability of power cable, we have investigated volume resistivity and thermal conductivity showed by changing the content of acetylene black which is the component parts of semiconductive shield in underground power transmission cable. The sheets were primarily kneaded in their pellet form material samples for 5 minutes on rollers ranging between 70[$^{\circ}C$] and 100[$^{\circ}C$]. Then they were produced as sheets after pressing for 20 minutes at 180[$^{\circ}C$] with a pressure of 200[kg/cm]. The content of conductive acetylene black was the variable, and their contents were 20, 30 and 40[wt%], respectively. Volume resistivity of specimens was measured by volume resistivity meter after 10 minutes in the preheated oven of both $25\pm1[^{\circ}C]$ and $90\pm1[^{\circ}C]$. Thermal conductivity was measured by Nano Flash Diffusivity. The measurement temperatures of thermal conductivity using Nano Flash Diffusivity were both 25[$^{\circ}C$] and 55[$^{\circ}C$]. From these experimental results, volume resistivity was high according to an increase of the content of acetylene black. And thermal conductivity was increased to an increase of the content of acetylene black. And thermal conductivity were increased by heating rate because volume of materials was expanded according to rise in temperature.

  • PDF

쥐똥나무를 이용한 생물공학적 비탈면 녹화공법의 사례연구 (A Case Study on the Slope Revegetation Technology of Biological Engineering Using the Ligustrum obtusifolium)

  • 김혜주;강효석
    • 한국환경복원기술학회지
    • /
    • 제2권3호
    • /
    • pp.47-53
    • /
    • 1999
  • This study was carried out to suggest the slope revegetation technology of biological engineering using the Ligustrum obtusifolium, which is one of the pioneer plant species. Ahead of the experimental construction, we evaluated the L. obtusifolium's value of biological engineering for the slope stabilization by testing the growth rate after the cuttings were buried for 8 weeks('98. 7. ~ '98. 9.). In this test, it was found that the L. obtusifolium, one of the species deep rooted with developed underground parts, is very effective for the slope stabilization and that the rooting powder(Hormex Powder) gave the better effects on root germination. In April of 1999, the experimental construction of biological engineering technology using recycled L. obtusifolium live cuttings(applied growth-stimulating compound) and green bags was conducted at sandy cut-slope in GLEN ROSS G.C.(Yongin). The slope was tolerant of soil erosion despite of heavy rainfall in the rainy season and many plant species invading for five months('99. 4. ~ '99. 9.). The vegetation research was performed through examining the frequency of each block using the transect method. 21 kinds of plant speices appeared in total area($25.5m^2$) and the dominant species are Digitaria sanguinalis, Setaria viridis, Cyperus amuricus, Persicaria blumei, Artemisia princeps var. orientalis. With regard to life forms, therophytes were shown with a dominant distribution of 66.7% of total species and neophytes relatively with a low distribution of 19.0%. Furthermore, it can be estimated that there is no ecological stabilization of this slope with the result of the ruderal species' occupation of 71.4%. It is too early to argue about ecological mechanical advantages and disadvantages of this technology, but, from the result of this study, it is expected that the slope revegetation technology of biological engineering using L. obtusifolium can be effectively applied to sandy slope(not rock or weathered rock slope) and that the early rapid stabilization and favorable succession could be done with the improvement of soil condition.

  • PDF

부식 강재 복공판의 재사용성 평가에 관한 기초적 연구 (A Preliminary Study on the Reused Channel-Type Lining Board with Corrosion-Damage)

  • 김인태;김동우;최형석;정진환
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제13권4호통권56호
    • /
    • pp.170-179
    • /
    • 2009
  • 복공판은 규격화된 강재를 조합하여 용접에 의해 일체화 시킨 것으로 주로 지하작업공간의 확보, 가설 차도 및 보도의 용도로 사용되며, 지하철, 지하상가 등의 건설을 위한 복개부와 가설교량의 상부구조 등에 적용된다. 이러한 복공판이 부식 손상된 경우에는 정량적인 잔존내하력 평가 없이 육안조사에 의한 판별 후 교체 또는 일정기간 사용 후 교체 등으로 그 기능을 유지하고 있다. 이에 본 연구에서는 부식된 복공판의 지속적 사용한계를 확인하고 경제적이고 효율적인 복공판 교체시기를 결정하기 위하여, 실제 지하철 현장에서 사용되고 있는 부식 손상된 복공판을 대상으로 각 구성 강재의 잔존두께를 측정하고, 휨 재하실험을 실시하였다. 그리고 수치해석을 수행하여 그 결과를 실험결과와 비교, 분석하였다. 그 결과 복공판 측, 하판의 두께 감소량과 잔존내하력과의 관계를 분석하여, 부식두께 감소량에 의한 복공판의 적절한 교체주기를 결정할 수 있는 지표를 제시하였다.

시비수준이 땅두릅의 생육과 수량에 미치는 영향 (Effects of Fertilization Level on Growth and Yield of Aralia cordata Thunb)

  • 김상국
    • 한국자원식물학회지
    • /
    • 제10권4호
    • /
    • pp.397-400
    • /
    • 1997
  • 두릅나무과에 속하는 다년생 숙근식물인 땅두릅(Aralia cordata Thunb.)의 양질 다수확 재배를 위한 적정 시비수준을 구명하기 위하여 실험을 수행하였던 바 얻어진 결과를 요약하면 다음과 같다. 1. 시비수준에 따른 지상부의 초장은 관행인 17-9-17kg보다 27-15-27kg에서 28.3cm로 생육이 우세하였으며 이러한 경향은 연화장의 결과와 마찬가지로 관행 시비수준이 7.0cm인 것보다 10.3cm로 양호한 결과를 보였다. 2. 지하부의 생육특성중 주근장은 관행시비에서 10.5cm로 처리간에 가장 높은 수치를 보였다. 3. 시비수준에 따른 년차별 건근중은 재배년수가 길어질수록 건근중의 증가를 보였으며 평균적으로 볼 때 관행시비인 17-0-17kg이 272kg인 것과 비교해 보면 27-15-27kg에서 310kg으로 약 14%정도 건근중의 증수효과를 보이는 것으로 나타났다. 4. 땅두릅의 연화재배를 통한 연화장의 엽수량은 관행시비구읜 17-9-17kg에서 391kgdlsrjt 보다 27-15-27kg 시비구에서 415kg으로 나타난 지상부의 건근 수량과 마찬가지로 가장 높은 수익성을 보이는 것으로 나타났다. 5. 이상의 결과를 종합해 볼 때 지상부의 엽수량과 지하부의 건근수량의 양질 다수확 재배를 위해서는 시비수준을 10a당 27-15-27kg으로 시용하는 것이 유리한 것으로 사료되었다.

  • PDF

보리 유식물에 처리한 수은의 분포 및 독성 연구 (Toxic Effects and Distribution of Mercury in Barley Seedlings)

  • 이춘환;장호식
    • 한국환경과학회지
    • /
    • 제1권1호
    • /
    • pp.13-21
    • /
    • 1992
  • The inhibitory effects of mercury ions on the growth of barley seedlings were studied and the distribution of metal elements in the organs of treated plants was investigated by using synchrotron radiation induced X-ray emission (SRIXE). Although the treatment of mercury ions caused growth inhibition, the mercury-specific increase in variable fluorescence and the abolishment of energy-dependent quenching in broken barley chloroplasts as shown by Moon et at. (1992) were not observed in the leaves of growth-inhibited seedlings. Instead the treatment of mercury decreased Fmax and Fo values. However, Fmax/Fo ratio and photochemical and nonphotochemical quenching coefficients were not affected significantly. By SRIXE analysis of $10\mu\textrm{m}$ mercury chloride treated seedlings, accumulation of mercury in roots was observed after 1 hour of treatment and similar concentration was sustained for 48 hours. Relative contents of mercury was high in roots and underground nodes where seeds were attachedl but was very low in leaves. Iron and zinc were also distributed mainly in the lower parts of the seedlings. However after 72 hours of treatment the contents of these metals in roots decreased and their distribution became more uniform, which may lead to death of the plants. These results suggest that the observed inhibitory effects on barley seedlings upto 48 hours after the treatment is not due to direct damages in the photosynthetic apparatus, but due to its accumulation in roots and the consequent retardation of the growth of barley seedlings. The decrease in Fmax and Fo is probably due to the decrease in chlorophyll and protein contents caused by the retardation of growth. The observed slow expansion of primary leaves could be also explained by the retardation of growth, but the fluorescence induction pattern from the leaves did not show characteristic symptoms of leaves under water stress.

  • PDF

전차선 절연구분장치 절연재의 이상마모 대책 (Countermeasures to Irregulor Abrasion of Section Insulators for Electric Railroad Catenary)

  • 최규형
    • 조명전기설비학회논문지
    • /
    • 제16권6호
    • /
    • pp.87-94
    • /
    • 2002
  • 전원위상이 다른 전차선 구간을 전기적으로 구분하기 위한 절연구분장치 중에서 특히, 지하구간에 설치된 교/직 절연구분장치는 강체가선 및 조가선 가선이 혼합된 특수한 가선구조로 되어 있어, 전동차 팬터그래프와 습동하는 절연재에 불규칙한 파상마모 현상이 발생한다. 본 논문에서는, 이와 같은 절연구분장치 절연재의 마모현상에 대하여, 현장 측정을 통하여 마모정도 및 마모형태를 조사하고, 전기철도 운행 및 유지보수에 미치는 영향을 분석하였다. 그리고. 절연재 이상마모에 영향을 미칠 수 있는 요인으로서, 절연구분장치의 설치높이 편차와 팬터그래프 압상력에 대응한 절연구분장치의 변위에 대한 실험적 분석을 수행하였고, 절연구분장치와 팬터그래프간에 작용하는 접촉력에 대한 이론적 분석을 통하여 그 발생원인을 규명하였다. 이와 같은 실험적, 이론적 분석을 토대로, 효과적인 절연구분장치 개량방법을 제시하였다.

화강풍화암 및 풍화토층 지역 깍기 비탈면의 안정성 검토 사례 연구 (A Case Study on the Stability Analysis of a Cutting Slope Composed of Weathered Granite and Soil)

  • 한공창;류동우;천대성;홍은수
    • 터널과지하공간
    • /
    • 제18권4호
    • /
    • pp.289-299
    • /
    • 2008
  • 화강풍화암 및 풍화토층 깍기 비탈면의 붕괴 원인 분석을 위해 수행한 안정성 검토 사례를 통해 화강암을 모암으로 하는 지역에 폭넓게 분포하는 화강풍화암 및 풍화토 깍기 비탈면 설계 시 유념해야 할 사항들을 살펴보았다. 지질 및 지반 조사를 통한 지반특성 파악하였으며 한계평형해석 및 수치해석을 통한 안전율 검토, 강우 및 파괴 이력 비교 분석 등 일련의과정을 비탈면 안정성 검토를 위해 수행하였다. 대상 지역 깍기 비탈면의 안정성 검토 결과로서 비탈면의 붕괴 원인은 주로 집중 강우 시 지반조건상 연약한 상부 지반에서의 전단강도 감소에 기인함을 알 수 있었다. 또한, 지하수 유입 경로와도 밀접한 관련이 있는 것으로 분석되었으며, 이를 기초로 비탈면의 안정화를 위한 대책공을 제시하였다.

The Ethnobotanical Knowledge on Sedge Plants in Korea (Cyperaceae)

  • Chung, Kyong-Sook;Kang, Shin-Ho
    • 한국자원식물학회:학술대회논문집
    • /
    • 한국자원식물학회 2019년도 추계학술대회
    • /
    • pp.20-20
    • /
    • 2019
  • Sedge family is second largest family in the Korean flora with more than 240 taxa, following Aster family (about 300 taxa). Although high species diversity, a very limited number of taxa has been utilized for ethnobotanical usages. In the study, previous researches on Cyperaceae ethnobotanical information are documented and analyzed for future research directions on the taxa. A total number of seven taxa has been used for medicinal, food, and material purposes: Carex boottiana Hook. & Arn., Cyperus amuricus Maxim., Cyperus esculentus L., Cyperus exaltatus Retz., Cyperus rotundus L., Eleocharis kuroguwai Ohwi, and Bolboschoenus maritimus (L.) Palla. Underground parts such as tubers are used with medicinal purpose, and aboveground portions such as leaves and stems provide materials for various tools and foods for people and animals. They are all native to Korea, except C. esculentus, which is introduced from Mediterranean areas for anti-erosion materials. The ethnobotanical value of C. esculentus has been well recognized from ancient times, for example, starch grains in USA (excavations at the Mashantucket Pequot Reservation) and Tiger nut milk (Horchata de chufa in Spain). Among material sources, C. exaltatus has a long history in the Korean peninsula from Three Kingdoms of Korea (57 BC~668 AD). C. rotundus is distributed widely in Asia, Africa, Europe, and America, and utilized for medicines, food, and materials. In addition, Eleocharis kuroguwai is only one taxon utilized for ethnobotanical uses among fifteen Eleocharis Korean native species. The number of species with ethnobotanical uses is small in sedge family, but the family has long been utilized accompanying long human history. Cyperus papyrus L., the source of papyrus paper (Egypt in the Nile Delta), is also a member of sedge family. Sedge family has contributed to human societies in various aspects but, the cultural, botanical, ecological values of family members have been underestimated.

  • PDF

TBM 굴진향상을 위한 연속굴착형 TBM 부품개조 및 제어기술 소개 (Continuous Excavation Type TBM Parts Modification and Control Technology for Improving TBM Performance)

  • 최영태;이동건;김문규;오주영;조정우
    • 터널과지하공간
    • /
    • 제32권6호
    • /
    • pp.345-352
    • /
    • 2022
  • 도심지 터널 건설에서 발파공법은 민원이 제기되는 문제점이 있어 적용에 제약받고 있다. 이에 대한 대안으로 TBM 및 기계굴착 공법 적용이 필수적으로 검토되고 있다. 이 중 쉴드 TBM(Tunnel Boring Machine)은 굴진과 세그먼트 체결이 번갈아 반복되며 굴진하는 공정을 가지고 있는데, 세그먼트 체결 동안 굴진을 멈추게 된다. 이러한 가동 정지시간을 최소화하고자 세그먼트 체결 중에도 가동할 수 있는 연속굴착형 TBM 기술이 개발되고 있다. 나선형 세그먼트의 굴진 반력을 확보하기 위해 추진잭을 개조하고 신뢰성을 확보하는 연구가 진행 중이다. 또한 체결 중 세그먼트를 제외한 나머지 부분의 추진잭을 가동하는 유압제어 및 유압시스템 설계기술이 개발될 예정이다. 본 보고는 연속굴착형 TBM 과제 중 부품개조 및 유압제어 기술에 대한 일부 내용을 소개한다.