• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.5159-5168
• /
• 2014

The study examined the relationship among metal health, metabolic syndrome and nutrient acceptance according to gender. Implemented until 2010-2012, the 5th Korean National Health and Nutrition Examination Survey, as an original document, was used for the study. The target was problem drinkers with more than 12 points under AUDIT. Regarding mental health, it was classified into stress, depression and suicidal impulse. Metabolic syndrome was defined when three causes of BMI, waist circumference, FBS, HDL and BP were out of the normal range. The nutrient intake was obtained to confirm the energy intake of nine non-nutrients (Nutrient adequacy ratio: NAR) and the proper intake of the average non-nutrient (Mean adequacy ratio: MAR). These variables were analyzed by frequency, cross analysis and multiple regression analysis through SPSS18.0. In the general features, there was a significant difference according to age, occupation and marital status. In mental health, stress, depression and suicidal impulse were examined. Metabolic syndrome was dependant on FBS, HDL and BP. The nutrient acceptance depended on calcium, vitamin A, thiamine, riboflavin, niacin, vitamin C, and MAR. Logistic regression analysis performed on the variables showed significant differences. Stress, depression, and thoughts of suicide was significantly higher in men aged 19-29 years, and women aged 30-49 years. In the case of the male, those who employed have metabolic syndrome more than those who unemployed. In terms of female, those who were belonged into the middle - low economic level have undergone with metabolic syndrome. In the part of a Mean adequacy ratio(MAR), the male who unmarried, employed, were in the middle low economic levelwere higher. In the case of the female, it was higher for those who were in the middle - low economic level. Overall, an effective way of planning the solution regarding mental health, metabolic syndrome and nutrient intake can be found by considering these features.

• Journal of Korean Academic Society of Home Health Care Nursing
• /
• v.7 no.1
• /
• pp.58-72
• /
• 2000

This study was an attempt to encourage the development of a rehabilitation delivery system and programs as a substitute service for hospitalization on the case of car accident patients, such as hospital based home health care nursing services. Various substitute services for hospitalization are required to curtail the length of stay for inpatients who were hospitalized with car accident compensation insurance. It focused on developing an estimation an early discharge day for car accident inpatients based on detailed statements of treatment for 111 inpatients who were hospitalized at the General Hospital in 1997. This study had four specific purposes as follows. First. to find out the utilization of medical services. Second, to estimate the time of early discharge and income increasing effect based on early discharge for those patients. Third, to identify the factors affecting total medical expenditure and the length of stay for those inpatients. Forth, to figure out the need of utilizing home health care nursing service for accident patients. In order to analyze the length of stay and medical expenditure for inpatients who were hospitalized due to car accidents, the authors conducted micro- and macro-analysis of medical and medical expenditure records. Micro-analysis was done by nominal group discussion of 4 expertise with the critical criteria, such as a decrease in the amount of treatment after surgery, treatments, tests, drugs and changes in the test consistency, drug methods, vital signs, start of ROM exercise, doctor's order, patient's outside visiting ability, and stable conditions. In addition to identifying variables affecting medical expenditure, and the length of stay and income effect due to early discharge day, the data was analyzed with a multiple regression analysis and linear regression analysis model by SPSS-PC for windows and Excell program. Results of this study were as follows. First. the mean length of stay was 50.3 days. whereas the mean length of stay due to early discharge was 34.3 days at the hospital. The estimation of time of early discharge depended on the length of stay. The longer the length of stay, the longer the length of time of early discharge : for instance a length of stay under 10 days was estimated as correlating to a mean length of stay of 6.6 days and early discharge of 6.5. The mean length of stay was 217.4 days and the time of early discharge was 110.1 respectively. The mean medical expenditure per day was found to be 169.085 Won and the mean medical expenditure per day showed negative linear trends according to the length of stay at the hospital. The estimation results of the income effect due to being discharged 16 days early was around 2,244,000 won per bed. However. this sum does not represent the real benefits resulting from early discharge, but rather the income increasing amount without considering medical prime cost in the general hospital. Therefore, further analysis is required on the cost containments and benefits as turn over rate per bed as the medical prime costs. The length of stay was most significant and was positive to the total medical expenditure, as expected. Surgery and patient's residential area was also an important variable in explaining medical expenditure. The level of complications was the most significant variable in explaining the length of stay. There was a high level for need a home health care nursing service which further supports early discharge for accident patients. In addition, when the patient was discharged. they needed follow up care for complications suffered during the car accident. $86.8\%$ of discharged patients responded that they needed home health services after early discharge. From these research findings, the following suggestions have been drawn. Strategies on a health care delivery system must be developed in order to focus on the consumer's needs and being planned for 21 century health policy in Korea. Community based intermediate facilities or home health care should be developed for rehabilitation services as a substitute for hospitalization in order to shorten the length of stay would be. A hospital based home health care nursing service. it would be available immediately to utilize by patients who want rehabilitation services as a substitute for hospitalization with the cooperation of car insurance companies.

• Journal of Nutrition and Health
• /
• v.49 no.6
• /
• pp.401-410
• /
• 2016

Purpose: Water is magnetically charged upon contact with a magnet. Although magnetic water products have been promoted since the 1930's, they have not received wide acceptance since their effectiveness is still in question; however, some have reported their therapeutic effects on the body, especially the digestive, nervous, and urinary systems. Methods: In this study, the effect of magnetized water on glycemic control of 14 diabetic mice (CB57BK/KsJ-db/db) in comparison with 10 control mice (CB57BK/KsJ-db/+(db/+)) was investigated. Seven diabetic control (DMC) mice and seven diabetic mice + magnetized water (DM+MW) were kept for 16 weeks, followed by intraperitoneal glucose tolerance test (IPGTT). Weekly blood glucose was measured from tail veins. Blood obtained from heart puncture was used for HbA1c analysis. Results: Blood glucose level showed a significant difference starting from the $10^{th}$ week of study ($496.1{\pm}10.2mg/dl$ in DMC vs. $437.9{\pm}76.9mg/dl$ in DM+MW). Blood glucose followed by IPGTT showed no significant difference between groups at 0, 30, 60, 90, and 120 min, although glucose level at 180 min was significantly reduced in DM+MW mice. Plasma insulin level in DM+MW groups was only 39.5% of that of DMC groups ($5.97{\pm}1.69ng/ml$ in DMC vs. $2.36{\pm}0.94ng/ml$ in DM+MW). Levels of HbA1c were 12.4% and 9.7% in DMC and DM+MW groups, respectively. Conclusion: These results show the promising therapeutic effect of magnetized water in regulating blood glucose homeostasis; however, long-term supplementation or mechanistic study is necessary.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.1
• /
• pp.1-10
• /
• 1982

Degree of grain shattering which is of varietal character is an important determinant for the magnitude of field loss of grains during harvest and threshing. Seven Indica \times Japonica progeny varieties and four Japonica varieties were subjected to measurements of tensile strength of grains, degree of grain shattering when panicles were dropped at 1.5m above concrete floor, and moisture content of grains (wet basis) during a period 35 to 63 days after heading. In addition, two varieties were tested for the relation of tensile strength of grains to the magnitude of field loss of grains in actual binder harvest. The 11 varieties differed conspicuously in tensile strength of grains and the degree of grain shattering: the weakest average tensile strength of grains of a variety was about 90g and the strongest about 250g with varying standard deviation of 30 to 60g. Three Indica \times Japonica varieties and one Japonica variety shattered I to 30% of the grains under the falling test. The threshold tensile strength of grains allowing grain shattering was estimated to be 180g on average for a sampling unit of 10 panicles, but only the grains having tensile strength weaker than 98g within the samples shattered. A decrease in average tensile strength by 10g below the threshold value corresponded to an increase of 3 to 5% in grain shattering. Most varieties did not change appreciably the tensile strength of grains and degree of grain shattering with delay in time of harvest and showed a negative correlation between the tensile strength and the moisture content of grains. The average tensile strength of grains was negatively correlated linearly with field loss in binder harvest. The average tensile strength for zero field loss in binder harvest was estimated to be 174g and a decrease in the average tensile strength by 10g corresponded to an increase of 40kg per hectare in field loss of grains. Instead of the average tensile strength of grains, the percentage of grains having tensile strength weaker than 100g is recommended as a criterion for the estimation of field loss of grains during harvesting operations as well as a basis of variety classification for grain shattering, since the standard deviation of tensile strength of grains varies much with variety and time of harvest, and individual grains having tensile strength stronger than 98 did not shatter practically.

• Korean Journal of Animal Reproduction
• /
• v.25 no.4
• /
• pp.317-325
• /
• 2001

This study investigated the effect of ferrous sulfate (Fe$^{2+}$) and/or ascorbic acid (Asc) on fertilizing ability in vitro of frozen-thawed boar spermatozoa. Using chlortetracycline (CTC) fluorescence, the spermatozoa was treated in preincubation medium with control, Fe$^{2+}$(1 mM), Asc (0.5 mM) and Fe$^{2+}$Asc to assessed for acrosome reaction, and the oocyte penetration test to determine whether the Fe$^{2+}$ and/or Asc can promote the penetration ability in vitro. When frozen-thawed spermatozoa was washed with preincubation medium, there were significantly (P ＜ 0.05) more acrosome-reacted in medium with Fe$^{2+}$Asc (38%) than control (27%). The penetration rates were also significantly (P ＜ 0.05) higher in medium with Fe$^{2+}$Asc (76%) than control (55%). Next, the lipid peroxidation of sperm was evaluated on the basis of malondialdehyde production following same treatments. The addition of Fe$^{2+}$Asc to sperm suspension increases the formation of malondialdehyde. However, there were not significantly different under the all conditions. The sperm suspension were also treated with control, Fe$^{2+}$, Asc and Fe$^{2+}$/Asc and assayed for sulfhydry1(-SH) group content. In the Fe$^{2+}$/Asc group, sperm-SH group were higher than another groups. In spermatozoa treated with Fe$^{2+}$ and/or Asc, however, no changes in sperm -SH-groups were detected when compared to controls. In another experiment, the activity of sperm binding to zona pellucida was evaluated through binding to salt-stored porcine oocytes. In control and Asc treatment groups, sperm binding to zona pellucida were significantly (P ＜ 0.05) higher than in medium with Fe$^{2+}$. On the other hand, there is not a significant increase in binding to zona pellucida with spermatozoa treated by Fe$^{2+}$/Asc. In summary, the present study suggests that Fe$^{2+}$/Asc causes an enhancement in fertilizing ability that is associated with penetration rate increased without change of spermatozoa binding capacity to homologous zona pellucida.o homologous zona pellucida.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.2
• /
• pp.105-110
• /
• 2011

BACKGROUND: In this study, 5 different treatments such as non-treatment, mixed expeller cake 1.0 N (standard nitrogen fertilizer), rice straw, rice straw+mixed expeller cake 0.5 N, rice straw+mixed expeller cake 1.0 N were performed over 4 cropping seasons over 2 years in order to identify the optimal application rate of mixture of rice straw and mixed expeller cake, organic source in organic cultivation of tomatoes. METHODS AND RESULTS: There was no difference in all treatments in case of 200 mg/kg in the nitrate nitrogen content in soil prior to the first cropping season test under the criteria for nitrogen nutrient based on yield of crops, cultivation without fertilizers seems possible. But in the second cropping season, no treatment and rice straw showed the reduction of yield and in the third cropping season, rice-straw+mixed expeller cake 0.5 N treatment showed the significant difference. The content of nitrate nitrogen in soil prior to cropping seasons was evaluated in 160 mg/kg and standard fertilization such as mixed expeller cake, source of nitrogen, are needed due to the deficiency of nitrogen. In terms of application of organic resources, rice straw showed the effects of improvements on physical properties of soil such as bulk density, cation exchange capacity and humus contents, but the mixed expeller cake did not show any significant differences in improvements on physical properties of soil. CONCLUSION(s): Fertilizer management in organic cultivation of tomatoes is thought to produce the reliable quantity of crops as well as keep the high quality of soils by using the optimal application rate of mixed expeller cake according to the contents of nitrate nitrogen in soil and rice straw which improves the physical properties of soil.

• Korean Journal of Environmental Agriculture
• /
• v.18 no.3
• /
• pp.280-286
• /
• 1999

This studies were conducted to evaluate efficiency of microbial inoculator for active composting of food wastes. The Microbial inoculators used in this studies were purchased from different comparise to evaluate their effectiveness for composting of food waste in Korea. The number of bacteria growing at $30^{\circ}C$ in commercial inoculator collected were below $91.0{\times}10^8\;CFU/g$ which were counted from well cured compost made by animal manure. The number of bacteria in commercial microbial inoculator, such as FL, VP, B9, CM and GE were higher than that of composted at $50^{\circ}C$ or $60^{\circ}C$ of incubation temperature. Fungi were counted in GR, VP and B9 as over $10^3CFU/g$ at $30^{\circ}C$ of incubation temperature, while fungi of all the commercial inoculator collected could not grown at $50^{\circ}C$ and $60^{\circ}C$. Actinomycetes in most of the these had higher number($10^5CFU/g$) than that of compost : however, it was not detected at $60^{\circ}C$ incubation temperature from all the samples collected. The amount of carbon dioxid production was order to VP>HU>B9>GE>CM>Control>Compost in the lab scale composting test with or without inoculation of commercial inoculators, however, but the difference in carbon dioxide production was similar among each treatments. The effect of inoculation on composting parmeter such as pH changes, temperature increasing and change of chemicals properties were a little among each treatments, with or without inoculation of commercial inoculator in active composting of food waste. Using commercial inoculator did not show any statistical difference in food waste composting process under various condition such as pH changes, temperature changes, etc.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.146-152
• /
• 2005

The activated carbon was produced from Sancheong bamboo by carbon dioxide gas activation methods. The carbonization of raw material was conducted at $900^{\circ}C$, and $CO_2$ activation reactions were conducted under various conditions: activation temperatures of $750-900^{\circ}C$, flow rates of carbon dioxide $5-30cm^3/g-char{\cdot}min$, and activation time of 2-5 h. The yield, adsorption capacity of iodine and methylene blue, specific surface area and pore size distribution of the prepared activated carbons were measured. The adsorption capacity of iodine (680.8-1450.1 mg/g) and methylene blue (23.5-220 mg/g) increased with increasing activation temperature and activation time. The adsorption capacity of iodine and methylene blue increased with the $CO_2$ gas quantity in the range of $5-18.9cm^3/g-char{\cdot}min$. But those decreased over those range due to the pore shrinkage. The specific volume of the mesopore and macropore of bamboo activated carbon were $0.65-0.91cm^3/g$. Because of this large specific volume, it can be used to the biological activated carbon process. Bamboo activated carbon phisically adsorbed the $CO_2$ of maximum 106 mg/g-A.C in the condition of 90% $CO_2$ and adsorption temperature of $20^{\circ}C$. The $CO_2$ adsorption ability of bamboo activated carbon was not changed in the 5 cyclic test of desorption and adsorption.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.7
• /
• pp.963-971
• /
• 2014

This study investigated the effects of exercise intensity on PGC-$1{\alpha}$, PPAR-${\gamma}$, and insulin resistance in skeletal muscle of high fat diet-fed Sprague-Dawley rats. Forty rats were randomly divided into five groups: sedentary control group (SED), high fat diet group (HF), high fat diet+low-intensity exercise group (HFLE, 22 m/min, 60 min, 6 days/week), high fat diet+moderate-intensity exercise group (HFME, 26 m/min, 51 min), and high fat diet+high-intensity exercise group (HFHE, 30 m/min, 46 min). After 4 weeks of high fat diet and endurance exercise training, the lipid profiles, insulin, and glucose concentrations were determined in plasma. PGC-$1{\alpha}$, PPAR-${\gamma}$, and GLUT-4 contents were measured in plantaris muscle. The rate of glucose transport in soleus muscle was determined under submaximal insulin concentration ($1,000{\mu}IU/mL$ insulin, 20 min) during muscle incubation. Plasma glucose during oral glucose tolerance test in HF was significantly greater than that in SED, and plasma glucose levels in the three exercise (EX) groups were significantly lower that those in SED and HF at 30 and 60 min, respectively (P<0.05). Plasma insulin levels in the EX groups were significantly reduced by 60 min compared to that in HF (P<0.05). The protein expression level of PGC-$1{\alpha}$ as well as muscle glucose uptake were significantly higher in SED and HF than those in the three EX groups (P<0.05), and HFHE showed significantly higher levels than HFLE and HFME. Expression levels of GLUT-4 and PPAR-${\gamma}$ were significantly higher in the HFLE, HFME, and HFHE groups compared to the SED and HF (P<0.05). Therefore, the results of this study indicate that 4 weeks of high fat diet significantly developed whole body insulin resistance but did not affect PGC-$1{\alpha}$, PPAR-${\gamma}$, or the glucose transport rate in skeletal muscle, and exercise training was able to attenuate deteriorated whole body insulin resistance due to high fat diet. In addition, high intensity training significantly affected PGC-$1{\alpha}$ expression and the glucose transport rate of skeletal muscle in comparison with low and middle training intensities.

• The Journal of Korean Academy of Prosthodontics
• /
• v.23 no.1
• /
• pp.39-59
• /
• 1985

The purpose of this study was to investigate how gap distances of 0.13mm, 0.15mm, 0.20mm, and 0.30mm affects solder joint strength from gold alloys and nickel-chromium base alloys and to examine the composition of solder gold, the solder joint of gold alloys and nickel-chromium base alloys. The tensile test specimens were prepared in the split stainless steel mold with a half dumbbell shape 2.5mm in diameter and l2mm in length. 6 pairs of specimens of each gap distance group of gold alloys and nickel-chromium base alloys were made and 48 pairs of all specimens were soldered with solder gold of 666 fineness. All soldered specimens were machined to a uniform diameter and then a tensile load was applied at a cross-head speed of 0.10mm/min using Instron Universal Testing Machine, Model 1115. The fractured specimens at solder gold of solder joint fracture with each gap distance of 0.13mm, 0.15mm, 0.20mm, and 0.30mm were examined under the Scanning Electron Microscope, JSM-35c and the composition of solder gold, the solder joint of gold alloys and nickel-chromium base alloys was analyzed by Electron Probe Micro Analyzer. The results of this study were obtained as follows: 1. In case of soldering of gold alloys, the tensile strength between gold alloys showed $37.33{\pm}2.52kg/mm^2$ at 0.13, $39.14{\pm}3.35kg/mm^2$ at 0.15mm, $43.76{\pm}2.97kg/mm^2$ at 0.20mm, and $49.18{\pm}4.60kg/mm^2$ at 0.30mm. There was statistically significant difference at each gap distance, and so the greater increase of gap distance showed the greater tensile strength. 2. In case of soldering of nickel-chromium base alloys, the tensile strength between nickel-chromium base alloys showed $34.84{\pm}4.26kg/mm^2$ at 0.13mm, $37.25{\pm}2.49kg/mm^2$ at 0.15mm, $42.91{\pm}4.32kg/mm^2$ at 0.20mm, and $46.93{\pm}4.21kg/mm^2$ at 0.30mm. There was not statistically significant difference only between 0.13mm and 0.15mm and bet ween 0.20 mm and 0.30mm, but generally the greater increase of gap distance showed the greater tensile strength. 3. The greater increase of gap distance shoed less porosities in solder gold at solder joint fracture. 4. In solder gold Au, Cu, Ag, Zn, and Sn were composed and Au and Cu were mostly distributed uniformly. 5. In solder joints of solder gold and gold alloys Au, Cu, Ag, Zn, and Sn were composed in solder gold and Au, Cu, Ag, Pt, and Pd were composed in gold alloys. Au and Cu of solder gold and gold alloys were mostly distributed uniformly and the diffusion of other elements except Pt and Pd around the solder joint was not almost found. In solder joints of solder gold and nickel-chromium base alloys Au, Cu, Ag, Zn, and Sn were composed in solder gold and Ni, Cr, and Al were composed in nickel-chromium base alloys. Au and Cu of solder gold and Ni and Cr of nickel-chromium base alloys were mostly distributed uniformly and the diffusion of other elements except Cr around the solder joint was not almost found.