• Journal of Yeungnam Medical Science
• /
• v.16 no.1
• /
• pp.85-93
• /
• 1999

Some reports have shown a decreased effectiveness of extracorporeal shock wave lithotripsy(ESWL) with newer lithotriptors. We compared the treatment results of ESWL with a second generation Northgate SD-3 and a third generation Modulith SLX device. A total of 2,000 patients underwent ESWL treatments for single urinary calculus between September, 1988 and July, 1998. 1,241 patients were treated with Northgate SD-3 between September, 1988 and December, 1995. And 759 patients were treated with Modulith SLX between January, 1996 and July 1998. The treatment results were compared using chi-square test to determine statistical significance. The overall success rate, success rate according to the location and size, the mean number of sessions, complication rate and retreatment rate were calculated, according to lithotriptor. The overall success rate was 90.6% with Northgate SD-3 and 89.1% with Modulith SLX. With Northgate SD-3 and Modulith SLX, the success rate according to the location was 91.0%(579/636) and 88.1%(236/268) in kidney: 93.2%(517/555) and 89.9%(258/287) in upper ureter: 83.3%10/12) and 94.4%167/177) in middle and lower ureter: 47.4%(18/38) and 55. 6%(15/27) in staghorn stone, respectively. The success rate according to the size of stone with Northgate SD-3 and Modulith SLX for stones with the size under 10mm was 96.1%(612/637) and 93.1%(470/505); from 11mm to 20mm was 87.3%(421/482) and 86.4%(165/191); from 21mm to 30mm, 77.5%(62/80) and 67.5%(23/34): and for stones larger than 31mm was 69%(29/42) and 62.1%(18/29), respectively. Mean number of sessions for successful fragmentation was 1.21 and 1.69, respectively with Northgate SD-3 and Modulith SLX. Retreatment rate was 16.7% and 17.5%, respectively. The complications after treatment were severe pain(6.2% with Northgate SD-3 vs. 2.0% with Modulith SLX), steinstrasse(3.4% vs. 1.9%), fever(1.2% vs. 0.5%) and perirenal hematoma(0.2% vs. 0%) in order of frequency. There was no significant difference in the effectiveness of Northgate SD-3 and Modulith SLX. However, a statistically significant difference was observed between the two lithotriptors. We concluded that ESWL with Modulith SLX is more safe compared to Northgate SD-3.

• Applied Biological Chemistry
• /
• v.13 no.3
• /
• pp.207-218
• /
• 1970

Studies were carried out to develope the most economical and practical methods of packaging and preservation of kimchi, so commercialization of kimchi manufacture could proceed rapidly. The results obtained may be summarized as following. (1) It is generally established that the acceptable range of lactic acid content of kimchi is between 0.4% and 0.75%. Based on sensory evaluation, kimchi having lactic acid content below 0.4% and above 0.75% was not edible, and the time of optimum taste corresponded to the vicinity of 0.5% of lactic acid content. For the refrigeration storage with or without preservatives, the packaging kimchi in plastic film must be done at the lactic acid content of 0.45%, for lactic acid fermentation will continue slowly after the packaging. However, for the heat sterilized kimchi the packaging should be done at the 0.5% of lactic acid content for the best because lactic acid fermentation is completely stopped after the packaging. (2) Polyethylene, polypropylene, and polycello were chosen as suitable packaging materials. Polyethylene is cheapest among them but kimchi packaged in this film was damaged frequently in handling process and gave off kimchi flavor. On the other hand polypropylene also gave off kimchi flavor, but its higher mechanical strength gave better protection to kimchi and it had superior display effect due to the transparancy. Therefore polypropylene made much better packaging material. Polycello proved to be the best packaging material from the standpoint of physical characteristics but its price is higher than that of other plastic films. To be effective, the thickness of plastic films for packaging kimchi must exceed 0.08mm. (3) Keeping property of kimchi appeared to be excellent by means of freezing. However, by the time the frozen kimchi was thawed out at room temperature, moisture loss due to drip was extensive, rendering the kimchi too stringy. (4) Preservation of kimchi at refrigerated temperatures proved to be the best method and under the refrigerated condition the kimchi remained fresh as long as 3 months. The best results were obtained when kimchi was held at $0^{\circ}C$. (5) In general, preservatives alone were not too elective in preserving kimchi. Among them potassium sorbate appeared to be most effective with the four fold extension of self-life at $20^{\circ}C$ and two fold extension at $30^{\circ}C$. (6) In heat sterilization the thickness of packaged kimchi product had a geat effect upon the rate of heat penetration. When the thickness ranged from 1.5 to 1.8cm, the kimchi in such package could be sterilized at $65^{\circ}C$ for 20 minutes. Kimchi so heat treated could be kept at room temperature as long as one month without apparent changes in quality. (7) Among combination methods, preservation at refrigerated and heat sterilization could be favorably combined. When kimchi was stored at $4^{\circ}C$ after being sterilized at $65^{\circ}C$ for 20 minutes, it was possible to preserve the kimchi for more than 4 months.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.22 no.1
• /
• pp.53-66
• /
• 1980

The research work is concerned with the analytical and experimental studies on the heat transfer phenomenon around the underground concrete digester used for biogas production Systems. A mathematical and computational method was developed to estimate heat losses from underground cylindrical concrete digester used for biogas production systems. To test its feasibility and to evaluate thermal parameters of materials related, the method was applied to six physical model digesters. The cylindrical concrete digester was taken as a physical model, to which the model,atical model of heat balance can be applied. The mathematical model was transformed by means of finite element method and used to analyze temperature distribution with respect to several boundary conditions and design parameters. The design parameters of experimental digesters were selected as; three different sizes 40cm by 80cm, 80cm by 160cm and l00cm by 200cm in diameter and height; two different levels of insulation materials-plain concrete and vermiculite mixing in concrete; and two different types of installation-underground and half-exposed. In order to carry out a particular aim of this study, the liquid within the digester was substituted by water, and its temperature was controlled in five levels-35。 C, 30。 C, 25。 C, 20。C and 15。C; and the ambient air temperature and ground temperature were checked out of the system under natural winter climate conditions. The following results were drawn from the study. 1.The analytical method, by which the estimated values of temperature distribution around a cylindrical digester were obtained, was able to be generally accepted from the comparison of the estimated values with the measured. However, the difference between the estimated and measured temperature had a trend to be considerably increased when the ambient temperature was relatively low. This was mainly related variations of input parameters including the thermal conductivity of soil, applied to the numerical analysis. Consequently, the improvement of these input data for the simulated operation of the numerical analysis is expected as an approach to obtain better refined estimation. 2.The difference between estimated and measured heat losses was shown to have the similar trend to that of temperature distribution discussed above. 3.It was found that a map of isothermal lines drawn from the estimated temperature distribution was very useful for a general observation of the direction and rate of heat transfer within the boundary. From this analysis, it was interpreted that most of heat losses is passed through the triangular section bounded within 45 degrees toward the wall at the bottom edge of the digesten Therefore, any effective insulation should be considered within this region. 4.It was verified by experiment that heat loss per unit volume of liquid was reduced as the size of the digester became larger For instance, at the liquid temperature of 35˚ C, the heat loss per unit volume from the 0. 1m$^3$ digester was 1, 050 Kcal/hr m$^3$, while at for 1. 57m$^3$ digester was 150 Kcal/hr m$^3$. 5.In the light of insulation, the vermiculite concrete was consistently shown to be superior to the plain concrete. At the liquid temperature ranging from 15。 C to 350 C, the reduction of heat loss was ranged from 5% to 25% for the half-exposed digester, while from 10% to 28% for the fully underground digester. 6.In the comparison of heat loss between the half-exposed and underground digesters, the heat loss from the former was fr6m 1,6 to 2, 6 times as much as that from the latter. This leads to the evidence that the underground digester takes advantage of heat conservation during winter.

• Clinical and Experimental Pediatrics
• /
• v.48 no.10
• /
• pp.1116-1120
• /
• 2005

Purpose : Although the rotavirus-related neonatal death occurred in western part of Kyeonggi Province recently, there were just a few reports about rotavirus gastroentertis in domestic since 2000. We proposed to investigate changes of epidemiology and clinical features of rotavirus gastroenteritis for the last 2 years. Methods : We selected 166 patients diagnosed as gastroenteritis from January, 2002 to July, 2003 and reviewed the admission records retrospectively such as age distribution, sex ratio, seasonal distribution, admission period, laboratory data and dehydration type in the rotavirus group(RVG) and non-RVG. Results : The percentage of patient under 3 years was 77% on RVG. The non-RVG showed even age distribution(P<0.05). In RVG, patients occurred in March frequently and 52% occurred from January to March. In non-RVG, patients occurred highly in February and July(P<0.05). The average of admission period was higher in RVG than non-RVG(P<0.05). The percentage of patient admitted for over 10 days was 8% in the RVG. In dehydration severity, the RVG showed mild(51%), moderate(44%) and severe(5%) respectively, but non-RVG showed only mild dehydration(P<0.05). The laboratory findings' did not have statistic significance between RVG and non-RVG. Conclusion : Compared to the previous studies, seasonal peak prevalence of rotavirus gastroenteritis changed from autumn to spring and patients over 3 years increased. Therefore, we suggest that there are variable serotypes of rotavirus domestically and there is a need for reinvestigation about clinical features and serotypes of rotavirus gastroenteritis.

• Clinical and Experimental Pediatrics
• /
• v.46 no.9
• /
• pp.846-853
• /
• 2003

Purpose : Pneumoccocus is one of the most important causes of invasive infection through the childhood period and the prevelance of antibiotics resistance of pneumococcus is increasing worldwide. A 7-valent conjugate vaccine has been developed. It is important to know the prevalence of each serotype of pneumococci in the countries where the vaccine is used to estimate the coverage rate by the vaccine. Methods : One hundred and twenty seven strains of clinical isolates and 72 strains from healthy carriers recovered from Korean children during the period from 1997 to 2002 were subjected to determination of serotype by Quellung reaction and penicillin susceptibility with oxacillin disc diffusion test. Results : Forty-three per cent of clinical isolates were obtained from children under two years of age. Thirty strains(24%) were isolated from normally sterile body fluids. The frequent serotypes were 19F, 19A, 23F, 6A, 6B and 9V. Fifty-six per cent of the clinical isolates were represented in the current 7-valent protein conjugate pneumococccal vaccine, and 84% when the cross-reactive serotypes were included. Frequent serotypes of strains isolated from one to five year-old healthy children were 19F, 14, 11A, 23F, 18C, and 19A. Seventy-one per cent of the carrier strains were included in the 7-valent vaccine. Ninety-three per cent of the clinical isolates and 86% of carrier strains were not susceptible to penicilline. Conclusion : Fifty-six to 84% of pneumococci recovered from Korean children are covered by the current 7-valent protein conjugate pneumococcal vaccine and the prevalence of penicillin resistance was very high.

• The Journal of Korean Society for Radiation Therapy
• /
• v.23 no.2
• /
• pp.83-90
• /
• 2011

Purpose: This study statistically analyzed the difference of the stability of maintaining a respiratory period shown according to position and use of a device to search the tendency and usefulness of a device. Materials and Methods: The study obtained respiratory signals which maintained a respiratory period for 20 minutes each supine and prone position for 11 subjects. The study obtained respiratory signals in a state of using a belly board for 7 patients in a bad condition of a respiratory period in a prone position to analyze a change in respiration and the stability before and after the use of a device. Results: The supine part showed 54.5%, better than the prone part of 36.4% in a case that the stability for maintaining a respiratory period was in a good condition as a fixed respiratory period was well maintained according to the position. 6 patients (85%) showed a maintenance pattern of a respiratory period significantly different before the use and 4 patients showed a significantly good change in the stability for maintaining a respiratory period as a result that belly boards were used for 7 patients that the maintenance of a respiratory period was not in a good condition on a prone position. Conclusion: It seemed that this study could contribute to the maintenance of respiratory period and of respiratory stability as the optimal position for maintenance of respiration and the use of a device such as a belly board were decided through statistic analysis of respiratory signals and its application even if patient position and use of device were decided by the beam arrangement a treatment part of a patient, location of a target, and an expected plan.

• Restorative Dentistry and Endodontics
• /
• v.33 no.2
• /
• pp.148-161
• /
• 2008

The purpose of this study was to evaluate the effect of chlorhexidine (CHX) on microtensile bond strength (${\mu}TBS$) of dentin bonding systems. Dentin collagenolytic and gelatinolytic activities can be suppressed by protease inhibitors, indicating that MMPs (Matrix metalloproteinases) inhibition could be beneficial in the preservation of hybrid layers. Chlorhexidine (CHX) is known as an inhibitor of MMPs activity in vitro. The experiment was proceeded as follows: At first, flat occlusal surfaces were prepared on mid-coronal dentin of extracted third molars. GI (Glass Ionomer) group was treated with dentin conditioner, and then, applied with 2 % CHX. Both SM (Scotchbond Multipurpose) and SB (Single Bond) group were applied with CHX after acid-etched with 37% phosphoric acid. TS (Clearfil Tri-S) group was applied with CHX, and then, with adhesives. Hybrid composite Z-250 and resin-modified glass ionomer Fuji-II LC was built up on experimental dentin surfaces. Half of them were subjected to 10,000 thermocycle, while the others were tested immediately. With the resulting data, statistically two-way ANOVA was performed to assess the ${\mu}TBS$ before and after thermo cycling and the effect of CHX. All statistical tests were carried out at the 95 % level of confidence. The failure mode of the testing samples was observed under a scanning electron microscopy (SEM). Within limited results, the results of this study were as follows; 1. In all experimental groups applied with 2 % chlorhexidine, the microtensile bond strength increased, and thermo cycling decreased the micro tensile bond strength (P > 0.05). 2. Compared to the thermocycling groups without chlorhexidine, those with both thermocycling and chlorhexidine showed higher microtensile bond strength, and there was significant difference especially in GI and TS groups. 3. SEM analysis of failure mode distribution revealed the adhesive failure at hybrid layer in most of the specimen. and the shift of the failure site from bottom to top of the hybrid layer with chlorhexidine groups. 2 % chlorhexidine application after acid-etching proved to preserve the durability of the hybrid layer and microtensile bond strength of dentin bonding systems.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.1
• /
• pp.15-23
• /
• 1984

Difference of the entering and the escaping behaviour of shrimp(Palaemon pacificus) to the model traps were observed in accordance with netting materials, baits, type of traps and slope of flapper, and gathering responses were also investigated on the odour of bait extracts in the aquarium as the preliminary test. In order to investigate the difference in catch according to type and structure of traps those designated from A to E were made of iron frames and nettings. The type A was a conical shape with two entrances at its both sides and the others were square piller shape with one entrance at their upper surface(type B) or two entrance at their both ends(type C, D and E). However th type D and E were connected with flapper and the thye E was made by attaching iron frames of same height under the type D. The traps were prepared 10 each and so a total of 50 traps were used in the experiment at sea. The main species caught was Charybdis japonica, but Astroconger myriaster was also caught fairly. The catches of these species were significant in difference between the types of traps. That is, Charybdis japonica was caught more in type A, C and D than others and less in type B and E, and Astroconger myriaster was caught more in type A and D and less in type B and E. However the catch of Astroconger myriaster in type C, even if less than that in type A showed no significant difference with the other traps. The total catch of Charybdis japonica and Astroconger myriaster was almost same in order with the catch of Charybdis japonica. The type B and E seemed to be difficult in entering of fishes into them. However, the type A and C seemed to be easy not only in entering, but also in escaping. Especially, the type C showed more escaping. On the other hand, the type D seemed to be not so easy in entering of fishes as type A and C, but very difficult in escaping. Consequently, the escaping of fishes from the traps seemed to be more difficult in conical traps than any other traps. The catches might be influenced by the bait with bag compare to without bag and also the immersed time of traps into water for fishing.

• Journal of Intelligence and Information Systems
• /
• v.21 no.2
• /
• pp.1-18
• /
• 2015

Collaborative filtering(CF) algorithm has been popularly used for recommender systems in both academic and practical applications. A general CF system compares users based on how similar they are, and creates recommendation results with the items favored by other people with similar tastes. Thus, it is very important for CF to measure the similarities between users because the recommendation quality depends on it. In most cases, users' explicit numeric ratings of items(i.e. quantitative information) have only been used to calculate the similarities between users in CF. However, several studies indicated that qualitative information such as user's reviews on the items may contribute to measure these similarities more accurately. Considering that a lot of people are likely to share their honest opinion on the items they purchased recently due to the advent of the Web 2.0, user's reviews can be regarded as the informative source for identifying user's preference with accuracy. Under this background, this study proposes a new hybrid recommender system that combines with users' review mining. Our proposed system is based on conventional memory-based CF, but it is designed to use both user's numeric ratings and his/her text reviews on the items when calculating similarities between users. In specific, our system creates not only user-item rating matrix, but also user-item review term matrix. Then, it calculates rating similarity and review similarity from each matrix, and calculates the final user-to-user similarity based on these two similarities(i.e. rating and review similarities). As the methods for calculating review similarity between users, we proposed two alternatives - one is to use the frequency of the commonly used terms, and the other one is to use the sum of the importance weights of the commonly used terms in users' review. In the case of the importance weights of terms, we proposed the use of average TF-IDF(Term Frequency - Inverse Document Frequency) weights. To validate the applicability of the proposed system, we applied it to the implementation of a recommender system for smartphone applications (hereafter, app). At present, over a million apps are offered in each app stores operated by Google and Apple. Due to this information overload, users have difficulty in selecting proper apps that they really want. Furthermore, app store operators like Google and Apple have cumulated huge amount of users' reviews on apps until now. Thus, we chose smartphone app stores as the application domain of our system. In order to collect the experimental data set, we built and operated a Web-based data collection system for about two weeks. As a result, we could obtain 1,246 valid responses(ratings and reviews) from 78 users. The experimental system was implemented using Microsoft Visual Basic for Applications(VBA) and SAS Text Miner. And, to avoid distortion due to human intervention, we did not adopt any refining works by human during the user's review mining process. To examine the effectiveness of the proposed system, we compared its performance to the performance of conventional CF system. The performances of recommender systems were evaluated by using average MAE(mean absolute error). The experimental results showed that our proposed system(MAE = 0.7867 ~ 0.7881) slightly outperformed a conventional CF system(MAE = 0.7939). Also, they showed that the calculation of review similarity between users based on the TF-IDF weights(MAE = 0.7867) leaded to better recommendation accuracy than the calculation based on the frequency of the commonly used terms in reviews(MAE = 0.7881). The results from paired samples t-test presented that our proposed system with review similarity calculation using the frequency of the commonly used terms outperformed conventional CF system with 10% statistical significance level. Our study sheds a light on the application of users' review information for facilitating electronic commerce by recommending proper items to users.

• Microbiology and Biotechnology Letters
• /
• v.30 no.4
• /
• pp.402-409
• /
• 2002

The effects of protein-bound polysaccharides (A-PBP and L-PBP) that were extracted from the mycelia of two edible mushrooms, namely Agaricus blazai and Lentinus edodes, on serum cholesterol and body weight were investigated in mice and female volunteers. Six groups of Male Balb/c mice were fed six kinds of diet supplement- solutions composed of L-PBP, A-PBP, chitosan, and other fiber constituents, for 30 days under the normal diet. Ninety female volunteers were also supplemented for 8 weeks with six kinds of capsules including control and five test groups as the same manners (two times a day, 4 capsules). From 12 days after feeding of L-PBP (Group I) and A-PBP (Group II), the weight of mice began to reduce as compared with control, whereas that of Group III fed chitosan was decreased 15 days after feeding. Group W and Group V which were fed mixture of L-PBP, A-PBP, chitosan, and other dietary fiber, were more significant in lowering weight. After 4 weeks of the supplementation in women, their serum LDL-cholesterol level and body weights in Group I and II were reduced, but Croup 111 taken with chitosan capsule showed weaker effect than Group I and II. After 8 weeks, LDL-cholesterol content in the sera of Group I (132.5 mg/dL) and II(131.5 mg/dL) was decreased to ideal level (125.4 and 122.8 mg/dL) for healthy blood vessel. In the case of Group W supplemented with mixture of L-PBP, A-PBP, and chitosan, the weight-reduction effect (11.8%) and hypocholesterolemic effect (11.0%) was most significant, indicating their synergistic action. These data suggested that the weight-controlling and hypolipidemic effect of L-PBP and A-PBP was involved, at least in part, in absorption of cholesterol as their role of dietary fiber, as well as cholesterol metabolism.