• 품질경영학회지
• /
• 제28권3호
• /
• pp.18-30
• /
• 2000

Recent studies have shown that the $\bar{X}$ chart with variable sampling intervals(VSI) and the $\bar{X}$ chart with variable sample size(VSS) are much quicker than Shewhart $\bar{X}$ chart in detecting shiks in the process. Shewhart $\bar{X}$ chart has been beneficial to detect large shifts but it is hard to apply Shewhart $\bar{X}$ chart in detecting moderate shifts in the process mean. In this article the $\bar{X}$ chart using variable sample size(VSS) and variable sampling Intervals(VSI) has been proposed to supplement the weak point mentioned above. So the purpose of this paper is to consider finding the design parameters which minimize expected loss costs for unit process time and measure the performance of VSSI(variable sample size and sampling interval) $\bar{X}$ chart. It is important that assignable causes be detected to maintain the process controlled. This paper has been studied under the assumption that one cycle is from starting of the process to eliminating the assignable causes in the process. The other purpose of this article is to represent the expected loss costs in one cycle with three process parameters(sample size, sampling interval and control limits) function and find the three parameters.

• Industrial Engineering and Management Systems
• /
• 제8권3호
• /
• pp.131-138
• /
• 2009

The variable sampling inspection scheme with screening for the purpose of assuring the upper limit of maximum expected surplus loss after inspection has been proposed. In this inspection scheme, it has been assumed that a product lot consists of products manufactured through a single production line and lot quality characteristics follow a normal distribution. In the previous literature with respect to inspection schemes, it has been commonly assumed that lot quality characteristics obey a single normal distribution under the condition that all products are manufactured in the same condition. On the other hand, the production line is designed in order that the workload of respective processes becomes uniform from the viewpoint of line balancing. One of the solutions for the bottleneck process is to arrange the workshops in parallel. The lot quality characteristics from such a production line with the process consisting of some parallel workshops might not follow strictly the single normal distribution. Therefore, we expand an applicable scope of the above mentioned variable sampling inspection scheme with screening in this article. Concretely, we consider the variable sampling inspection with screening for the purpose of assuring the upper limit of average outgoing surplus quality loss in the production lots when the lot quality follows the mixed normal distribution.

• Journal of Electrical Engineering and Technology
• /
• 제9권6호
• /
• pp.1832-1842
• /
• 2014

A novel probabilistic small signal stability analysis (PSSSA) method considering load correlation is proposed in this paper. The superiority Latin hypercube sampling (LHS) technique combined with Monte Carlo simulation (MCS) is utilized to investigate the probabilistic small signal stability of power system in presence of load correlation. LHS helps to reduce the sampling size, meanwhile guarantees the accuracy and robustness of the solutions. The correlation coefficient matrix is adopted to represent the correlations between loads. Simulation results of the two-area, four-machine system prove that the proposed method is an efficient and robust sampling method. Simulation results of the 16-machine, 68-bus test system indicate that load correlation has a significant impact on the probabilistic analysis result of the critical oscillation mode under a certain degree of load uncertainty.

• 한국조사연구학회지:조사연구
• /
• 제5권2호
• /
• pp.49-70
• /
• 2004

표본조사에서 사용 가능한 보조변수가 있는 경우에 추정의 효율을 높이기 위하여 보조변수를 활용하는 방법이 다각적으로 개발되어 왔다. 이 논문은 보조변수를 효과적으로 이용하는 방법 중의 하나인 일반회귀추정량에 대한 개괄적인 고찰이다. 일반회귀추정량의 출현부터 분산추정법의 제안까지 이론전개 과정을 살펴보았으며, 보정추정량 및 QR추정량과의 관련성을 통하여 일반회귀추정량의 성질을 알아보았다. 특히 분산추정에서 통상적인 설계기반 분산추정량이 가지는 조건부 성질의 약점을 보완하기 위하여 가중잔차기법을 사용하는 과정을 살펴보았다. 층화표집이나 집략표집과 같은 복합설계에서 활용할 수 있는 일반회귀추정량의 형태를 소개하였고, 마지막으로 일반회귀추정량의 장단점, 그리고 향후 이론적인 발전방향 및 실용적인 발전방향을 언급하였다.

• 전자공학회논문지B
• /
• 제30B권5호
• /
• pp.62-72
• /
• 1993

The phased array antenna has the ability to perform adaptive sampling by directing the radar beam without inertia in any direction. The adaptive sampling capability of the phased array antenna allows each sampling time interval to be varied for each target, depending on the acceleration of each target at any time. In this paper we design a three dimensional adaptive target tracking algorithm for the phased array radar system with a given set of measurement parameters. The tracking algorithm avoids taking unnecessarily frequent samples, while keeping the angular prediction error within a fraction of antenna beamwidth so that the probability of detection will not be degraded during a track updata illuminations. In our algorithm, the target model and the sampling rate are selected depending on the target range and the target maneuver status which is determined by a maneuver level detector. A detailed simulation is conducted to test the validity of our tracking algorithm for target trajectories under various conditions of maneuver.

• Smart Structures and Systems
• /
• 제17권4호
• /
• pp.647-667
• /
• 2016

In this paper, dynamic displacement is estimated with high accuracy by blending high-sampling rate acceleration data with low-sampling rate displacement measurement using a two-stage Kalman estimator. In Stage 1, the two-stage Kalman estimator first approximates dynamic displacement. Then, the estimator in Stage 2 estimates a bias with high accuracy and refines the displacement estimate from Stage 1. In the previous Kalman filter based displacement techniques, the estimation accuracy can deteriorate due to (1) the discontinuities produced when the estimate is adjusted by displacement measurement and (2) slow convergence at the beginning of estimation. To resolve these drawbacks, the previous techniques adopt smoothing techniques, which involve additional future measurements in the estimation. However, the smoothing techniques require more computational time and resources and hamper real-time estimation. The proposed technique addresses the drawbacks of the previous techniques without smoothing. The performance of the proposed technique is verified under various dynamic loading, sampling rate and noise level conditions via a series of numerical simulations and experiments. Its performance is also compared with those of the existing Kalman filter based techniques.

• ETRI Journal
• /
• 제33권3호
• /
• pp.326-334
• /
• 2011

This paper outlines the time jitter effect of a sampling clock on a software-defined radio technology-based digital intermediate frequency (IF) transceiver for a mobile communication base station. The implemented digital IF transceiver is reconfigurable to high-speed data packet access (HSDPA) and three bandwidth profiles: 1.75 MHz, 3.5 MHz, and 7 MHz, each incorporating the IEEE 802.16d worldwide interoperability for microwave access (WiMAX) standard. This paper examines the relationship between the signal-to-noise ratio (SNR) characteristics of a digital IF transceiver with an under-sampling scheme and the sampling jitter effect on a multichannel orthogonal frequency-division multiplexing (OFDM) signal. The simulation and experimental results show that the SNR of the OFDM system with narrower band profiles is more susceptible to sampling clock jitter than systems with relatively wider band profiles. Further, for systems with a comparable bandwidth, HSDPA outperforms WiMAX, for example, a 5 dB error vector magnitude improvement at 15 picoseconds time jitter for a bandwidth of WiMAX 3.5 MHz profile.

• 산업경영시스템학회지
• /
• 제20권41호
• /
• pp.147-156
• /
• 1997

This Study deals with the problem of determining a minimum cost sampling inspection plan for destructive testing by attribute. The linear cost model(LCM) is constructed under the assumption that unit cost, destructive testing cost, producer's risk cost, consumer's risk cost are given. For the solution from the LCM, we assumed the uniform distribution as a prior distribution.

• 품질경영학회지
• /
• 제25권3호
• /
• pp.39-50
• /
• 1997

Markov chain method to evaluate the properties of control charts with variable sampling intervals(VSI0 for simultaneously monitoring several correlated quality characteristics under multivariate normal process are investigated. For comparing the efficiencies and properties of multivariate control charts, we consider multivariate Shewhart, CUSUM and EWMA charts in terms of average time to signal(ATS) and average number of samples to signal(ANSS). We obtained stabilized numerical results with Markov chain method when the number of transient state is greater than 100.

• Journal of the Korean Statistical Society
• /
• 제32권2호
• /
• pp.175-191
• /
• 2003

An empirical Bayesian approach is discussed for estimation of characteristics from the two-way balanced rotation sampling design which includes U.S. Current Population Survey and Canadian Labor Force Survey as special cases. An empirical Bayesian estimator is derived for monthly effect under presence of two types of biases and correlations It is shown that the marginal distribution of observation provides more general correlation structure than that frequentist has assumed. Consistent estimators are derived for hyper-parameters in Normal priors.