• Toxicological Research
• /
• v.27 no.3
• /
• pp.153-160
• /
• 2011

To evaluate the whitening effect of black tea water extract (BT), BT was topically applied to artificially hyperpigmented spots on the back skins of brown guinea-pigs (weight: 450~500 g) induced by 1,500 mJ/$cm^2$ of ultraviolet B (UVB) irradiation. The test compounds of 30 ${\mu}l$ were applied twice a day, six days a week, for four weeks. The artificially hyperpigmented spots were divided into 5 groups: control (UVB + saline, C), vehicle control [UVB + propylene glycol: ethanol: water (5 : 3 : 2), VC], positive control (UVB + 2% hydroquinone, PC), experimental 1 (UVB + 1% BT), experimental 2 (UVB + 2% BT). After 4-week application, the spots were removed by biopsy punch under anesthetic condition and used as specimens for the histological examination. The total polyphenol and flavonoid contents of BT were 104 and 91 mg/g, respectively. The electron-donating ability of BT revealed a dose-dependent response, showing the excellent capacities of 86% at 800 ${\mu}g$/ml. The artificially hyperpigmented spots treated with the PC and BT were obviously lightened compared to the C and VC groups. At the fourth week, the melanin indices for the PC and BT groups were significantly lower (p < 0.001) than those of the C and VC groups. In histological examination, PC and BT groups were significantly reduced in the melanin pigmentation, the proliferation of melanocytes and the synthesis of melanosomes compared to the C and VC groups. It is found that BT inhibits the proliferation of melanocytes and synthesis of melanosomes in vivo using brown guinea pigs, thereby showing a definite skin whitening effect.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.12 no.1
• /
• pp.93-100
• /
• 2016

Since the sodium-cooled fast reactor is operated in a hostile environment due to the use of liquid sodium as its coolant, advanced techniques for in-service inspection are required to periodically verify the integrity of the reactor. This paper presents the development of in-service inspection techniques for Proto-type Generation IV Sodium-cooled Fast Reactor. First, the 10 m long plate-type ultrasonic waveguide sensor has been developed for in-service inspection of reactor internals, and its feasibility was verified through several under-water and under-sodium experiments. Second, the combined inspection system for in-service inspection of ferromagnetic steam generator tubes has been developed. The remote field eddy current testing and magnetic flux leakage testing can be conducted simultaneously by using the developed inspection system, and the detectability was demonstrated through several damage detection experiments. Finally, the electro-magnetic acoustic transducer which can withstand high temperature and be installable in the remote operated vehicle has been developed for in-service inspection of the reactor vessel, and its detectability was investigated through damage detection experiments.

• Journal of Environmental Science International
• /
• v.18 no.9
• /
• pp.1011-1015
• /
• 2009

The vegetated porous pavement can be installed as an alternative way to replace the traditional pavement, which contributes less to the water circulation system in the urban area. This study aims to an investigation based on the shadow and pressure of the vehicle system, where the turfgrass get grown and the green block get constructed on the grassy parking lot. This study might achieve these conclusions, in the case of use 'green block' makes grass parking lot, plant a kind of 'zenith' and takes sod thickness 40 mm are more efficient for turfgrass growth in the early times. In the case of parking over 8 hours in a day, after 5 weeks turfgrass growth would come into reduce. So over 4 hours parking and after 9 weeks, we need consider to setting up green block in grassy parking lot. The grassy ground would get pressured by the vehicles' load and it would bring into some damage due to the load after 3 weeks. So we should put the grass's growth root point under the designed a top of 'green block' level. When the vehicle amounts and parking density is in a low level, it could be an environmentally friendly product.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.2
• /
• pp.30-34
• /
• 2021

Electrical failures and reliability problems of electronic components by ionic migration between adjacent device terminals have become an issue in automotive electronics. Especially unlike galvanic corrosion, ionic migration is occurred at high temperature and high humidity under applied electric field condition. Until now, although extensive studies of the ionic migrations dealing with PCBs, electrodes, and solders were reported, there is no study on the effect of insulation polymers and metallic fillers for ionic migration. In this research, therefore, ionic migration induced by the types and contents of polymers and metallic fillers, and variety conditions of temperature, humidity, and applied voltage was studied in detail. Ester and amide types of liquid crystal polymer (LCP) and poly (phthalamide) (PPA) were used as base polymers, respectively and compounded with the metallic fillers of Copper iodide (CuI), Zinc stearate (Zn-st), or Calcium stearate (Ca-st) in various compositions. The compounding polymers were fabricated in IPC-B-24 of SIR test coupon according to ISO 9455-17 with Cu electrodes for ionic migration test. While there is no change in LCP-based samples, ionic migration in PPA compounding sample with a high water absorption property was accelerated in the presence of 0.25 wt% or above of CuI at the environmental conditions of 85℃, 85% RH and 48V. The dendritic short-circuit growth of Cu caused by ionic migration between the electrodes on the surface of compounded polymers was systematically observed and analyzed by using optical microscopy and SEM (EDX).

• Journal of the Korean Solar Energy Society
• /
• v.37 no.6
• /
• pp.39-49
• /
• 2017

Pool boiling, one of the key thermal-hydraulics phenomena, has been widely studied for improving heat transfer efficiencies and safety of nuclear power plants, refrigerating systems, solar-collector heat pipes, and other facilities and equipments. In the present study, the critical heat flux (CHF) and heat-transfer coefficients were tested under the pool-boiling state using graphene M-5 and M-15 nanofluids as well as oxidized graphene M-5 nanofluid. The results showed that the highest CHF increase for both graphene M-5 and M-15 was at the 0.01% volume fraction and, moreover, that the CHF-increase ratio for small-diameter graphene M-5 was higher than that for large-diameter graphene M-15. Also at the 0.01% volume fraction, the oxidized graphene M-5 nanofluid showed a 41.82%-higher CHF-increase ratio and a 26.7%-higher heat-transfer coefficient relative to the same nanofluid without oxidation treatment at the excess temperature where the CHF of distilled water occurs.

• Biomolecules & Therapeutics
• /
• v.4 no.4
• /
• pp.354-363
• /
• 1996

This study was conducted to investigate the repeated dose toxicity of DA-9601, an antiulcer agent of Artemisia app. extract, in rats. DA-9601 was administered orally once a day for 4 weeks to 10 males and 10 females per group at doses of 0(vehicle control), 125, 500 or 2000 mg/kg/day. Throughout the study, no treatment-related deaths and clinical signs were observed. In female rats receiving 125 mg/kg of DA-9601, water consumption increased slightly on day 4, 11 and 25. Hematological examination showed a decrease of MCV and an increase of PLT in male rats at the doses of 500 and 2000 mg/kg groups. Blood biochemistry revealed slight decreases of cholesterol, BUN and Na in male rats and decreases of total bilirubin and creatinine and slight increases of globulin and Cl in female rats. The organ weights at the end of 4 weeks showed slight changes in some organs of treated groups. But, all these changes were not considered to be of toxicological importance, because they did not show dose-response relationship and relevance to gross and microscopic findings. Histopathologically, abnormal treatment-related changes were not observed in any organ and target organs were not detected. On the basis of these results, the NOAEL(no-observed-adverse-effect level) of DA-9601 was estimated to be more than 2000 mg/kg/day under the conditions tested.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.5
• /
• pp.374-380
• /
• 2016

The large drift and angle of attack motion of an ROV (Remotely operated vehicle) cannot be modeled using the typical hydrodynamic coefficients of conventional straight running AUVs and specific slender bodies. In this paper, the ROV hull is divided into several simple-shaped components to model the hydrodynamic force and moment. The hydrodynamic force and moment acting on each component are modeled as the components of added mass force and drag using the known values for simple shapes such as a cylinder and flat plate. Since an ROV is operated under the water, the only environmental force considered is the current effect. The target ROV dealt with in this paper has six thrusters, and it is assumed that its maneuvering motion is determined using a thrust allocation algorithm. Tracking simulations are carried out on the ship’s surface near the stern, bow, and midship sections based on the modeling of the hydrodynamic force and current effect.

• Applied Chemistry for Engineering
• /
• v.30 no.6
• /
• pp.687-693
• /
• 2019

As the hydrogen fuel cell market is expanded starting from hydrogen electric vehicle and power generation field, the demand for fuel cells and hydrogen increases recently. Therefore, research works on fuel cell durability and fuel efficiency are required in order to activate the fuel cell market and commercialization. A dead-ended anode system was used in this study to optimize the fuel cell performance and fuel efficiency. The effect of purge condition according to the applied current and hydrogen supply pressure on the fuel cell performance were evaluated. In addition, the influence of water back diffusion on the different electrolyte membrane thickness was analyzed. The accumulated water was purged with a solenoid valve in the case of 3% voltage decrease in the dead-ended anode system. The experiment was performed with the hydrogen supply pressure of 0.1~0.5 bar and purge duration of 0.1~1 second. A maximum fuel efficiency of 98.9% was achieved under the purge duration of 0.1 s and hydrogen supply pressure of 0.1 bar with a NR 211 (25.4 um) membrane. However, the fuel cell performance decreased in a long-term operation due to some frequent flooding. The fuel efficiency and purge interval increased due to decreased back diffusion rates of the water and nitrogen with a NR 212 (50.8 um) membrane.

• Journal of Pharmaceutical Investigation
• /
• v.41 no.6
• /
• pp.331-336
• /
• 2011

The instability of hirsutenone (HST), a potential therapeutic candidate for the treatment of atopic dermatitis (AD) and ovarian carcinoma, is one of the main concerns for the development of drug product. In the present study, aqueous stability of HST was investigated by kinetic analysis, and the effect of several factors covering temperature, nitrogen gas ($N_2$) flushing, and selection of proper antioxidant was compared. Cosolvent system composed of distilled water and methanol (9:1 v/v) was used as a vehicle to dissolve HST at the concentration of $200{\mu}g/mL$. Samples of aqueous solution were prepared under the absence or presence of antioxidants, such as ascorbic acid (AA), sodium edetate (EDTA), and ascorbyl palmitate (AP), and subjected for stability test. The degradation of HST in aqueous solution was followed by the first order kinetics with an extremely short half life of less than a week at room temperature, and was accelerated as the temperature increased. $N_2$ flushing brought a little enhancement in stability compared to control solution, but the effect was insufficient. The addition of AA and EDTA (0.1%) significantly enhanced the stability of HST at $40^{\circ}C$, but the addition of AP (0.01%) was limited due to its water insolubility and revealed no promising result. The stability of HST was increased proportionally by the amount of AA added, showing the difference in degree of stabilization as an order of magnitude. Finally, we conclude that HST was stabilized by the addition of a suitable antioxidant, suggesting AA as the most effective stabilizer.

• Natural Product Sciences
• /
• v.22 no.3
• /
• pp.180-186
• /
• 2016

This research is to estimate the toxicity of Atractylodis Rhizoma Alba (ARA) in F344 rats and to find a dose level for the 13 weeks toxicity study. A hot water extract of ARA (ARWE) was administered orally to F344 rats at dose levels of 0 (vehicle control), 500, 1000, 2000, 3500, and 5000 mg/kg/day for 2 weeks. Each group was composed to five male and five female F344 rats. According to the result, there were no ARWE-related adverse changes in mortality, body weights, food consumption, urinalysis, hematology, clinical chemistry, gross finding at necropsy, and organ weight examination. Salivation was observed in 3500 and 5000 mg/kg/day in male and female rats but it could not have found any relationship with ARWE administration. Based on our findings, ARWE may not cause toxicity in rats under the experimental conditions. Therefore, dose level of 5000 mg/kg/day as a highest treatment group in 13-week exposure study is recommended for further toxicity assessment.