• Coupled systems mechanics
• /
• 제7권6호
• /
• pp.707-729
• /
• 2018

The semi-active optimal vibration control of nonlinear torsion-bar suspension vehicle systems under random road excitations is an important research subject, and the boundedness of MR dampers and the uncertainty of vehicle systems are necessary to consider. In this paper, the differential equations of motion of the coupling torsion-bar suspension vehicle system with MR damper under random road excitation are derived and then transformed into strongly nonlinear stochastic coupling vibration equations. The dynamical programming equation is derived based on the stochastic dynamical programming principle firstly for the nonlinear stochastic system. The semi-active bounded parametric optimal control law is determined by the programming equation and MR damper dynamics. Then for the uncertain nonlinear stochastic system, the minimax dynamical programming equation is derived based on the minimax stochastic dynamical programming principle. The worst-case disturbances and corresponding semi-active bounded parametric optimal control are obtained from the programming equation under the bounded disturbance constraints and MR damper dynamics. The control strategy for the nonlinear stochastic vibration of the uncertain torsion-bar suspension vehicle system is developed. The good effectiveness of the proposed control is illustrated with numerical results. The control performances for the vehicle system with different bounds of MR damper under different vehicle speeds and random road excitations are discussed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1853-1858
• /
• 2004

This paper presents the development of a full order sliding mode controller for tracking problem of a class of uncertain dynamical system, in particular, the direct drive robot manipulators. By treating the arm as an uncertain system represented by its nominal and bounded parametric uncertainties, a new robust fullorder sliding mode tracking controller is derived such that the actual trajectory tracks the desired trajectory as closely as possible despite the non-linearities and input couplings present in the system. A proportional-integral sliding surface is chosen to ensure the stability of overall dynamics during the entire period i.e. the reaching phase and the sliding phase. Application to a three DOF direct drive robot manipulator is considered.

• Structural Engineering and Mechanics
• /
• 제23권6호
• /
• pp.599-613
• /
• 2006

A method for the dynamical analysis of FE discretized uncertain linear and nonlinear structures is presented. This method is based on the moment equation approach, for which the differential equations governing the response first and second-order statistical moments must be solved. It is shown that they require the cross-moments between the response and the random variables characterizing the structural uncertainties, whose governing equations determine an infinite hierarchy. As a consequence, a closure scheme must be applied even if the structure is linear. In this sense the proposed approach is approximated even for the linear system. For nonlinear systems the closure schemes are also necessary in order to treat the nonlinearities. The complete set of equations obtained by this procedure is shown to be linear if the structure is linear. The application of this procedure to some simple examples has shown its high level of accuracy, if compared with other classical approaches, such as the perturbation method, even for low levels of closures.

• Structural Engineering and Mechanics
• /
• 제29권5호
• /
• pp.489-504
• /
• 2008

In piezoelectric flexible structures, the contribution of vibration modes to the dynamic response of system may change with the location of piezoelectric actuator patches, which means that the ability of actuators to control vibration modes should be taken into account in the development of modal reduction model. The spatial $H_2$ norm of modes, which serves as a measure of the intensity of modes to system dynamical response, is used to pick up the modes included in the reduction model. Based on the reduction model, the paper develops the state-space representation for uncertain flexible tructures with piezoelectric material as non-collocated actuators/sensors in the modal space, taking into account uncertainties due to modal parameters variation and unmodeled residual modes. In order to suppress the vibration of the structure, a dynamic output feedback control law is designed by imultaneously considering the conflicting performance specifications, such as robust stability, transient response requirement, disturbance rejection, actuator saturation constraints. Based on linear matrix inequality, the vibration control design is converted into a linear convex optimization problem. The simulation results show how the influence of vibration modes on the dynamical response of structure varies with the location of piezoelectric actuators, why the uncertainties should be considered in the reductiom model to avoid exciting high-frequency modes in the non-collcated vibration control, and the possiblity that the conflicting performance specifications are dealt with simultaneously.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.687-690
• /
• 1991

In deterministic design of feedback controllers for uncertain dynamical systems, the bound on the uncertainty is an important clue to guarantee the asymptotic stability or uniform ultimate boundedness of the closed-loop system. In this paper, using only the measurable output we propose an adaptation law for the estimation of the bound of the uncertainty. And based on this adaptation law an adaptive control which renders the uncertain dynamical systems uniformly ultimately bounded is constructed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1262-1266
• /
• 2003

Fuzzy sliding mode controller for a class of uncertain nonlinear dynamical systems is proposed and analyzed. The controller's construction and its analysis involve sliding modes. The proposed controller consists of two components. Sliding mode component is employed to eliminate the effects of disturbances, while a fuzzy model component equipped with an adaptation mechanism reduces modeling uncertainties by approximating model uncertainties. To demonstrate its performance, the proposed control algorithm is applied to an inverted pendulum. The results show that both alleviation of chattering and performance are achieved.

• Structural Engineering and Mechanics
• /
• 제28권4호
• /
• pp.373-386
• /
• 2008

In this study stochastic analysis of non-linear dynamical systems under ${\alpha}$-stable, multiplicative white noise has been conducted. The analysis has dealt with a special class of ${\alpha}$-stable stochastic processes namely sub-Gaussian white noises. In this setting the governing equation either of the probability density function or of the characteristic function of the dynamical response may be obtained considering the dynamical system forced by a Gaussian white noise with an uncertain factor with ${\alpha}/2$- stable distribution. This consideration yields the probability density function or the characteristic function of the response by means of a simple integral involving the probability density function of the system under Gaussian white noise and the probability density function of the ${\alpha}/2$-stable random parameter. Some numerical applications have been reported assessing the reliability of the proposed formulation. Moreover a proper way to perform digital simulation of the sub-Gaussian ${\alpha}$-stable random process preventing dynamical systems from numerical overflows has been reported and discussed in detail.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.439-445
• /
• 1990

All models of dynamical systems invariably have some measure of uncertainties associated with some of their dynamics. The recent approaches to establish robustness of stabilizing feedback control against the possible uncertainties have a serious limitation, that is their applicability only to the systems that satisfy the matching conditions. Such conditions are rarely met in general applications. If a particular system satisfies the matching conditions, the addition of an actuator will destroy the satisfaction of such conditions. In this paper, we develop robust control algorithm for uncertain multivariable systems in which the matching conditions are not necessarily met. We empoly Lyapunov's second method to derive robust stabilizing controllers which guarantee asymptotic stability against prescribed uncertainties. The derivation consists of transforming the original uncertain system to controllable canonical form and constructing a constant switching surface by designing the closed-loop characteristics as a function of the uncertainties. Numerical examples are discussed as illustrations.

• 전기전자학회논문지
• /
• 제7권2호
• /
• pp.156-165
• /
• 2003

본 논문은 불확실한 비선형 계통에 대해서 강인한 적응 퍼지 관측기를 설계하는 방법을 제시한다. 새로 제시하는 관측기는 관측기 설계시 관측오차의 동특성식이 SPR (strictly positive real)이어야 한다는 조건이 불필요하다. 또한 불확실한 항에 대한 유계상수도 추정하는 알고리듬을 사용하여 강인항의 이득값을 설계자가 미리 결정할 필요가 없게 된다. 설계된 관측기를 포함한 전체 폐루프 계통에 대해서 리아프노브 안정도를 증명하였으며 관측오차를 포함한 계통의 모든 신호들의 반전역적 유계(semi-global uniform ultimate boundedness)임을 증명하였다. 이론적으로 도출된 결과를 mass-spring-damper 계통에 대한 모의실험을 수행하여 제안된 관측기의 효율성과 성능을 보였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.26.6-26
• /
• 2001

In this paper we introduce a new algorithm that enables radial basis function network(RBFN) to be structured automatically and guarantees the stability of the RBFN. Because this new algorithm is efficient and also have the advantage of fast computational speed we adopt this algorithm as online learning scheme for uncertain nonlinear dynamical systems. Based on the fact that a 3-layered RBFN can represent a specific nonlinear function reasonably well by linearly combining a set of nonlinear and localized basis functions, we show that this RBFN can identify the nonlinear system very well without knowing the information of the system in advance.