• 한국압력기기공학회 논문집
• /
• 제7권3호
• /
• pp.40-47
• /
• 2011

KSNPs(Korea Standard Nuclear Power Plant) have been applied the break exclusion criteria to the high energy lines passing through containment penetration area to ensure that piping failures would not cause the loss of containment isolation function, and to reduce the resulting dynamic effects. Systems with the criteria are the Main Steam system, Feed Water system, Steam Generator Blowdown system, and Chemical & Volume Control system. In accordance with FSAR(Final Safety Analysis Report), a 100% volumetric examination by augmented in-service inspection of all pipe welds appled the break exclusion criteria is required for the break exclusion application piping. However, it is difficult to fully satisfy the requirements of inspection because 12", 8" and 6" weldolet weldments of Main Steam pipe line have complex structural shapes. To resolve the difficulty on the application of conventional UT(Ultrasonic Testing) technique, realistic mock-ups and UT calibration blocks were made. Simulations of conventional UT were performed utilizing CIVA, a commercial NDE(Nondestructive Examination) simulation software. Phased array UT experiments were performed through mock-up including artificial notch type flaws. A phased array UT technique is finally developed to improve the reliability of ultrasonic test at main steam line pipe to 12", 8" and 6" branch connection weld.

• 한국임상수의학회지
• /
• 제34권5호
• /
• pp.359-365
• /
• 2017

Two spaniel dogs were presented with a history of lethargy, weakness, refractory hypoglycemia, and episodic seizure. A pancreatic mass on the distal end of the left limb was identified through screening tests including dualphase CT angiography in each patient. Canine insulinoma was suspected with low blood glucose, low fructosamine, and normal to high serum insulin levels. Exploratory laparotomies were performed, and partial pancreatectomy using an ultrasonic-activated scalpel was achieved without enzyme leakage or fistula formation after surgery. The lesions were definitively diagnosed as insulinoma via histopathologic examination. One dog has been doing well until POD 870 with medication; in the other dog, diffuse hepatic nodules noted during surgery were confirmed as a liver metastasis. This dog died at POD 45. This case report addresses the utility of the ultrasonic scalpel in partial pancreatectomy for the treatment of canine insulinoma and differences in prognosis according to disease stage.

• 재활복지공학회논문지
• /
• 제4권1호
• /
• pp.15-21
• /
• 2010

초음파자극기의 오동작이나 부작용에 대한 예방으로 안전성 확보와 품질 향상이 필요하며 이를 위한 시판전의 시험검사나 시판후의 수거검사시에 안전성 및 성능평가를 위한 표준시험방법 이 필요하다. 본 논문에서는 초음파자극기에 대한 전기적 안전성 평가를 위한 필수시험과 성능평가를 위한 표준시험방법을 연구하였다.

• 한국임상수의학회지
• /
• 제35권6호
• /
• pp.294-298
• /
• 2018

This report presents a rare case of feline exocrine pancreatic ductal carcinoma including treatment and prognosis. A 4.6-year-old castrated male American Shorthair cat, weighing 5 kg was presented with intermittent vomiting, diarrhea and loss of appetite. Through physical examination and radiography, a cranial abdominal mass was identified. Exploratory laparotomy was carried out. The largest mass was connected to the left lobe of the pancreas, and there were several small, nodular masses scattered along the abdominal lining. The pancreatic mass was removed using an ultrasonic scalpel, and the patient recovered favorably. Histopathologically, the resected lesion was diagnosed as an exocrine pancreatic ductal papillary carcinoma. The patient was maintained with conservative therapy and euthanized on post-operative day 262. Partial pancreatectomy using an ultrasonic scalpel was accomplished safely without evidence of pancreatic leakage.

• 비파괴검사학회지
• /
• 제8권1호
• /
• pp.6-11
• /
• 1988

The comparison and analysis of flaw detectability, flaw sizing methods and allowable criteria in accordance with the applicable codes, ASME and RCC-M Code, in ultrasonic examination of pressure vessel in nuclear power plants were studied. Accordding to the codes, calibration blocks were made. The artificial flaws such as disc and band types in test specimens were machined. They were detected and evaluated with etch code requirements and measured values were compared with the actual flaws.

• 한국압력기기공학회 논문집
• /
• 제4권2호
• /
• pp.46-49
• /
• 2008

NDE(Nondestructive examination) detects a flaw or discontinuity in materials. Flaws detected by the pre-service or in-service examinations shall be sized for the purpose of analysis and repair. A flaw that is initiated from the surface is difficult to determine its depth by NDE. The depth of the surface flaw can be measured using an ultrasonic diffracted wave. To find the optimum standard for ultrasonic parameter(For example, frequency & size of transducer), a mock-up test and simulation were established and studied. This inspection technology may show the depth sizing possibility of the flaw down to nearly two(2) mm.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제26회 춘계학술대회논문집
• /
• pp.11-16
• /
• 2006

본 연구는 이종 접착 재질의 접착계면에서 미접착 결함을 검출하기 위한 새로운 시험 기법을 개발하기 위함이다. 접착계면과 미접착계면에서의 초음파 전달 현상을 이론적으로 해석하여 초음파 신호를 모델링하였고, 이론적 분석에 기초하여 미접착계면에서의 위상 반전 현상을 애용한 검사 방법을 FRP/고무 시편에 적용하였다. 정량적으로 결함의 최소 검출 능력을 평가하기 위하여 알루미늄/고무 시편에 평저공을 가공하여 제작하였고 일반적으로 사용하고 있는 펄스에코반사법과 새로운 시험 기법인 위상반전법을 상호 비교하였으며 이론적으로 예측한 초음파 신호와 실험에서 얻은 초음파 신호를 근거로 위상반전법으로 미접착 결함을 검출할 수 있다고 판단하였다.

• 한국추진공학회지
• /
• 제13권2호
• /
• pp.9-16
• /
• 2009

본 연구는 이종 접착 재질의 접착 계면에서 미접착 결함을 검출하기 위한 새로운 시험 기법을 개발하기 위함이다. 접착 계면과 미접착 계면에서의 초음파 전달 현상을 이론적으로 해석하여 초음파 신호를 모델링하였고, 이론적 분석에 기초하여 미접착 계면에서의 위상 반전 현상을 이용한 검사 방법을 FRP/고무 시편에 적용하였다. 정량적으로 결함의 최소 검출 능력을 평가하기 위하여 알루미늄/고무시편에 평저공을 가공하여 제작하였고 일반적으로 사용하고 있는 펄스에코반사법과 새로운 시험 기법인 위상반전법을 상호 비교하였으며 이론적으로 예측한 초음파 신호와 실험에서 얻은 초음파 신호를 근거로 위상반전법으로 미접착 결함을 검출할 수 있다고 판단하였다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2003년도 춘계학술발표대회 요약집
• /
• pp.305.1-305.1
• /
• 2003

• 한국압력기기공학회 논문집
• /
• 제4권2호
• /
• pp.40-45
• /
• 2008

There exist many types of pipe and component fatigue through vibrations, thermal fatigues or shifting. In some cases of thermal stratification/thermal fatigue, pipes & components are receiving thermal stress by means of material expansion and shrinkage by continuous thermal repetitive variation. Small cracks initially occur on the inside surface by thermal stress. These cracks grow in depth the pipe wall and finally come to a rupture. Pipe parts of susceptibility to thermal stratification and thermal fatigue are now being examined by conventional UT(ultrasonic test) as volumetric examination. It is difficult to fully satisfy the code & standards requirements because 3" weldolet weldments of RCS 16" pipe to 3" branch connection lines have complex structural shape. To solve the problems of conventional UT examination, we made a realistic mock-up and UT calibration block. We performed a simulation of phased array UT utilizing CIVA as NDE(Non-Destructive Examination) simulation software. Also we designed phased array UT transducer and wedge, optimal frequency by using simulation data. We performed phased array UT experiment through mock-up including artificial flaws(notch). The phased array UT technique is finally developed to improve the reliability of ultrasonic test at RCS 16" pipe to 3" branch connection weld.