• 대한기계학회논문집A
• /
• 제20권10호
• /
• pp.3079-3094
• /
• 1996

Recently, the high-precision vibration attenuation technology becomes the essence fo the seccessful development of high-integrated and ultra-precision industries, and is expected to continue playing a key role in the enhancement of manufacturing technology. Vibration isolation system using an air-spring is widely employed owing to its excellent isolation characteristics in a wide frequency range. It has, however, some drawbacks such as low-stiffness and low-damping features and can be easily excited by exogenous disturbances, and then vibration of table is remained for a long time. Consequently, the need for active vibration control for an air-spring vibration isolation system becomes inevitable. Furthermore, for an air-spring isolation table to be successfully employed in a variety of manufacturing sites, it should have a guaranteed robust performance not only to exogenous disturbances but also to uncertainties due to various equipments which might be put on the table. In this study, an active vibration suppression control system using H.inf. theory is designed and experiments are performed to verify its robust performance. An air-spring vibration isolation table with voice-coil-motors as its actuators is designed and built. The table is modeled as 3 degree-of-freedom system. An active control system is designed based on $H_\infty$control theory using frequency-shaped weighting functions. Analysis on its performance and frequency responce properties are done through numerical simulations. Robust characteristics of$H_\infty$ control on disturbances and model uncertainties are experimentally verified through (i) the transient response to the impact excitation of the table, (ii) the steady-state response to the harmonic excitation, and (iii) the response to the mass change of the table itself. An LQG controller is also designed and its performance is compared with the $H_\infty$ controller.

• 천문학회보
• /
• 제42권1호
• /
• pp.39.4-40
• /
• 2017

According to the Korean government's Long-term Space Development Plan 2040, "Creative space science research" is included in a statement to investigate the origin and evolution of the universe by conducting a series of Korean space telescope missions: launch of space telescopes on a small satellite and an international collaboration explorer by 2020, a mid-size domestic space telescope by 2030, and a large size Korea leading international space telescope by 2040. We studied the feasibility of the future Korean Space Telescope (KST) for a mid-size domestic satellite platform. In order to pursue the uniqueness of the science program, we consider a wide range of observing wavelength (0.2um ~ 2.0um) with a spectral resolution of R~6 in the NUV and optical bands, and R~30 for NIR, utilizing an off-axis TMS(Three Mirror System) optics with a wide field of view ($2{\times}4$ degrees) which is optimized for ultra-low surface brightness sources. The main science goals of the mission include investigations of the galaxy formation, cosmic web, and the cosmic background radiation in the NUV-NIR regions. In this paper, we present the science cases and several technical challenges to be resolved along with the future milestones for the success of the KST mission.

• 한국응용과학기술학회지
• /
• 제12권1호
• /
• pp.125-131
• /
• 1995

Ultra thin films of Tetra-3-hexadecylsulphamoylcopperphthalocyanine(HDSM-CuPc) were formed on various substrates by Langmuir-Blodgett method, where HDSM-CuPc was synthesized by attaching long-chain alkylamine(hexa-decylamine) to CuPc. The reaction product was identified with FT-IR, UV-visible absorption spectroscopies, elemental analysis and thin layer chromatography. The formation of Ultrathin Langmuir-Blodgett(LB) films of HDSM-CuPc was confirmed by FT-IR and UV-visible spectroscopies. A quartz piezoelectric crystal coated with LB films of HDSM-CuPc was examined as a gas sensor for $N0_2$ gas. HDSM-CuPc LB films were transferred to a quartz crystal microbalance(QCM) in the form of Z-type multilayers. Response characteristics of film-coated QCM to $NO_2$ gas concentrations over a range of $100{\sim}600ppm$ have been tested with a thickness of $5{\sim}20$ layers of HDSM-CuPc. Changes in frequency by adsorption of $NO_2$ were increased With the number of LB layers and $NO_2$ concentration, but the response time was slow.

• 한국전자파학회논문지
• /
• 제27권11호
• /
• pp.972-977
• /
• 2016

본 논문에서는 920 MHz UHF(Ultra High Frequency) 대역과 13.56 MHz HF(High Frequency) 대역의 RFID 태그 안테나가 PE film에 단면에 프린트된 이중대역 태그를 설계하는 과정과 그 결과를 보여준다. 태그의 전체 크기는 일반 신용카드의 크기인 $80mm{\times}50mm$이고, 가장자리에 UHF 태그 안테나가 $76mm{\times}44mm$로 카드 크기보다 조금 작게 설계되었다. HF 대역 태그는 UHF 태그의 중앙에 $40 mm{\times}42 mm$ 크기로 상호작용을 감안하여 설계되었다. 단면에 실버잉크 Printing 기법으로 일반적인 HF용 태그와 다르게 Via를 사용하지 않고, 단면에 PE Film 위에 프린트를 한 후에 Jumper를 추가함으로써 HF 대역용 Loop 안테나와 UHF 태그와 같은 면에 설계하였다. 인식거리는 UHF 대역에서 약 6 m로 장거리에서 인식이 가능하고, HF 대역에서는 5 cm 이상으로써 두 개의 대역에서 사용이 가능한 태그로서 물류와 검증용으로 사용이 가능하다.

• 전기학회논문지
• /
• 제61권12호
• /
• pp.1892-1897
• /
• 2012

Modern electronic circuits are of importance for the function of communication, traffic systems and security systems. An intentional threat to these systems could be of big casualties and economic disasters. This study has examined susceptibility of electronic circuits inside the cavity by HPEM(High Power Electromagnetics). The UWB measurements were done at an anechoic chamber using a RADAN voltage source, which can generate a transient impulse of about 200 kV. The HPEM wave penetrated inside the metal case appeared to the long damped ringwave of pulse length compared with the incident wave. In addition, the resonant frequency generated inside the metal case occurred primarily in the range of 1~3 GHz. The frequency band of 1~3 GHz was influenced on the electronic circuit, which was confirmed by an external antenna and an internal absorber. The electronic circuit was influenced by HPEM infiltrated into the cavity at the 86 kV/m out of the metal cases. Also in case of an absorber the susceptibility of an electronic circuit was smallest among other cases(aperture, antenna). It is considered that absorber has a function absorbing electromagnetic wave infiltrated into the cavity and simultaneously limiting resonance by varying a boundary condition inside the cavity. Based on the results, electronic equipment systems could be applied to protection that has suited system requirements.

• 한국전기전자재료학회논문지
• /
• 제37권1호
• /
• pp.68-73
• /
• 2024

In this study, the praseodymium-doped yttrium phosphate (YPO₄:Pr³⁺) powder, which is well known for its high luminescent efficiency, and long life in the UV range, was synthesized with various content ratios of Pr₆O₁₁ and calcination temperature. Crystal structure and luminescent properties of various phosphor powders based on different concentrations and calcination conditions were characterized by XRD (X-Ray Diffraction) and PL (photoluminescence) spectrometers. From the XRD analysis, the structure of YPO₄:Pr³⁺ which is calcinated at 1,200℃ was stable tetragonal phase and crystal size was calculated about 25 nm by Scherrer equation. PL emission of YPO₄:Pr³⁺ with a different content ratio of Pr₆O₁₁ by excitation λ_exc=250 nm shows that 0.75 mol% phosphor powder has maximum PL intensity and PL decreases with the increase of the ratio of Pr₆O₁₁ up to 1.25 mol% which is caused by changes of crystallinity of phosphor powders. With increasing dopant ratio, photo-luminescence Emission decreases due to Concentration quenching, which is commonly observed in phosphors. Currently, 0.75 mol% is considered the optimal doping concentration. A hybrid ultraviolet-emitting device incorporating YPO₄:Pr³⁺ fluorescent material with plasma discharge was fabricated to enhance UV germicidal effects while minimizing ozone generation. UV emission from the plasma discharge device was shown at about 200 nm and 350 nm which caused additional emission of the regions of 250 nm, 315 nm, and 370 nm from the YPO₄:Pr³⁺ phosphor.

• Journal of Preventive Medicine and Public Health
• /
• 제57권1호
• /
• pp.55-64
• /
• 2024

Objectives: This study investigated the prevalence and characteristics of comorbid conditions in patients exposed to ionizing radiation and those who were involved in the Soviet-Afghan war. Methods: This study analyzed the frequency and spectrum of morbidity and comorbidity in patients over a long-term period (30-35 years) following exposure to ionizing radiation at the Semipalatinsk nuclear test site or the Chornobyl nuclear power plant, and among participants of the Soviet-Afghan war. A cohort study, both prospective and retrospective, was conducted on 675 patients who underwent comprehensive examinations. Results: Numerical data were analyzed using the Statistica 6 program. The results are presented as the mean±standard deviation, median, and interquartile range (25-75th percentiles). The statistical significance of between-group differences was assessed using the Student t-test and Pearson chi-square test. A p-value of less than 0.05 was considered statistically significant. We found a high prevalence of cardiovascular diseases, including hypertension (55.0%) and cardiac ischemia (32.9%); these rates exceeded the average for this age group in the general population. Conclusions: The cumulative impact of causal occupational, environmental, and ultra-high stress factors in the combat zone in participants of the Soviet-Afghan war, along with common conventional factors, contributed to the formation of a specific comorbidity structure. This necessitates a rational approach to identifying early predictors of cardiovascular events and central nervous system disorders, as well as pathognomonic clinical symptoms in this patient cohort. It also underscores the importance of selecting suitable methods and strategies for implementing treatment and prevention measures.

• 한국산업보건학회지
• /
• 제25권3호
• /
• pp.301-311
• /
• 2015

Objectives: Operators of overhead traveling crane in a ship assembly factory perform work to transmit large vessel blocks to an appropriate working process. Hazardous matters such as metal dusts, carbon monoxide, carbon dioxide, ozone, loud noise and fine particles are generated by variable working activities in the factory. The operators could be exposed to the hazardous matters during the work. In particular, welding fumes comprised of ultra fine particles and heavy metals is extremely hazardous for humans when exposing a pulmonary through respiratory pathway. Occupational lung diseases related to welding fumes are increasingly on an upward tendency. Therefore, the objective of this study is to assess properly unknown occupational exposure to the welding fumes among the operators. Methods: This study intended to clearly determine an equivalence check whether or not chemical constituents and composition of the dusts, which existed in the driver's cab, matched up with generally known welding fumes. Furthermore, computational fluid dynamics program(CFD) was used to identify a ventilation assessment in respect of a contamination distribution of welding fumes in the air. The operators were investigated to assess personal exposure levels of welding fumes and respirable particulate. Results: The dust in an operation room were the same constituents and composition as welding fumes. Welding fumes, which caused by the welding in a floor of the factory, arose with an ascending air current up to a roof and then stayed for a long time. They were considered to be exposed to the welding fumes in the operation room. The personal exposure levels of welding fumes and respirable particulate were 0.159(n=8, range=0.073-0.410) $mg/m^3$ and 0.138(n=8, range=0.087-0.178) $mg/m^3$, respectively. They were lower than a threshold limit value level($5mg/m^3$) of welding fumes. Conclusions: These findings indicate that an occupational exposure to welding fumes can exist among the operators. Consequently, we need to be keeping the operators under a constant assessment in the operator process of overhead traveling crane.

• 한국안광학회지
• /
• 제12권4호
• /
• pp.55-69
• /
• 2007

본 연구는 ez NANOsence II RGP 콘택트렌즈를 사용하여 굴절이상 눈의 피검자에 대한 시력과 각막에 미치는 임상적 검증을 하였다. 피검자는 성인 121명(남성 29인, 여성 92명; 연령은 17세와 43세 사이, 평균 22.86세)을 대상으로 실시하였다. 피검자는 콘택트렌즈 착용 전의 증상을 포함하는 문진을 실시하였고, 또한 콘택트렌즈 착용전후의 눈에 대한 자각과 타각증상 변화도 검진하였다. 시력측정은 콘택트렌즈를 착용하여 원거리에서 실시하였고, 굴절검사는 타각적 방법(Topcon KR-8100, Japan)으로 나안 상태에서 실시하였다. 입체시 검사는 Titmus fly(Stereo Optical Co., U.S.A)와 TNO(Tech, The Netherlands)로서 콘택트렌즈 착용 후 근거리에서 시행하였고, 대비감도 진단은 콘택트렌즈 착용 후 대비감도 챠드(pelli-Robertson, USA)로 1m 거리에서 실시하였다. 각막 지형도검사는 콘택트렌즈 착용 후 나안상태에서 ORB scan(Bausch Lomb, U.S.A.)을 사용하였다. 콘택트렌즈의 표면미세구조는 SEM(JSM-5800, Japan)을 이용해서 관찰하였고, 콘택트렌즈의 화학 성분은 EDS 프로그램을 사용해서 분석하였다. 연구 결과는 다음과 같다. 1. 렌즈의 착용 기간이 길수록 피검자는 대게 개선된 시각기능을 획득했다. 2. 렌즈 착용에 따른 눈의 부작용은 거의 없었다. 3. 피검자의 렌즈 사용은 잘하고 있다. 4. 렌즈 착용기간이 길수록 각막의 굴절 값은 약간 감소하고, 곡률반경은 약간 증가하며, 각막난시는 감소(P<0.01)하고, 각막의 중앙부 두께도 감소하였다. 5. 렌즈 사용 기간이 길수록, 입체시와 대비감도는 더욱 정상 값을 가졌다. 6. 각막지형도 분석에서 대부분 피검자들은 착용기간의 차이에도 비슷한 형태를 나타내었다. 7. 새로운 렌즈와 사용한 콘택트렌즈의 표면미세구조는 미세 형태에서 비슷한 상태이다. 8. 새로운 렌즈와 사용된 콘택트렌즈의 화학적 구성 성분은 거의 같았다. 결론적으로 본 연구는 새로운 것과 사용된 콘택트렌즈의 표면 미세구조와 화학적 구성성분이 유사함을 확인하였다. 또한 렌즈의 장기 착용에도 피검자의 시기능은 개선되고, 눈의 부작용은 적게 나타났으며, 각막난시 값은 감소되었다. 본 검사는 콘택트렌즈 착용자의 시각기능은 콘택트렌즈의 성분과 미세구조가 시각 기능에 관련이 있다고 여겨진다. 본 연구에서 저자들은 ez NANOsence II RGP 콘택트렌즈는 굴절 이상 눈의 교정시력에 좋은 효과가 있다고 추측된다.

• 한국균학회지
• /
• 제41권2호
• /
• pp.104-111
• /
• 2013

장수진흙버섯 자실체에서 메탄올을 이용해 추출한 물질의 폴리페놀 함량을 측정한 결과 4.2 mg/g으로 확인되었다. 장수진흙버섯 추출물의 B16/F10 melanoma와 NIH3T3 세포주에 대한 독성시험에서 이들 공시세포는 $200{\mu}g/mL$ 농도에서 50% 이상 생존하여 세포독성은 없는 것으로 확인되었다. DPPH 전자공여능 시험에서 장수진흙버섯 추출물의 항산화 효과는 농도 의존적으로 나타났으며 양성대조군인 BHT에 비해 우수하였다. 장수진흙버섯 추출물을 B16/F10 melanoma 세포에 150 mg/mL 처리하여 세포내 티로시나아제의 저해능을 조사한 결과, 양성대조군인 arbutin은 31.2%의 저해능을 보인 반면, 같은 농도의 장수진흙버섯 추출물 처리군의 저해능은 46.0%로 나타나 장수진흙버섯 추출물의 티로시나아제의 저해능이 양성대조군 보다 높았다. 또한 장수진흙버섯 메탄올 추출물을 B16/F10 melanoma 세포에 처리하여 멜라닌 생성량을 조사한 결과 $100{\mu}g/mL$ 농도 처리군의 멜라닌 생성량은 대조군의 31.3%로 같은 농도의 arbutin을 처리한 군의 43.9%에 비해 효과가 높았으며, 투여한 추출물의 농도가 증가함에 따라 멜라닌의 생성량은 농도 의존적으로 감소하였다. 또한 장수진흙버섯 메탄올 추출물을 분광광도계를 이용하여 자외선 영역에서의 흡수 스펙트럼을 조사한 결과 270-370 nm의 자외선 파장에서 흡광도가 높아 자외선 차단효과가 우수하였다. 따라서 장수진흙버섯의 메탄올 추출물은 피부미백이나 자외선차단 기능성 화장품으로 개발의 가능성이 높다고 사료되었다.