• 제목/요약/키워드: Ultra-high resolution

검색결과 249건 처리시간 0.034초

디티존 착물 추출과 역상 액체 크로마토그래피를 이용한 물시료 중의 미량 수은 화합물의 농축 및 화학종의 분리 (Preconcentration and Speciation of Trace Mercury Compounds in Water Sample Using Dithizonates Extraction and Reverse Phase Liquid Chromatography)

  • 서정기;조경행;이상학
    • 분석과학
    • /
    • 제13권1호
    • /
    • pp.81-88
    • /
    • 2000
  • 물 중의 미량 수은 화합물을 분리분석하기 위해 초고분자량 폴리에텔렌 막 필터를 이용한 신속 농축방법을 개발하였다. 디티존이 침윤된 폴리에텔렌 막 필터에 시료를 통과시켜 시료 중의 수은을 디티존 착물로서 추출하고, 초음파를 이용해 메탄을 용매상에 회수함으로써 간단하게 농축하였다. 회수된 수은 디티존 착물은 $C_{18}$ 분리관을 이용하여 액체크로마토그래피에 의해 분리하였다. 0.05 M 아세테이트 완충용액(pH 4)과 THF/메탄올(3:5:2)의 혼합액을 이동상으로 사용하여 무기수은과 메틸-, 에틸-, 페닐- 등의 유기수은이 완전 분리되었다. 분리된 수은 착물은 475 nm의 파장에서 검출하였다. 이 방법을 폐수시료에 응용한 결과 ng/mL이하 수준의 검출한계로서 수은 화합물의 분리분석이 가능함을 확인하였다.

  • PDF

무전해 니켈 도금된 탄소나노튜브의 전자파 차폐 특성 (Electromagnetic Interference Shielding Characteristics of Electroless Nickel Plated Carbon Nanotubes)

  • 김도영;윤국진;이영석
    • 공업화학
    • /
    • 제25권3호
    • /
    • pp.268-273
    • /
    • 2014
  • 본 연구에서는 탄소나노튜브의 전자파 차폐 성능을 향상시키고자 무전해 도금법을 이용하여 다중벽 탄소나노튜브에 니켈을 도입하였다. 니켈 도금된 다중벽 탄소나노튜브의 물리적 특성은 고분해능주사전자현미경, 열중량분석기, 표면저항측정기, 전자파 차폐능 분석기를 이용하여 분석하였다. 니켈 도금된 다중벽 탄소나노튜브의 전자파 차폐 효율은 800 MHz 영역에서 16 dB로 측정되었으며 활성화 처리된 다중벽 탄소나노튜브에 비하여 최대 1.6배 증가하였다. 또한, 평균 표면 저항 역시 $70{\Omega}/sq$로 활성화 처리된 다중벽 탄소나노튜브에 비하여 최대 56% 감소한 수치를 나타내었다. 이러한 결과는 니켈 도금 함량에 비하여 표면의 도금 형태가 전자파 차폐 효율에 더 많은 영향을 끼치기 때문인 것으로 판단된다.

홀로그램 압축을 위한 적응적 웨이블릿 변환 (Adaptive Wavelet Transform for Hologram Compression)

  • 김진겸;오관정;김진웅;김동욱;서영호
    • 방송공학회논문지
    • /
    • 제26권2호
    • /
    • pp.143-154
    • /
    • 2021
  • 본 논문에서는 JPEG Pleno에서 제공하는 디지털 홀로그램 표준화 데이터를 압축하는 방법을 제시한다. 디지털 홀로그램의 수치 복원에서 시각화를 위한 랜덤 위상의 추가는 간섭현상으로 인한 스페클 노이즈와 더블어 홀로그램의 압축 효율을 떨어트린다. 홀로그램은 완전 복소의 부동소수점 형태의 데이터로 구성되며 초고해상도와 스페클 노이즈로 인해 홀로그램 특성에 맞춘 압축기술 개발이 필수적이다. 먼저, 다양한 웨이블릿 필터를 이용하여 홀로그램 데이터에 대한 주파수 특성 분석을 진행하여 필터 종류에 따른 에너지 집중도를 분석한다. 두 번째로 에너지 집중도를 이용한 부대역 선택 알고리즘에 대해 소개한다. 마지막으로 JPEG2000의 웨이블릿 필터인 Daubechies 9/7을 이용한 JPEG2000, SPIHT, H.264 결과와 제안하는 방법을 이용하여 압축 및 복원하고 압축률 대비 정량적 화질평가를 통해 그 효율을 분석한다.

Effect of method of synthesis on antifungal ability of ZnO nanoparticles: Chemical route vs green route

  • Patino-Portela, Melissa C.;Arciniegas-Grijalba, Paola A.;Mosquera-Sanchez, Lyda P.;Sierra, Beatriz E. Guerra;Munoz-Florez, Jaime E.;Erazo-Castillo, Luis A.;Rodriguez-Paez, Jorge E.
    • Advances in nano research
    • /
    • 제10권2호
    • /
    • pp.191-210
    • /
    • 2021
  • To compare the antifungal effect of two nanomaterials (NMs), nanoparticles of zinc oxide were synthesized by a chemical route and zinc oxide-based nanobiohybrids were obtained using green synthesis in an extract of garlic (Allium sativum). The techniques of X-Ray Diffraction (XRD), Infrared (IR) and Ultraviolet Visible (UV-Vis) absorption spectroscopies and Scanning (SEM) and Transmission Electron Microscopies (TEM) were used to determine the characteristics of the nanomaterials synthesized. The results showed that the samples obtained were of nanometric size (< 100 nm). To compare their antifungal capacity, their effect on Cercospora sp. was evaluated. Test results showed that both nanomaterials had an antifungal capacity. The nanobiohybrids (green route) gave an inhibition of fungal growth of ~72.4% while with the ZnO-NPs (chemical route), inhibition was ~87.1%. Microstructural studies using High Resolution Optical Microscopy (HROM) and ultra-structural analysis using TEM carried out on the treated strains demonstrated the effect of the nanofungicides on the vegetative and reproductive structures, as well as on their cell wall. To account for the antifungal effect presented by ZnO-NPs and ZnO nanobiohybrids on the fungi tested, effects reported in the literature related to the action of nanomaterials on biological entities were considered. Specifically, we discuss the electrical interaction of the ZnO-NPs with the cell membrane and the biomolecules (proteins) present in the fungi, taking into account the n-type nature of the ZnO semiconductor and the electrical behavior of the fungal cell membrane and that of the proteins that make up the protein crown.

이어도 해양과학기지 관측 수온과 위성 해수면온도 합성장 자료와의 비교 (Comparison of Multi-Satellite Sea Surface Temperatures and In-situ Temperatures from Ieodo Ocean Research Station)

  • 우혜진;박경애;최도영;변도성;정광영;이은일
    • 한국지구과학회지
    • /
    • 제40권6호
    • /
    • pp.613-623
    • /
    • 2019
  • 지난 수십년 동안 인공위성을 통해 광범위하고 주기적으로 관측된 해수면온도 자료를 사용하여 일별 해수면온도 합성장이 생산되고 있으며 기후변화 감시와 해양 대기 예측 등 다양한 목적으로 활용되어 왔다. 본 연구에서는 지역적인 해역에서 최적화된 활용을 위해 한반도 주변해역에서 해수면온도 합성장 자료의 정확도 평가와 오차 특성 분석을 수행하였다. 2016년 1월부터 12월까지 이어도 해양과학기지 관측 수온 자료를 활용하여 4종의 다중 인공위성 기반 해수면온도 합성장 자료(OSTIA (Operational Sea Surface Temperature and Sea Ice Analysis), OISST (Optimum Interpolation Sea Surface Temperature), CMC (Canadian Meteorological Centre) 해수면온도 및 MURSST (Multi-scale Ultra-high Resolution Sea Surface Temperature))를 비교하여 각 해수면온도 합성장의 정확도를 평가하였다. 이어도 해양과학기지 수온 자료에 대하여 각 해수면온도 합성장은 최소 0.12℃ (OISST)와 최대 0.55℃ (MURSST)의 편차와 최소 0.77℃ (CMC 해수면온도)와 최대 0.96℃ (MURSST)의 평균 제곱근 오차를 나타냈다. 해수면온도 합성장 사이의 상호 비교 결과에서는 -0.38-0.38℃의 편차와 0.55-0.82℃의 평균 제곱근 오차의 범위를 보였으며 OSTIA와 CMC 해수면온도 자료가 가장 작은 오차 특성을 보인 반면 OISST와 MURSST 자료는 가장 큰 오차 특성을 나타내었다. 이어도 해양과학기지와 가장 가까운 지점에서 해수면온도 합성장 자료를 추출하여 시계열을 비교한 결과에서는 이어도 해양과학기지 관측 수온 뿐만 아니라 모든 해수면온도 합성장 자료에서 뚜렷한 계절 변동을 보였으나 봄철 해수면온도 합성장은 이어도 해양과학기지 관측 수온에 비해 과대추정되는 경향이 나타났다.

Hexagonal Boron Nitride Monolayer Growth without Aminoborane Nanoparticles by Chemical Vapor Deposition

  • Han, Jaehyu;Yeo, Jong-Souk
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
    • /
    • pp.409-409
    • /
    • 2014
  • Recently hexagonal boron nitride (h-BN), III-V compound of boron and nitrogen with strong covalent $sp^2$ bond, is a 2 dimensional insulating material with a large direct band gap up to 6 eV. Its outstanding properties such as strong mechanical strength, high thermal conductivity, and chemical stability have been reported to be similar or superior to graphene. Because of these excellent properties, h-BN can potentially be used for variety of applications such as dielectric layer, deep UV optoelectronic device, and protective transparent substrate. Ultra flat and charge impurity-free surface of h-BN is also an ideal substrate to maintain electrical properties of 2 dimensional materials such as graphene. To synthesize a single or a few layered h-BN, chemical vapor deposition method (CVD) has been widely used by using an ammonia borane as a precursor. Ammonia borane decomposes into hydrogen (gas), monomeric aminoborane (solid), and borazine (gas) that is used for growing h-BN layer. However, very active monomeric aminoborane forms polymeric aminoborane nanoparticles that are white non-crystalline BN nanoparticles of 50~100 nm in diameter. The presence of these BN nanoparticles following the synthesis has been hampering the implementation of h-BN to various applications. Therefore, it is quite important to grow a clean and high quality h-BN layer free of BN particles without having to introduce complicated process steps. We have demonstrated a synthesis of a high quality h-BN monolayer free of BN nanoparticles in wafer-scale size of $7{\times}7cm^2$ by using CVD method incorporating a simple filter system. The measured results have shown that the filter can effectively remove BN nanoparticles by restricting them from reaching to Cu substrate. Layer thickness of about 0.48 nm measured by AFM, a Raman shift of $1,371{\sim}1,372cm^{-1}$ measured by micro Raman spectroscopy along with optical band gap of 6.06 eV estimated from UV-Vis Spectrophotometer confirm the formation of monolayer h-BN. Quantitative XPS analysis for the ratio of boron and nitrogen and CS-corrected HRTEM image of atomic resolution hexagonal lattices indicate a high quality stoichiometric h-BN. The method presented here provides a promising technique for the synthesis of high quality monolayer h-BN free of BN nanoparticles.

  • PDF

14b 200KS/s $0.87mm^2$ 1.2mW 0.18um CMOS 알고리즈믹 A/D 변환기 (A 14b 200KS/s $0.87mm^2$ 1.2mW 0.18um CMOS Algorithmic A/D Converter)

  • 박용현;이경훈;최희철;이승훈
    • 대한전자공학회논문지SD
    • /
    • 제43권12호
    • /
    • pp.65-73
    • /
    • 2006
  • 본 논문에서는 각종 지능형 센서, control system 및 battery-powered system 응용과 같이 고해상도, 저전력 및 소면적을 동시에 요구하는 시스템을 위한 14b 200KS/s $0.87mm^2$ 1.2mW 0.18um CMOS 알고리즈믹 A/D 변환기 (ADC)를 제안한다. 제안하는 ADC는 요구되는 해상도 및 속도 사양을 만족시키면서, 동시에 면적을 최소화하기 위해 입력단 샘플-앤-홀드 앰프를 전혀 사용하지 않는 알고리즈믹 구조를 채택하였으며, 전체 ADC의 전력소모를 최소화하기 위해 핵심 아날로그 회로 부분에는 향상된 스위치 기반의 바이어스 전력 최소화 기법을 제안하였고, multiplying D/A 변환기에는 클록 선택적인 샘플링 커패시터스위칭 기법을 적용하였다. 또한, 초저전력 온-칩 기준 전류 및 전압 발생기를 제안하여 전체 ADC의 전력소모를 최소화하였다. 제안하는 시제품 ADC는 0.18um 1P6M CMOS 공정으로 제작되었으며, 측정된 DNL 및 INL은 각각 최대 0.98LSB 및 15.72LSB 수준을 보인다. 또한, 200KS/s의 동작 속도에서 SNDR 및 SFDR이 각각 최대 54dB, 69dB이고, 전력 소모는 1.8V 전원 전압에서 1.2mW이며 제작된 ADC의 칩 면적은 $0.87mm^2$이다

유비쿼터스 환경에서의 센서 인터페이스를 위한 12비트 1kS/s 65uA 0.35um CMOS 알고리즈믹 A/D 변환기 (A 12b 1kS/s 65uA 0.35um CMOS Algorithmic ADC for Sensor Interface in Ubiquitous Environments)

  • 이명환;김용우;이승훈
    • 대한전자공학회논문지SD
    • /
    • 제45권3호
    • /
    • pp.69-76
    • /
    • 2008
  • 본 논문에서는 가속도 센서 및 자이로 센서 등과 같이 고해상도 및 작은 면적과 적은 전력 소모를 동시에 요구하는 센서 인터페이스 응용을 위한 12비트 1kS/s 65uA 0.35um CMOS 알고리즈믹 A/D 변환기 (ADC)를 제안한다. 제안하는 ADC는 재순환 기법을 이용한 알고리즈믹 구조를 사용하여 샘플링 속도, 해상도, 전력 소모 및 면적을 최적화하였으며, 일반적인 열린 루프 샘플링 기법을 적용한 버전1과 오프셋 및 플리커 잡음을 제거하여 동적 성능을 향상시키기 위해 닫힌 루프 샘플링 기법을 적용한 버전2로 각각 제작되었다. 또한 SHA와 MDAC 회로에는 스위치 기반의 전력 최소화 기법과 바이어스 공유 기법이 적용된 2단 증폭기를 사용하여 면적과 전력 소모를 최소화시켰다. 한편, 저전력, 소면적 구현을 위한 개선된 기준 전류 및 전압 발생기를 온-칩으로 집적하였으며, 시스템 응용에 파라 선택적으로 다른 크기의 기준 전압 값을 외부에서 인가할 수 있도록 하였다. 제안하는 시제품 ADC는 0.35um 2P4M CMOS 공정으로 제작되었으며, 측정된 DNL 및 INL은 12비트 해상도에서 각각 최대 0.78LSB, 2.24LSB의 수준을 보이며, 동적 성능으로는 1kS/s의 동작 속도에서 버전1, 버전2 각각 최대 60dB, 63dB 수준의 SNDR과 70dB, 75dB 수준의 SFDR을 보여준다. 시제품 ADC의 칩 면적은 버전1, 버전2 각각 $0.78mm^2,\;0.81mm^2$ 이며 전력 소모는 2.5V 전원 전압과 1kS/s의 동작 속도에서 각각 0.163mW, 0.176mw이다.

Ex vivo High-resolution Optical Coherence Tomography (OCT) Imaging of Pleural Reaction after Pleurodesis Using Talc

  • Ahn, Yeh-Chan;Oak, Chulho;Park, Jung-Eun;Jung, Min-Jung;Kim, Jae-Hun;Lee, Hae-Young;Kim, Sung Won;Park, Eun-Kee;Jung, Maan Hong
    • Journal of the Optical Society of Korea
    • /
    • 제20권5호
    • /
    • pp.607-613
    • /
    • 2016
  • The pleura is known as an end target organ of exposure to toxic environmental materials such as fine particulate matter and asbestos. Moreover, long-term exposure to hazardous materials can eventually lead to fatal lung disease such as diffuse pleural fibrosis or mesothelioma. Chest computed tomography (CT) and ultrasound are gold standard imaging modalities for detection of advanced pleural disease. However, a diagnostic tool for early detection of pleural reaction has not been developed yet due to difficulties in imaging ultra-fine structure of the pleura. Optical coherence tomography (OCT), which provides cross-sectional images of micro tissue structures at a resolution of 2-10 μm, can image the mesothelium with a thickness of ~100 μm and therefore enables investigation of the early pleural reaction. In this study, we induced the early pleural reaction according to a time sequence after pleurodesis using talc, which has been widely used in the clinical field. The pleural reaction in talc grouped according to the time sequence (1st, 2nd, 4th weeks) showed a significant thickening (average thickness: 45 ± 7.5 μm, 80 ± 10.7 μm, 90 ± 12.5 μm), while the pleural reaction in sham and normal groups showed pleural change from normal to minimal thickening (average thickness: 16 ± 5.5 μm, 17 ± 4.5 μm, 15 ± 6.5 μm, and 12 ± 7.5 μm, 13 ± 2.5 μm, 12 ± 3.5 μm). The measurement of pleural reaction by pathologic examinations was well-matched with the measurement by OCT images. This is the first study for measuring the thickness of pleural reactions using a biophotonic modality such as OCT. Our results showed that OCT can be useful for evaluating the early pleural reaction.

Extragalactic Sciences from SPICA/FPC-S

  • 정웅섭;;임명신;이형목;이정은;;;;이대희;표정현;박성준;문봉곤;박귀종;박영식;한원용;남욱원
    • 천문학회보
    • /
    • 제38권1호
    • /
    • pp.36.2-36.2
    • /
    • 2013
  • The SPICA (SPace Infrared Telescope for Cosmology & Astrophysics) project is a next-generation infrared space telescope optimized for mid- and far-infrared observation with a cryogenically cooled 3m-class telescope. The focal plane instruments onboard SPICA will enable us to resolve many astronomical key issues from the formation and evolution of galaxies to the planetary formation. The FPC-S (Focal Plane Camera - Sciecne) is a near-infrared instrument proposed by Korea as an international collaboration. Owing to the capability of both low-resolution imaging spectroscopy and wide-band imaging with a field of view of $5^{\prime}{\times}5^{\prime}$, it has large throughput as well as high sensitivity for diffuse light compared with JWST. In order to strengthen advantages of the FPC-S, we propose the studies of probing population III stars by the measurement of cosmic near-infrared background radiation and the star formation history at high redshift by the discoveries of active star-forming galaxies. In addition to the major scientific targets, to survey large area opens a new parameter space to investigate the deep Universe. The good survey capability in the parallel imaging mode allows us to study the rare, bright objects such as quasars, bright star-forming galaxies in the early Universe as a way to understand the formation of the first objects in the Universe, and ultra-cool brown dwarfs. Observations in the warm mission will give us a unique chance to detect high-z supernovae, ices in young stellar objects (YSOs) even with low mass, the $3.3{\mu}$ feature of shocked circumstance in supernova remnants. Here, we report the current status of SPICA/FPC project and its extragalactic sciences.

  • PDF