• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.8
• /
• pp.784-789
• /
• 2011

In this paper, a tunable integrated transmitter leakage canceller based on an autotransformer for ultra-high-frequency (UHF) RFID readers is presented. The proposed TX leakage canceller consists of an autotransformer, a digital tuning capacitor, a voltage controlled tuning resistor, and a compensating amplifier, and it is designed using 0.13 ${\mu}m$ 1-poly 6-metal RF CMOS process. The simulation results show that the proposed structure has over 55 dB rejection characteristic between a transmitter and a receiver and a 2.5 dB of the RX insertion loss. The TX leakage canceller can be digitally tuned from 825 MHz to 985 MHz with the tuning capacitor and it can be fully integrated.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.6
• /
• pp.82-86
• /
• 2001

In this Paper, we Propose synthetic aperture technique for twin-line may. Sin91e-line way is required long aperture size in order to achieve high SNR and angular resolution in shallow water Ultra low frequency signal from far-field has left-right ambiguity at sing1e-line array. To resolve these Problems, we'd like to adopt the synthetic aperture technique to twin-line array. The synthetic aperture method adopts coherent processing of sub-aperture signals at successive tine intervals in the beam domain. The proposed method shows low nile error and improved angular resolution. In simulation result, average sidelobe level is reduced about 7〔dB〕when the array Peformed 5-synthesis.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.9
• /
• pp.819-825
• /
• 2007

Vibration characteristics of an duel-cooling cylindrical fuel rod, which was proposed as a candidate design of fuel's cross section for the ultra-high burnup nuclear fuel, according to the cross-sectional dimensions and the number of supports or the span length were analytically studied. Finite element(FE) modeling for the annular cross sectional fuel was based on the methodology, that have been proven by the test verification, for the conventional PWR nuclear fuel rod. A commercial FEA code, ABAQUS, was used for the FE modeling and analysis. A planar beam element (B21) that uses a linear interpolation was used for the fuel rod and a linear spring element for the spring and dimple of the SG. Natural frequencies and mode shape were calculated according to the preliminary design candidates for the fuel's cross sectional dimension and the number of span. From the analysis results, the design scheme of the annular fuel compatible to the present PWR nuclear reactor core was discussed in terms of the number of supports and fuel's cross section.

• Journal of the Korean Society for Heat Treatment
• /
• v.14 no.5
• /
• pp.292-296
• /
• 2001

In this work, an ultra-high vacuum activated reactive evaporation equipment was built. With reaction of Al and oxygen plasma, $Al_2O_3$ was deposited on the surface of etched Al foil. The chamber was evacuated down to $2{\times}10^{-7}$ torr initially. The Ar and $O_2$ gas introduced into the chamber to maintain $5{\times}10^{-5}$ torr during deposition. Ar gas prevents recombining of the ionized oxygen. Evaporation was maintained by electron beam evaporator continuously. Heating filament and electrode were used in order to generate plasma. The substrate bias of -300V was introduced to accelerate deposition of evaporated Al atoms. The composition and morphology of deposited $Al_2O_3$ films were analyzed by x-ray photoelectron spectroscopy(XPS) and atomic force microscopy (AFM), respectively. The Al oxide was formed on the surface of etched Al foil. According to AFM results, the surface morphology of $Al_2O_3$ film indicates uniform feature. Dielectric characteristic was measured as a function of frequency. Measured withstanding voltage and capacitance were 52V and $24{\mu}F/cm^2$, respectively. The obtained $Al_2O_3$ film shows clean condition without contaminants, which could be adapted to capacitor production.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.228-231
• /
• 2002

In this paper, we estimated the insulation properties of cross-linked polyethylene (XLPE) for ultra-high voltage cable. we have studied the dielectric characteristics of XLPE due to frequency and temperature variation. The dielectric characteristics were measured in the temperature range from $25[^{\circ}C]$ to $120[{^{\circ}C]}$. Also we measured in the voltage range of 1[V] to 20[V] according to the step voltage application method. From FT-IR spectrum as an analysis of physical properties, a strong absorption in wavenumbers 700 to $730[cm^{-1}]$, $1456[cm^{-1}]$ and 2700 to $3000[cm^{-1}]$ observed by the methyl groups$(CH_{2})$. From the analysis of DSC, the crystalline melting points of the specimen observed in the temperature $60[^{\circ}C]$ and $106.58[^{\circ}C]$.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.2
• /
• pp.71-77
• /
• 2015

Upcoming ground-breaking applications for always-on tiny interconnected devices steadily demand two-fold features of processor cores: aggressively low power consumption and enhanced performance. We propose implementation of a novel superscalar low-power processor core with a low supply voltage. The core implements intra-core low-power microarchitecture with minimal performance degradation in instruction fetch, branch prediction, scheduling, and execution units. The inter-core lockstep not only detects malfunctions during low-voltage operation but also carries out software-based recovery. The chip incorporates a pair of cores, high-speed memory, and peripheral interfaces to be implemented with a 65nm node. The processor core consumes only 24mW at 350MHz and 0.68V, resulting in power efficiency of $80{\mu}W/MHz$. The operating frequency of the core reaches 850MHz at 1.2V.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.3
• /
• pp.509-516
• /
• 2011

In this paper, a ground penetrating radar(GPR) system is implemented for landmine detection. The performance of the GPR system is associated with the characteristics of local soil and buried target. The choice of the center frequency and the bandwidth of the GPR system are the key factors in the GPR system design. To detect a small and shallow target, the higher frequencies are needed for high depth resolution. We have been designed, fabricated and tested a new impulse generator using step recovery diodes. The measured impulse response has an amplitude of 6.2V and a pulse width of 250ps. The implemented GPR system has been tested real environmental conditions and has proved its ability to detect a small buried target.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.12
• /
• pp.2147-2152
• /
• 2008

This paper proposes an algorithm to estimate the circulating currents in the transformers in parallel in an ultra high voltage system. For the Y-Y-${\Delta}$ transformers operated in parallel, there exist two kinds of the circulating currents i.e. one is between the tanks and the other between the banks of the delta side. As the former is 90 deg out of phase of the load current, it is estimated by decomposing the line current into the component 90 deg out of phase of the load current in the frequency domain. The latter is estimated in the time domain from applying the Kirchhoff's voltage law on the delta winding which gives a first-order differential equation in terms of the delta winding currents. To estimate the circulating currents between the tanks, the performance of the proposed algorithm is investigated when the impedances of the two transformer tanks are different or the taps of the on-load tap changer of the transformers are mismatched temporarily. To estimate the circulating currents between the banks, the performance of the proposed algorithm is also examined under magnetic inrush and over-excitation. Test results indicate that the algorithm can estimate the two kinds of the circulating currents successfully.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1A
• /
• pp.1-12
• /
• 2002

Ultra Wideband (UWB) system uses wide band signal, which power spectral density likes as a noise floor, so UWB system can be used high speed communication without interfering with other communication system. As this system doesn't use radio frequency carrier. Its structure would be very simple and consume very low power. For the first time, we adopted Rayleigh monopulse multiple access system. And under the AWGN, we analysis and compare error probability, the number of user and data rate of the two methods that pulse position modulation and antipodal. In the result, We concluded that the antipodal method had much better probability of error, the number of user and data rate than PPM.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2000.09a
• /
• pp.473-479
• /
• 2000

The nanocrystalline Fe$_{84}$Zr$_{7}$B$_{6}$Cu$_{1}$ $Al_{2}$ alloy was annealed at 450 $^{\circ}C$ and 550 $^{\circ}C$ for l hour to achieve the ultra-soft magnetic properties such as large magnetoimpedence ratio(MIR), the incremental permeability ratio(PR), nearly zero coercivity, zero magnetostriction, etc. The PR and MIR of the sample were measured from 100 kHz to 10 MHz at a cryogenic chamber where the temperature can be varie from 10 K to 300 K. The increment of MIR value is proportional to increasing temperature. The maximum PR values measured at high frequency above 1 MHz remain almost same despite of the temperature variation from 10 K to 300 K except the sharpness in PR curves. However, the maximum PR values measured below 1 MHz show drastic increment at above 150K due to thermal activation of magnetic domains.s.s.