• Journal of Information Display
• /
• v.5 no.4
• /
• pp.12-17
• /
• 2004

A series of statistical random copolymers of dioctylfluorene (DOF) and 3,4-ethylenedioxythiophene (EDOT) were synthesized by Ni (0) mediated polymerization and their light-emitting properties were compared with poly (9,9-di-n-octylfluorene) (PDOF). The synthesized polymers were characterized using UV-vis spectroscopy, TGA, photoluminescence (PL) & electroluminescence (EL) spectroscopy and by conducting molecular weight studies. The resulting polymers were found to be thermally stable and readily soluble in organic solvents. The UV-visible absorption and PL emission spectra of the copolymers were gradually red-shifted as the fraction of EDOT in copolymers increased. Light-emitting devices were fabricated in an ITO (indium-tin oxide)/PEDOT/polymer/Ca/Al configuration. Interestingly, the EL spectra of these devices were similar to the PL spectra of the corresponding polymer film. However, the EL devices constructed from the copolymer showed more than 10 times higher efficiency level than the devices constructed from the PDOF homopolymer. This higher efficiency is possibly the result of better charge carrier balance in the copolymer systems due to the lower HOMO levels of the copolymers in comparison to that of PDOF homopolymer.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.12
• /
• pp.1757-1763
• /
• 2004

A new series of nickel(II), cobalt(II)/(III) and copper(II) complexes of 14, 15 and 16-membered of macrocyclic ligands have been prepared and characterized by elemental analyses, IR, UV-VIS and $^1H-NMR$ spectra, magnetic susceptibilities, conductivities, DTA and ESR measurements. Molar conductances in DMF solution indicate that, the complexes are nonelectrolytes except (9-12) complexes. The electronic spectra show that, all complexes are square planar or distorted octahedral geometry. The ESR spectra of solid complexes (4), (8) and (11) show square planar of axial type symmetry $(d_{x2-y2})$ with considerable covalent bond character. However, complex (12) shows a spectrum of octahedral geometry with $d_{z2}$ ground state. Complex (12) shows exploitation in reducing the amount of electron adducts formed in DNA during irradiation with low radiation products.

• Korean Journal of Food Science and Technology
• /
• v.32 no.6
• /
• pp.1437-1441
• /
• 2000

Acycloretinoic acid was prepared from acycloretinal by oxidation with Tollens reagent. Acycloretinoic acid was separated with Silica-HPLC and analyzed by ODS-HPLC with a photodiode array detector and by GC-MS. Lycopene was solubilized in toluene and aqueous Tween 40, and then oxidized by incubating at $37^{\circ}C$ under atmospheric oxygen. Acidic compound was produced by autoxidation of lycopene. Retention time, UV-Vis spectra and mass spectra of the acidic compound were identical to the standard acycloretinoic acid. Thus, acycloretinoic acid was confirmed to occur in vitro under oxidation condition of lycopene.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.7
• /
• pp.1875-1880
• /
• 2010

A dicycle pyrazoline derivative, 1-phenyl-5-(p-fluorophenyl)-3,4-($\alpha$-p-fluoro-tolylenecyclohexano) pyrazoline, was synthesized and characterized by elemental analysis, IR, UV-vis, fluorescence spectra and X-ray single crystal diffraction. Density function theory (DFT) calculations were performed by using B3LYP method with 6-$311G^{**}$ basis set. The optimized geometry can well simulate the molecular structure. Vibrational frequencies were predicted, assigned and compared with the experimental values, which suggest that B3LYP/6-$311G^{**}$ method can well predict the IR spectra. Both the experimental electronic absorption spectra and the predicted ones by B3LYP/6-$311G^{**}$ method reveal three electron-transition bands, with the theoretical ones having some red shifts compared with the experimental data. Natural bond orbital analyses indicate that the absorption bands are mainly derived from the contribution of n $\rightarrow\pi^*$ and $\pi\rightarrow\pi^*$ transitions. Fluorescence spectra determination shows that the title compound can emit blue-light at about 478 nm. On the basis of vibrational analysis, the thermodynamic properties of title compound at different temperature have been calculated, revealing the correlations between $C^0_{p,m}$, $S^0_m$, $H^0_m$ and temperature.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.11
• /
• pp.3767-3771
• /
• 2012

In this study, we investigate the potential use of $TiO_2@SiO_2$ and $ZnO@SiO_2$ core/shell nanoparticles (NPs) as effective UV shielding agent. In the typical synthesis, $SiO_2$ was coated over different types of $TiO_2$ (anatase and rutile) and ZnO by sol-gel method. The synthesized $TiO_2@SiO_2$ and $ZnO@SiO_2$ NPs were characterized by UV-Vis, XRD, SEM and TEM. The UV-vis absorbance and transmittance spectra of core@shell NPs showed an efficient blocking effect in the UV region and more than 90% transmittance in the visible region. XRD and SAED studies confirmed the formation of amorphous $SiO_2$ coated over the $TiO_2$ and ZnO NPs. The FESEM and TEM images shows that coating of $SiO_2$ over the surface of anatase, rutile $TiO_2$ and ZnO NPs resulted in the increase in particle size by ~30 nm. In order to study the UV light shielding capability of the samples, photocatalytic degradation of methylene blue dye on $TiO_2@SiO_2$ and $ZnO@SiO_2$ NPs was performed. Photocatalytic activity for both types of $TiO_2$ NPs was partially suppressed. In comparison, the photocatalytic activity of ZnO almost vanished after the $SiO_2$ coating.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.12
• /
• pp.3867-3870
• /
• 2013

• Textile Coloration and Finishing
• /
• v.12 no.5
• /
• pp.288-294
• /
• 2000

The dyeing of Tencel fabric with Coptis chinensis Franch was studied. The colorant was extracted with distilled water under various concentrations of dyestuff, times, mordants. UV-VIS spectra were obtained to find the maximum wavelength and absorbance of colorant. Tencel fabric was dyed with different mordants in pre and post-mordanting methods. Maximum wavelength of spectrum was 343 nm, and K/S value of pre-mordant was higher than post-mordant. Aluminium and stannic mordants changed color from yellow to blue-greenish and red-bluish. Colorfastnesses of light, and washing were low grade, but that of perspiration was increased.

• Textile Coloration and Finishing
• /
• v.21 no.5
• /
• pp.51-57
• /
• 2009

Since heavy metal pollution is a significant global environmental problem and very dangerous to human health, the improved methods for detecting heavy metals are required recently. Colorimetric chemosensors are now considered as one of the most effective analytical method used in the environment monitoring. New direct dyes having the function of colorimetric chemosensors were synthesized. When metal ions such as $Al^{3+}$, $Ca^{2+}$, $Cd^{2+}$, $Cr^{3+}$, $Cu^{2+}$, $Fe^{2+}$, $Fe^{3+}$, $Hg^{2+}$, $Li^+$, $Mg^{2+}$, $Na^+$, $Ni^{2+}$, $Pb^{2+}$ and $Zn^{2+}$ were added each solution of new direct dyes, the color of solution was changed and can be easily detected with naked eyes without expensive experimental equipment such as atomic absorption spectrometer (AAS) or inductively coupled plasma?mass spectrometer (ICP-MS). The new benzidine analogues were diazotized and reacted with couplers such as H-acid, J-acid, Chromotropic acid, Nevill-winther acid and gamma acid to synthesize new direct dyes. The structures of the new direct dyes were confirmed by high resolution mass spectrometer (FAB ionization) and evaluated with UV-Vis spectroscopy. The UV-VIS spectroscopy was measured for the dye solutions by adding various concentrations of metal ions. It was observed that the absorbance in UV-Vis spectra was changed as the heavy metal ions were added.

• Applied Chemistry for Engineering
• /
• v.24 no.1
• /
• pp.93-98
• /
• 2013

In this paper, four conducting polymers (poly[(N-butyl-phenothiazine)-sulfide] (PBPS), poly[(N-hexyl-phenothiazine)-sulfide] (PHPS), poly[(N-decyl-phenothiazine)-sulfide] (PDPS), and poly[(N-(2-ethylhexyl)-phenothiazine)-sulfide] (PEHPS)) were synthesized with a high temperature and high pressure reaction. The structures of synthesized polymers were confirmed by $^1H-NMR$ and characterized by UV-Vis, cyclic voltammetry, and GPC. From the UV-Vis absorption spectra, the ${\lambda}_{max}$ values of PBPS, PHPS, PDPS, and PEHPS were 338, 341, 340, and 334 nm, respectively and their optical band gaps were 3.11, 3.13, 3.16, and 3.05 eV, respectively. To evaluate the feasible applicability as a photovoltaic cell, the devices composed of for example, ITO/PEDOT : PSS/polymer (PBPS, PDPS) : $PC_{71}BM$ (1 : 3, w/w)/$BaF_2$/Ba/Al were fabricated using the blends of the PBPS and PDPS as a donor, and $PC_{71}BM$ as an acceptor. Then, the power conversion efficiencies (PCE) of devices were estimated as 0.076% of PBPS and 0.136% of PDPS by solar simulator.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.3
• /
• pp.437-448
• /
• 1997

The substitution of vanadium atoms into the zeolite framework structure could be applied to the large pore zeolites by means of modified treatments as well as direct hydrothermal synthesis. The incorporation of V into the zeolite framework was demonstrated by instrumental analysis techniques. The result of X-ray diffraction analysis showed that the unit cell parameters increased after incorporation of vanadium into the zeolitic lattice, indicating that the replacement of Si by the larger V atoms could cause a slight expansion in the unit cell. In addition, the results of FTIR, Uv-Vis and Si-MAS-NMR spectra strongly support the incorporation of V into the zeolite framework. Acid leaching of aluminum in zeolites can provide a vacant position in the lattice for the insertion of vansdium by secondary hydrothermal treatment.