• 한국재료학회지
• /
• 제28권4호
• /
• pp.221-226
• /
• 2018

The property changes of 18, 14, and 8K green gold alloys for jewelry are observed by adding 0.0, 3.0, and 5.0 wt% of indium (In), respectively. To check the composition of the alloys, an energy dispersive spectroscopy (EDS) analysis is conducted. Color and microstructure analysis is executed through bare-eye, macro camera, UV-VIS-NIR-colormeter, and optical microscope. The melting point, wetting angle, and hardness are measured using TGA-DTA, a wetting angle tester, and a Vickers hardness tester. The EDS analysis result demonstrates that each of the green gold alloys was manufactured with purposed contents. The color analysis result shows that the color of the alloys is similar to the color of the conventional 4 wt%-Cd 18K green gold, and the green color improves as the In content increases. The micro structure analysis result demonstrates that grain refinement improves as the amount of In increases. Enhancements in the melting point, wettability, and Vickers hardness changes appear as the In content increases and Au content decreases. The hardness is up to 260, which implies good durability. Therefore, the results suggest that the proposed 18, 14, and 8K In-added green gold alloys enhance the properties of jewelry products with regard to the green color, castability, and durability.

• 한국전기전자재료학회논문지
• /
• 제22권7호
• /
• pp.567-571
• /
• 2009

Polycrystalline ZnO and Ga doped ZnO (GZO) films are deposited on glass substrate by RF magnetron sputtering at room temperature. The characteristics of ZnO and GZO films are investigated with X-ray diffraction measurement, UV-VIS-NIR spectrophotometer $(250{\sim}1200nm)$ and hall measurement. The post-growth thermal treatment of these films is carried out in N2 ambient at $500^{\circ}C$ for 30 min and an hour. ZnO and GZO films have different changing behavior of structural and optical properties by annealing. To use transparent conductive films for solar cell, films should have not only high transmittance but also good electrical property. Although as deposited GZO films have electrical properties than ZnO films, GZO films have not good transmittance properties. Consequently, we succeed that the high transmittance of GZO films is improved by annealing process.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.316-316
• /
• 2013

실리콘(Si)은 이미지 센서, 포토검출기, 태양전지등 반도체 광전소자 분야에서 널리 사용되고 있는 대표적인 물질이다. 이러한 소자들은 광추출 또는 광흡수 효율을 향상시키는 것이 매우 중요하다. 그러나 Si의 높은 굴절율은 표면에서 30% 이상의 반사율을 발생시켜 소자의 성능을 저하시킨다. 따라서, 표면에서의 광학적 손실을 줄이기 위한 효과적인 무반사 코팅이 필요하다. 최근, 우수한 내구성과 광대역 파장 및 다방향성에서 무반사 특성을 보이는 서브파장 주기를 갖는 나노격자(subwavelength grating, SWG) 구조의 형성 및 제작에 관한 연구가 활발히 진행되고 있다. 이러한 구조는 경사 굴절율 분포를 가지는 유효 매질을 형성시킴으로써 Fresnel 반사율을 감소시킬 수 있어 반도체 소자 표면에서의 광손실을 줄일 수 있다. 그러나, SWG나노구조는 식각에 의한 표면 결함(defects)들이 발생하게 된다. 이러한 결함은 표면에서의 재결합 손실을 발생시켜 소자의 성능을 크게 저하시킨다. 이러한 문제를 해결하기 위해, 표면 보호막 및 무반사 코팅 층을 목적으로 하는 산화막을 표면에 형성시키기도 한다. 따라서 본 실험에서는 레이저간섭리소그라피 및 건식 식각을 이용하여 Si 기판에 SWG 나노구조를 형성하였고, 제작된 샘플 표면 위에 실리콘 산화막(SiOx)을 furnace를 이용하여 형성시켰다. 제작된 샘플들의 표면 및 식각 profile은 scanning electron microscope를 사용하여 관찰하였으며, UV-vis-NIR spectrophotometer 를 사용하여 빛의 입사각에 따른 반사율을 측정하였고, 표면 접촉각 측정 장비를 이용하여 표면 wettability를 조사하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제16권5호
• /
• pp.280-284
• /
• 2015

Among many the oxynitrides, TiNO and AlCrNO, have diverse applications in different technological fields. We prepared TiNO/AlCrNO/Al thin films on aluminum substrates using the method of dc reactive magnetron sputtering. The reactive gas flow, gas mixture, and target potential were applied as the sputtering conditions during the deposition in order to control the chemical composition. The multi-layer films have been prepared in an Ar and O₂+N₂ gas mixture rate. The surface properties were estimated by performing scanning electron microscopy (SEM). At a wavelength range of 0.3~2.5 μm, the exact composition and optical properties of thin films were measured by Auger electron spectroscopy (AES) and Ultraviolet-visible-near infrared (UV-Vis-NIR) spectrophotometry. The optimal absorptance of multi-layer films was exhibited above 95.5% in the visible region of the electromagnetic spectrum, and the reflectance was achieved below 1.89%.

• Transactions on Electrical and Electronic Materials
• /
• 제16권5호
• /
• pp.264-267
• /
• 2015

AlCrNO cermet films were prepared on aluminum substrates using a DC-reactive magnetron sputtering method and a water-cooled Al:Cr target. The Al₂O₃/AlCrNO (LMVF)/AlCrNO (MMVF)/AlCrNO (HMVF)/Al/substrate of the 5 multi-layers was prepared according to the Ar and (N₂ + O₂) gas-mixture rates. The Al₂O₃ of the top layer is the anti-reflection layer of triple AlCrNO (LMVF)/AlCrNO (MMVF)/AlCrNO (HMVF) layers, and an Al metal forms the infrared reflection layer. In this study, the crystallinity and surface properties of the AlCrNO thin films were estimated using X-ray diffraction (XRD) and field-emission scanning electron microscopy (FESEM), while the composition of the thin films was systematically investigated using Auger electron spectroscopy (AES). The optical properties of the wavelength spectrum were recorded using UH4150 spectrophotometry (UV-Vis-NIR) at a range of 0.3 μm to 2.5 μm.

• 한국재료학회지
• /
• 제29권12호
• /
• pp.764-773
• /
• 2019

The gas response characteristic toward C₂H₅OH has been demonstrated in terms of copper-vacancy concentration, hole density, and microstructural factors for undoped/Li(I)-doped CuO thin films prepared by sol-gel method. For the films, both concentrations of intrinsic copper vacancies and electronic holes decrease with increasing calcination temperature from 400 to 500 to 600 ℃. Li(I) doping into CuO leads to the reduction of copper-vacancy concentration and the enhancement of hole density. The increase of calcination temperature or Li(I) doping concentration in the film increases both optical band gap energy and Cu2p binding energy, which are characterized by UV-vis-NIR and X-ray photoelectron spectroscopy, respectively. The overall hole density of the film is determined by the offset effect of intrinsic and extrinsic hole densities, which depend on the calcination temperature and the Li(I) doping amount, respectively. The apparent resistance of the film is determined by the concentration of the structural defects such as copper vacancies, Li(I) dopants, and grain boundaries, as well as by the hole density. As a result, it is found that the gas response value of the film sensor is directly proportional to the apparent sensor resistance.

• 대한치과기공학회지
• /
• 제36권3호
• /
• pp.179-184
• /
• 2014

Purpose: This study was performed to investigate the release behavior of bioactive materials as a BMP-2 embedding on the porous titanium implant. Methods: Porous Ti implant samples were fabricated by sintering of spherical Ti powders in a high vacuum furnace. Specimens diameter and height were 4mm and 10mm. Embedding materials were used to stamp ink. Sectional images, porosity and release behavior of porous Ti implants were evaluated by scanning electron microscope(SEM), mercury porosimeter and UV-Vis-NIR spectrophotometer. Results: Internal pore structure was formed fully open pore. Average pore size and porosity were $8.993{\mu}m$ and 8.918%. Embedding materials were released continually and slowly. Conclusion: Porous Ti implant was fabricated successfully by sintering method. Particles are necking strongly each other and others portions were vacancy. Therefore bioactive materials will be able to embedding to porous Ti implants. If the development of the fusion implant of the bioactive material will be able to have the chance to several patients.

• 한국전기전자재료학회논문지
• /
• 제14권2호
• /
• pp.145-151
• /
• 2001

In this study, blue light emiting, soluble PPV copolymers were synthesized by Witting reaction and characterized. ITO/copolymer/Ca and ITO/copolymer/A1 structured light emitting diodes(LED) were fabricated and their I-V characteristics were examined. Copolymers showed $\pi$-$\pi$ transition in UV-Vis./NIR spectra. The PL and abosorption spectrum showed the symmetric vibration modes with mirror images which means that copolymers are highly aligned. By introducing aliphatic hydrocarbon group on polymer main chain, the solubility of copolymers was improved and no significant effects of substituent were observed. The band offset of copolymers are well suited as light emitting material for LED application than monomer or oligomer does. THe band offset of copolymers is ∼3eV in PL spectrum and the threshold voltages of ITO/copolymer/Ca and ITO/copolymer/Al structured LED 3V, 12V respectively. In the case of ITO/copolymer/Ca LED, it is believed that the amount of electrons and holes is well balanced and the recombination of opposite charges occurs easily because the work functions of Ca and Al electrodes are 2.9 and 4.3eV respectively and the difference in barrier height between polymer and electrode was small.

• 한국전기전자재료학회논문지
• /
• 제23권4호
• /
• pp.261-266
• /
• 2010

In this paper, we report the changes of electrical, structural and optical characteristics in $Ge_2Sb_2Te_5$ thin films according to an increase of Si content. The Si-doped $Ge_2Sb_2Te_5$ thin films were prepared by rf-magnetron co-sputtering method. Isothermal annealing was carried out at $N_2$ atmosphere. The crystallization speed (v) of amorphous thin films was evaluated by detecting the reflection response signals using a nano-pulse scanner (wavelength = 658 nm) with illumination power of 1~17 mW and pulse duration of 10~460 ns. Structural phase changes were evaluated by XRD, and the optical transmittance was measured in the wavelength range of 300~3000 nm using UV-vis-NIR spectrophotometer. The sheet resistance (RS) of the thin films was measured using 4 point probe. Conclusivlely, the v-value decreased with an increase of Si content, while the RS-values of both crystalline and amorphous phases were increased. In particular, fcc-to-hexagonal transition was suppressed by the added Si atoms.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.305-306
• /
• 2008

본 논문에서는 PRAM 에서 기록매질로 이용될 수 있는 최적의 물질을 찾고자 $Ge_2Sb_2Te_5$ 박막에 Al을 첨가하여 비정질-결정질 천이시의 원자구조와 상변화 특성간의 관계를 연구하였다. 이 실험에 사용된 $Al_x(Ge_2Sb_2Te_5)_{1-x}$ 조성은 5N의 금속 파우더를 용융-냉각법으로 벌크를 제작하였고 열증착 방법으로 Si (100) 및 유리 (corning glass, 7059) 기판위에 200nm 두께로 박막을 증착하였다. 비정질 박막의 상변화에 따른 반사도 차이를 평가하기 위해서 658 nm의 LD가 장착된 나노펄스 스캐너를 이용하여 power; 1~17mW, pulse duration; 10~460 ns의 범위에서 각 조성의 비정질-결정질 상변화속도를 측정, 비교 분석하였다. 또한 각각의 박막을 $100^{\circ}C$ 에서 $400^{\circ}C$ 까지 $50^{\circ}C$ 간격으로 $N_2$ 분위기에서 1시간동안 열처리 한 후 XRD와 UV-Vis-NIR spectrophotometer를 사용하여 각 상의 구조분석 및 광학적 특성을 분석하였다. 또한 4-point probe로 면저항을 측정하였다.