• 한국재료학회지
• /
• 제30권9호
• /
• pp.489-494
• /
• 2020

SiC is a material with excellent strength, heat resistance, and corrosion resistance. It is generally used as a material for SiC invertors, semiconductor susceptors, edge rings, MOCVD susceptors, and mechanical bearings. Recently, SiC single crystals for LED are expected to be a new market application. In addition, SiC is also used as a heating element applied directly to electrical energy. Research in this study has focused on the manufacture of heating elements that can raise the temperature in a short time by irradiating SiC-I₂ with microwaves with polarization difference, instead of applying electric energy directly to increase the convenience and efficiency. In this experiment, Polydimethylsilane (PDMS) with 1,2 wt% of iodine is synthesized under high temperature and pressure using an autoclave. The synthesized Polycarbosilane (PCS) is heat treated in an argon gas atmosphere after curing process. The experimental results obtain resonance peaks using FT-IR and UV-Visible, and the crystal structure is measured by XRD. Also, the heat-generating characteristics are determined in the frequency band of 2.45 GHz after heat treatment in an air atmosphere furnace.

• 천문학회보
• /
• 제41권1호
• /
• pp.70.3-70.3
• /
• 2016

Active galactic nuclei (AGNs) typically show a non-thermal continuum locally represented by a power-law and many prominent emission lines in the UV and optical regions. AGNs are classified by two types, where Type I AGNs exhibit both broad and narrow lines and only narrow lines are observed in Type 2 AGNs. The unification models of AGNs invoke the existence of a molecular torus just outside of the broad line region. In the presence of a high column HI region associated with the molecular torus, we propose that significant fraction of broad line photons near Lyman series can be scattered by atomic hydrogen in the torus. In particular, $Ly{\alpha}$ being the strongest emission line, strong linear polarization may develop around $Ly{\alpha}$ through Rayleigh scattering. We adopt a Monte Carlo technique to investigate the polarized transfer of $Ly{\alpha}$ in a thick HI region with the shape of a torus. We consider the range of HI column density N_HI = 1020-23 with fixed geometric parameters of the torus such as the inner and outer radii and the height. We present the polarized spectra and angular distribution of Rayleigh scattered radiation around $Ly{\alpha}$. We find that the $Ly{\alpha}$ core part is polarized in the direction perpendicular to the symmetry axis whereas in the far wing part it is polarized in the parallel direction. It is concluded that the unification of AGNs implies that $Ly{\alpha}$ can be uniquely polarized through Rayleigh scattering.

• 한국결정성장학회지
• /
• 제16권4호
• /
• pp.133-140
• /
• 2006

The growth characteristics and properties of large size $SrAlF_5$ single crystals are described and compared with those of $BaMgF_4$. Transmission spectra in the vacuum ultraviolet wavelength region indicate a high transparency of $SrAlF_5$ (about 90% without considering surface reflection loses) down to 150 nm, on contrast to the optical loses observed for $BaMgF_4$. The ferroelectric character of $SrAlF_5$ is evidenced by the reversal of the spontaneous polarization in a hysteresis loop. The higher potential of $SrAlF_5$ in comparison with $BaMgF_4$ for the realization of all-solid-state lasers in the ultraviolet wavelength region by the quasi-phase matching (QPM) technique is pointed out. $SrAlF_5$, besides a higher grade of transparency, shows a nonlinear effective coefficient similar to that of quartz and uniaxial nature, on contrast to the one order smaller nonlinear coefficient and biaxial character of $BaMgF_4$. The refractive index of $SrAlF_5$ from the ultraviolet to the near-infrared wavelength region is measured by the minimum deviation method. The Sellmeier and Cauchy coefficients are obtained from the fits to the curves of the ordinary and extraordinary refractive indices, and the grating period for the first order QPM is estimated as a function of the wavelength. The poling periodicity for 193 nm SHG from 386 nm is $4{\mu}m$.

• 공업화학
• /
• 제19권6호
• /
• pp.661-667
• /
• 2008

본 연구에서는 LCD 백라이트용 휘도향상 편광필름으로 사용하기 위해, 콜레스테릭 액정(CLC)을 합성하여 네미틱 액정과 혼합한 다음 이들이 충진된 모듈을 제작하였다. 광확산필름에 의해 면광원화된 빛을 통과시킬 때, LCD 백라이트상에서 이들의 투과광 증폭 및 편광능력에 대한 특성을 연구하였다. 합성된 콜레스테릭 액정의 특성은 UV/Visible 스펙트럼과 편광현미경(POM) 등으로 평가하였다. 여러 종류의 선형 카르복실산을 콜레스테롤 분자에 도입하여 콜레스테릭 메소젠 사이의 유연격자를 이루도록 유도하여 각 층에서 일정한 방향성을 유지하도록 하였다. 또한 CLC필름을 적층하여 가시광선대에서 편광능력, 휘도향상 및 투과파장영역을 넓히고 백라이트 유니트의 밝기를 향상시키는 모듈로 적용할 수 있었다.

• 대한화학회지
• /
• 제22권4호
• /
• pp.239-244
• /
• 1978

Stilbene 유도체인 trans-1,2-bispyrazylethylene에 대한 분광학적 연구를 행하였다. 보통의 자외선 흡수스펙트럼에서는 $n{\rightarrow}{\pi}^*$ 흡수밴드는 에너지가 비슷한 ${\pi}{\rightarrow}{\pi}^*$ 흡수밴드에 가려져서 나타나지 않는데 2차 미분 스펙트럼과 저온(77˚K)에서의 스펙트럼으로 부터 $n{\rightarrow}{\pi}^*$ 흡수 밴드를 확인할 수가 있었다. 또한 ${\pi}{\rightarrow}{\pi}^*$ 흡수밴드들의 전이에너지를 PPP-SCF-CI MO 방법으로 계산한 결과 스펙트럼에서 얻은 값과 잘 일치했다. 형광스펙트럼, 형광편광스펙트럼, 그리고 PPP-SCF-CI MO 방법에 의한 계산으로부터 형광을 내는 상태는 $^1({\pi},\;{\pi}^*)$ 상태임을 알 수가 있었으며 이것은 형광에 대한 alkaline salt effect의 결과와 일치한다.

• 한국세라믹학회지
• /
• 제40권4호
• /
• pp.385-392
• /
• 2003

Sol-gel preparation technique using a chemical reaction of metal alkoxides has been widely used for the fabrication of various materials including ceramics. However, its mechanism has been studied till now because a number of chemical ways are possible from various alkoxides and additives. In this study, the mechanism of hydrolysis, condensation, and polymerization of alkoxides were investigated from the fabrication of lead-zirconate-titanate (PbZr$\_$x/Ti$\_$l-x/O$_3$; PZT) thin film that is used as various micro-actuator, transducer, and sensor because of its high electro-mechanical coupling factors and thermal stability. Furthermore, the fabrication process and characteristics of self-patternable PZT film using photosensitive stabilizer were studied in order to resolve the problem of physical damage and properties degradation during dry etching for device fabrication. Using an optimum condition to prepare the self-patternable PZT film, more than 5000 ${\AA}$ thick self-patternable PZT film could be fabricated by three times coating. The PZT film showed 28.4 ${\mu}$c/cm$^2$ of remnant polarization (Pr) and 37.0 kV/cm of coercive field (E$\_$c/).

• 한국식품영양과학회지
• /
• 제24권5호
• /
• pp.702-706
• /
• 1995

A major component(compound A) in the ethylacetate fraction exhibited a strong antimicrobial activity was identified by UV, IR, FABMS and NMR. The compound A showed strong absorbance at 209, 259 and 359nm, indicating a flavonoid ring structure. IR spectrum possessed absorbance of OH at 3400∼3300cm-1, ketone at around 1650cm-1, and aromatic C=C at around 1660cm-1. Molecular weight of the compound A calculated as 478 from the information of m/z 479(M＋H)+ and m/z 477(M-H)+ in the FABMS spectrum. Molecular formula of this compound was found to be C22H22O12 from m/z 479.1220(＋3.1mmu for C22H23O12) of HRFABMS spectrum and from 13C-NMR spectrum. 1H-NMR and 13C-NMR spectra of the compound A revealed aromatic proton and benzene rings. Distortionless enhancement by polarization transfer(DEPT) exhibited that the compound A possessed 10 quaternary carbons and 3 substituted benzene rings including a methoxy group substitution. The compound A was identified as isorhamnetin 3-O-β-glucopyranoside by spectrophotometric methods in conjunction with 1H-1H COSY, 1H-13C COSY and HMBC, which revealed a flavone with OH group at 3, 5, 7, and 4' and methoxy group at 3' positions esterified to glucose.

• 전자공학회논문지D
• /
• 제34D권4호
• /
• pp.106-112
• /
• 1997

We demonstrate a novel wavelength -division add/drop multiplexer employing fiber bragg gratings and polarization beam splitters. the multiplexer is easy to fbricate without any special technique such as UV trimming, and yet shows very stable performance with less than 0.3-dB crosstalk power penalty in a 0.8-nm-spaced, 2.5Gbps-per-channel WDM transmission system. We find that the rejection of adjacent channels is more than -6dB, and the signal leakage through output port is less than -34dB.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.38.1-38.1
• /
• 2010

Nanofibers have a large potential in air filtration applications. In this work, we have developed a photocatalytic polyvinyl alcohol PVA/$TiO_2$ nanofibers membrane for the treatment of air filtration by using electrospinning method. PVA were electrospun into nanofibrous membranes and $TiO_2$ nanoparticles were loaded in PVA nanofibers in various contents from 10% (w/w) to 50% (w/w). The UV-Vis spectra were conducted for testing the existence of $TiO_2$ nanoparticles in PVA fibers. SEM analysis indicated that $TiO_2$ nanoparticles were loaded on the surface of PVA fibers and dispersed linearly along the fiber direction, which originated from the effect of polarization and orientation caused by high electric field. X-ray diffraction (XRD) was used to determine the crystalline of the membrane. Tensile strength was measured to evaluate the physical properties of the membrane. Therefore, our work suggested that PVA/$TiO_2$ nanofiber membrane has a potential application in air filtration area.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.528-531
• /
• 2000

Deposition of PZT with UV laser ablatio was applied for realization of thin film sensors and actuators. Deposition rate of more than 20nm/min was attained by pulsed KrF excimer laser deposition, which is fairly better than those obtained by the other methods. Perovskite phase was obtained at room temperature deposition with Fast Atom Beam(FAB) treatment and annealing. Smart MEMS(Micro electro-mechanical system) is now a suject of interest in the field of micro optical devices, micro pumps, AFM cantilever devices etc. It can be fabricated by deposition of PZT thin films and micromachining. PZT films of more than 1 micron thickness is difficult to obtain by conventional methods. This is the reason why we applied excimer laser ablation for thin film deposition. The remanent polarization Pr of 700nm PZT thin film was measured, and the relative dielectric constant was determined to about 900 and the dielectric loss tangent was also measured to be about 0.04. XRD analysis shows that, after annealing at 650 degrees C in 1 hour, the perovskite structure would be formed with some amount of pyrochlore phase, as is the case of the annealing at 750 degrees C in 1 hour.