• Korean Chemical Engineering Research
• /
• 제55권6호
• /
• pp.754-761
• /
• 2017

알코올에 분산된 콜로이드 실리카를 아크릴 단량체인 pentaerythritol triacrylate (PETA)와 혼합시킴에 의해 UV 경화형 친수성 코팅 용액을 제조하였다. 또한 이 친수성 코팅 용액을 PC 기재 위에 스핀코팅 시킨 후 10 min 동안 UV 경화시킴에 의해 친수성 코팅 도막이 제조되었다. 이 과정 중 코팅 용액 중의 콜로이드 실리카 양을 10~50 g으로 변화시켜 코팅 도막의 친수성에 미치는 영향을 살펴보았다. 그 결과 코팅 용액 중의 콜로이드 실리카 양은 코팅 도막의 친수성에 큰 영향을 미치며, 콜로이드 실리카 양이 30 g인 경우에 $37^{\circ}$의 가장 낮은 접촉각과 H의 우수한 연필경도를 나타내었다.

• 한국염색가공학회지
• /
• 제22권3호
• /
• pp.239-245
• /
• 2010

Breathable waterproof PET fabrics were prepared by the UV coating of UV-curable polyurethaneacrylate(PUA) formulation mixed with polyethyleneglycol(PEG) as a water soluble pore former. The dispersed PEG in the UV-cured coating was extracted by warm water, which can generate individual circular pores uniformly distributed all over the coating instead of pore channels. Accordingly the moisture permeability of the microporously coated fabrics increased substantially with increasing PEG addition without significant reduction of hydrostatic pressure. Also the silicone diacrylate addition in the formulation was beneficial in increasing the hydrostatic pressure. The UV-based microporous coating can be an alternative to conventional thermal curing of solventborne polyurethane coating owing to the enhanced environment friendliness and energy saving.

• 조명전기설비학회논문지
• /
• 제26권4호
• /
• pp.35-40
• /
• 2012

In this study, the ultraviolet (UV) intensity of polymer insulator was measured using the Anti-Reflective (AR) coating lens on the occurrence of corona discharge. The UV intensity was compared before and after the AR coating. Under the 200-260[nm] of UV lens, the reflection rate before AR coating was 7.5~5.5[%] with 85-89[%] of transmission rate. After AR coating, however, the reflection rate decreased to 1.3~1.22[%] with improved transmission (97.4~97.6[%]). Then, the UV intensity by distance was measured in the polymer insulator. According to the measurement, the UV intensity increased 6.5 times at 37.5[%] of Vm/Vbd with 5[m] of distance. As distance increased, the growth rate declined. As high voltage increased, in addition, AR coating was less effective due to the count error caused by the UV sensor pulse signal overlap. Therefore, it appears that it would be more effective to detect corona discharge with 5[m] or less of distance at diagnosis of power facilities by AR coating and UV sensor sensitivity.

• Korean Membrane Journal
• /
• 제7권1호
• /
• pp.19-27
• /
• 2005

PP hollow fiber membrane was hydrophilized by EVOH dip coating followed by low temperature plasma treatment and UV irradiation. EVOH coating attained high water flux without any prewetting but its stability did not guaranteed at high water permeation rate. At high water permeation rate, water flux declined gradually due to swelling and delamination of the EVOH coating layer causing pore blocking effect. However, plasma treatment reduces the swelling, which suppress delamination of the EVOH coating layer from PP support result in relieving the flux decline. Also, UV irradiation helped the crosslinking of the EVOH coating layer to enhance the performance at low water permeation rate. FT-IR and ESCA analyses reveal that EVOH dip coating performed homogeneously through not only membrane surface but also matrix. Thermogram of EVOH film modified plasma treatment and W irradiation show that crosslinking density of EVOH layer increased. Chemical modification by plasma treatment and UV irradiation stabilized the hydrophilic coating layer to increase the critical flux of the submerged membrane.

• Corrosion Science and Technology
• /
• 제9권6호
• /
• pp.265-269
• /
• 2010

This paper describes the exfoliation and surface modification of muscovite mica for UV coating formulation. For the exfoliation of the mica, hydrothermal process was used in the presence of lithium nitrate ($LiNO_3$). After the cation exchange with $Li^+$ ions, the surface of the mica was modified with several amphiphilic substances to increase compatibility and storage stability in UV coating formulation. Such a hydrophobic surface modification affected colloidal stability as well as dispersibility of the exfoliated mica in UV coating solution. Anticorrosive property of mica/UV coated steel plates was tested by salt spray test (SST) and compared with sodium montmorillonite ($Na^+$-MMT)/UV coated steel plates.

• 반도체디스플레이기술학회지
• /
• 제13권1호
• /
• pp.35-41
• /
• 2014

UV curable transparent hard coating materials have been developed to improve the mechanical and optical properties of PET substrate. The coating materials were synthesized using various urethane acrylate oligomers, monomers, photo initiators, and leveling agents. The materials were coated on PET substrates and UV cured. The hard coated PET films were shown to have the good scratch resistance and transparency. When the urethane acrylate oligomer with more functional groups was introduced into the coating solution, the mechanical and optical properties were improved. However the higher concentration of 9-functional oligomer resulted in the decrease of workability. The addition of trimethylolpropane ethoxylate$(EO/OH)_9$ triacrylate(TMPETA) to coating solution improved the workability and properties. As a result, the UV cured film from the formulation of urethane acrylate oligomer with 9-functional groups, TMPETA as a monomer, IRACURE 754 as a photo initiator and BYK-340 as a leveling agent showed the best mechanical and optical properties in this study.

• 폴리머
• /
• 제38권3호
• /
• pp.391-396
• /
• 2014

고분자 마이크로니들은 몰딩 공정으로 쉽고 저렴하게 생산할 수 있지만 3차원 고분자 마이크로 구조체에 수용액 기반의 약물 코팅은 어려움이 있다. 2차원 형태의 평면 금속 마이크로니들에 약물을 코팅한 기존의 코팅 마이크로니들과 비교하여 볼 때 3차원 구조의 고분자 마이크로니들은 코팅 면적이 2배 넓고 단위면적당 마이크로니들의 수를 크게 증가시킴으로써 두 배 이상의 약물을 경피를 통해 전달할 수 있다. 증점제와 계면활성제 첨가 방법의 경우 2차원의 평면에는 균일한 코팅을 얻을 수 있었지만 3차원 구조의 고분자 마이크로니들 표면에서는 만족할 코팅을 얻지 못했다. 하지만, 고분자 마이크로니들 표면을 금속 코팅 혹은 UV/ozone으로 처리한 경우 3차원의 마이크로 니들 표면에 만족할 코팅을 얻을 수 있었으나 금속 코팅의 경우 피부에 찌르고 제거하는 과정에서 금속이 피부 안에 남는 안전성 문제가 있어 UV/ozone을 최종 표면 처리 방법으로 선정하였다. 이렇게 처리한 고분자 마이크로니들 표면에 calcein이 첨가된 코팅물질로 코팅된 마이크로니들은 15분 이상의 피부 투여로 코팅물질을 성공적으로 진피층까지 전달할 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.699-700
• /
• 2010

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2009년도 추계학술발표논문집
• /
• pp.80-83
• /
• 2009

Application of UV curing technique for poly vinyl chloride (PVC) floor tiles coating has improved the quality of PVC floor. Various formulations including acrylated oligomers based on a polyurethane were blended with reactive monomers, photoinitiators and other additives. The used oligomers are commercial aliphatic urethane acrylates. Thin films were prepared on PVC tiles by bar coating with different formulations using UV radiation. The coating resins were characterized by FTIR. The properties of UV-cured films such as gloss grade and adhesion were examined. The properties of UV-cured films dependent on the influence of composition and processing conditions was studied. The investigation was conducted to achieve an optimal domain of composition and desired coating effect.

• 접착 및 계면
• /
• 제13권1호
• /
• pp.31-37
• /
• 2012

본 연구는 UV-LED 경화형 칼라코팅에 대한 경화특성에 관한 것으로, 특히 UV-LED 파장(365, 395, 405 nm), 불활성 기체, 증감제 및 Dual curing에 따른 경화성을 평가하였다. 광경화 과정과 코팅 도막의 Film-air (FA) interface와 Film-substrate (FS) interface에서 존재하는 미반응 아크릴레이트에 대한 평가는 Photo-DSC와 FT-IR/ATR을 이용하여 각각 조사하였다. Photo-DSC 측정 결과 발열량과 전환율은 405 nm UV-LED를 이용한 코팅 시스템의 경우가 395 및 365 nm UV-LED를 사용한 경우보다 높게 나타났다. UV-LED 경화형 시스템은 전반적으로 Film-substrate (FS) interface의 경화도가 높은 것으로 나타나 후막경화가 우수함을 알 수 있었으나, Film-air (FA) interface의 표면 경화도는 산소저해 현상으로 인해 매우 낮음을 FT-IR/ATR 결과를 통해 확인하였다. 이러한 낮은 표면 경화도는 불활성 기체인 질소를 사용하거나 Dual curing 방법을 도입함으로써 개선할 수 있었다.