• 대한환경공학회지
• /
• 제29권6호
• /
• pp.662-669
• /
• 2007

Rhodamine B(RhB) 폐수의 색도와 COD 제거를 위해 $O_3$, $UV/TiO_2$, $O_3/UV$ 및 $O_3/UV/TiO_2$ 공정과 같은 고급산화법의 영향을 연구하였다. 오존 공정의 경우 오존 농도가 높을수록 탈색속도가 높아졌으며, $UV/TiO_2$와 $O_3/UV/TiO_2$ 공정의 최적 $TiO_2$ 농도는 0.4 g/L 였다. $O_3/UV$ 공정은 오존 공정에 비해 초기 탈색속도상수가 높고 탈색종결시간도 줄어드는 것으로 나타났다. 실험에 적용한 공정의 초기 탈색속도상수의 순서는 $O_3/UV/TiO_2>O_3/UV>O_3>UV/TiO_2$로 나타났다. 모든 공정의 탈색속도가 COD로 표시한 무기화 속도보다 빠르고, COD는 처리에 시간이 더 소요되는 것으로 나타났다. COD 제거속도는 $O_3/UV/TiO_2>O_3/UV>UV/TiO_2{\geqq}O_3$의 순서로 나타났다. 네 공정 중에서 광촉매와 오존 공정을 조합한 $O_3/UV/TiO_2$ 공정이 염료 폐수와 같은 폐수의 색도와 COD 제거에 적절한 것으로 나타났다.

• 한국환경보건학회지
• /
• 제27권4호
• /
• pp.93-98
• /
• 2001

Wastewaters produced in textile industrial processes contain dyes which are not easily amenable to biological treatment. The object of this study is to determine the post-treatment system of biological process for the textile wastewater by comparing three different types of chemical process, which were 1) post-treatment by ozone or UV, 2) post-treatment by coagulation,3) post-treatment by ozone or UV followed by coagulation. In an application ozone or UV as a post-treatment, color was generally decreased with time, however, SCOD removal effect was not that good. When coagulation was used as point-treatment process, the effluent quality was satisfying. Therefore, the application of coagulation process as a post-treatment of biological process would be more desirable than that as a ozone or UV.

• 한국물환경학회지
• /
• 제21권3호
• /
• pp.267-273
• /
• 2005

Dye wastewater generally contains strong color and non-biodegradable materials. Therefore, the conventional wastewater treatment plant can hardly meet the regulation of wastewater effluent water. In this study, a pilot plant of the conventional process followed by advanced oxidation process (AOP), was set up to treat the dying wastewater. The treatment efficiencies on the various candidate processes, such as ozone alone, UV alone, ozone/UV, $ozone/H_2O_2$, $H_2O_2/UV$ and $ozone/UV/H_2O_2$, were investigated in the various ozone and $H_2O_2$ doses. As the results, the $ozone/H_2O_2$ process, among the tested processes, showed the highest efficiency for removing color and $COD_{Cr}$. For color removal, the ozone alone process was enough without combining UV or $H_2O_2$. No significantly enhanced efficiency for removing color and $COD_{Cr}$ by UV irradiation was observed because of the very low transmittance of UV light in dye wastewater.

• Korean Chemical Engineering Research
• /
• 제45권6호
• /
• pp.648-655
• /
• 2007

UV/H_2O_2$, $O_3$, $O_3/H_2O_2$, $UV/H_2O_2/O_3$ 공정을 이용한 테레프탈산 제조공정 폐수의 COD 및 색도제거 연구를 수행하였다. UV/H_2O_2$, $O_3$, $O_3/H_2O_2$, $UV/H_2O_2/O_3$ 공정에서의 COD 제거율은 각각 10, 48, 56, 63%, 색도 제거율은 $UV/H_2O_2$ 공정이 80%, $O_3$, $O_3/H_2O_2$, $UV/H_2O_2/O_3$ 공정은 모두 99% 이상 효과적으로 제거되는 것으로 나타났다. COD 및 색도 제거율이 가장 우수한 $UV/H_2O_2/O_3$ 공정에서 테레프탈산 제조공정 폐수의 주요 유기물 성분인 테레프탈산, 이소프탈산 그리고 벤조산 성분은 120분 이내에 모두 99% 이상 제거되었다. 또한 $UV/H_2O_2$, $O_3/H_2O_2$, $UV/H_2O_2/O_3$ 공정에서의 최적 $H_2O_2$ 주입농도는 각각 0.5M, 25 mM 그리고 5 mM로 나타나, UV와 $H_2O_2$를 오존산화 공정에 조합함으로써 유기물 제거율 향상과 함께 사용된 $H_2O_2$의 저감효과를 동시에 얻을 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제32권spc8호
• /
• pp.3039-3044
• /
• 2011

This study suggests the prediction model for the concentration variation of $NO_2{^-}$ and $NO_3{^-}$ along with the rate constants of all reactions during ozonation under UV radiation ($O_3$/UV process). While $NO_2{^-}$ was completely converted into $NO_3{^-}$ during the $O_3$-only process, the production of $NO_2$ radical or $N_2O_4$ was expected in the $O_3$/UV process. In addition, the quenching of OH radicals, by $NO_2$ radical in the $O_3$/UV process, resulted in regeneration of $NO_2{^-}$. However, the regeneration of $NO_2{^-}$ was not observed in the $O_3$/UV process in the presence of $C_6H_6$ where the concentrations of $NO_2{^-}$ and $NO_3{^-}$ were significantly reduced compared to in the process without $C_6H_6$. The pseudo-first order rate constants of all species were calculated with and without the presence of $C_6H_6$ to predict the variation of concentrations of all species during the $O_3$/UV process. It was suggested that $NO_2{^-}$ and $NO_3{^-}$ in the $O_3$/UV process can be more effectively removed from an aqueous system with an OH radical scavenger such as $C_6H_6$.

• 공업화학
• /
• 제28권3호
• /
• pp.318-325
• /
• 2017

원자력발전소 2차 계통수에 사용되는 에탄올아민이 포함된 오염수는 복수탈염설비의 이온교환수지에서 포집된다. 이온교환수지의 재생과정에서 에탄올아민과 다량의 이온성 물질이 포함된 강산성 폐수가 발생된다. 본 연구는 이온교환수지에서 발생하는 폐수를 처리하기 위해서 자외선 산화방법을 적용하였다. 산화방법은 흡착제를 함께 사용한 자외선 산화와 흡착제를 적용하지 않고 자외선 산화만 적용할 수 있는 장치를 개발하여 자외선 산화방법에서 흡착제가 폐수처리 성능에 미치는 영향을 파악하였다. 연구 결과는 입상활성탄을 흡착제로 적용한 UV/GAC산화공정은 pH 12.8에서 COD 제거 효율은 71.3%로 나타났다. 동일한 pH 조건에서 흡착제를 적용하지 않은 UV 산화공정보다 COD 제거 효율이 21.8% 높게 나타났다. T-N의 제거는 pH 12.8일 때 88.6%로 흡착제를 적용하지 않은 UV산화공정보다 18.0% 높게 나타났다. 이와 같은 결과는 입상활성탄이 에탄올아민을 고정시켜서, UV 램프에 의한 산화공정의 효율을 높이는 것으로 여겨진다. 따라서 UV/GAC 흡착산화공정이 에탄올아민 함유 폐수의 처리에 더 효율적이다.

• 한국인쇄학회지
• /
• 제21권2호
• /
• pp.55-65
• /
• 2003

A novel evaluation method is investigated for UV curing process in printing system. The method is based on the measurement of conducivity change by the photopolymerization of UV curable inks and paints. It is found that the decrease of conductivity is caused by photopolymerization of epoxy monomer during UV curing process of ink film and the by the rate of UV curing. It is possible to make the dynamical evaluation the curing rate of UV curable ink in curing process by this method.

• 한국물환경학회지
• /
• 제23권2호
• /
• pp.274-280
• /
• 2007

The photochemical decolorization of Rhodamine B (RhB) in water has been carried out by photo-Fenton process. The effect of applied $H_2O_2$, $Fe^{2+}$ dose, solution pH and UV dose have been studied. The influence of constituent processes of photo-Fenton such as UV, $H_2O_2$ and Fenton has been investigated. Comparison of RhB removal was made between the photo-Fenton and $UV/H_2O_2$ process. The results obtained showed that the optimum dosage of $Fe^{2+}$ and $H_2O_2$ were 0.0031 mmol and 0.625 mol, respectively. pH 3 is found to be the optimum pH of for photo-Fenton process. pH and UV dose strongly influenced the decolorization of RhB in photo-Fenton process. The photo-Fenton and $UV/H_2O_2$ processes showed similar decolorization and seem to be appropriate for the decolorization of dye wastewater.

• 상하수도학회지
• /
• 제24권1호
• /
• pp.109-117
• /
• 2010

In the present study, the degradation characteristics of Lindane by Advanced Oxidation Processes(UV/$H_2O_2$, Photo-Fenton process) were studied. The degradation efficiency of Lindane in aqueous solution was investigated at various initial pH values, Fenton's reagent concentrations and initial concentrations of Lindane. GC-ECD was used to analyze lindane. Lindane has not been degraded without application of AOPs over two hours. But, approximately 5% of lindane was degraded with UV or $H_2O_2$ alone. Lindane with UV/$H_2O_2$ process showed approximately 7% higher removal efficiency than $H_2O_2$ process. In the UV/$H_2O_2$ process, the pH values did not affect the removal efficiency. The optimal mole ratio of $H_2O_2/Fe^{2+}$ for lindane degradation is about 1.0 in Photo-Fenton process. Also, the experimental results showed that lindane removal efficiency increased with the decrease of initial concentration of lindane. Under the same conditions, the order lindane of removal efficiency is as following : Photo-Fenton process > UV/$H_2O_2$ process > $H_2O_2$ process. In addition, intermediate products were identified by GC-MS techniques. Than PCCH(Pentachlorocyclohexene) was identified as a reaction intermediate of the Photo-Fenton process.

• Membrane and Water Treatment
• /
• 제8권3호
• /
• pp.211-223
• /
• 2017

In this work, an attempt was made to compare the effects of UV irradiation on the intrinsic and separation properties of membranes made of two different polymeric materials, i.e., polyvinylidene fluoride (PVDF) and polyetherimide (PEI). The changes on membrane structural morphologies and chemical characteristics upon UV-A exposure (up to 60 h) were studied by FESEM and FTIR, respectively. It was found that cracks and fractures were detected on the PVDF-based membrane surface when the membrane was exposed directly to UV light for up to 60 h. Furthermore, the mechanical strength and thermal stability of irradiated PVDF-based membrane was reported to decrease with increasing UV exposure time. The PEI membrane surface meanwhile remained almost intact throughout the entire UV irradiation process. Filtration experiments showed that the permeate flux of UV-irradiated PVDF membrane was significantly increased from approximately 11 to $16L/m^2.h$ with increasing UV exposure time from zero to 60 h. Oil rejection meanwhile was decreased from 98 to 85%. For the PEI-based membrane, oil rejection of >97% was recorded and its overall structural integrity was marginally affected throughout the entire UV irradiation process. The findings of this work showed that the PEI-based membrane should be considered as the host for photocatalyts incorporation if the membrane was to be used for UV-assisted wastewater treatment process.