• 공업화학
• /
• 제10권1호
• /
• pp.30-34
• /
• 1999

클로로타노닐과 엔도슬판을 UV 조사, pH 3.0에서의 UV조사, 그리고 3.5% 염수에서 UV조사를 하여 광분해 거동을 연구하였다. 농약의 광분해과정은 가스크로마토그래프, 총유기탄소, 그리고 이온크로마토그래프를 사용하였다. Low pressure mercury multilamp($8W{\times}6$)를 반응기에 잠수시켜 실험을 하였으며, 초기농도는 10 ppm으로 하였다. 클로로타노닐은 UV 조사, pH 3.0조건에서 UV조사, 그리고 3.5% 염수조건에서 UV조사 조건에서 반응시간 30분에 거의 광분해되었다. 자외선조사에서 엔도슬판-${\alpha}$는 38%, 엔도슬판-${\beta}$는 25% 분해되었다. 엔도슬판-${\alpha}$(83%)는 자외선조사에서 65%, pH 3.0의 자외선조사에서 70%, 35% 염수의 자외선조사에서는 75% 분해되었다. 엔도슬판(16%)는 자외선조사에서 80%, pH 3.0의 자외선조사에서는 98%, 3.5% 염수의 자외선조사에서는 90% 분해되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.177-180
• /
• 2000

We studied the degradation of EVA for the protection of solar cell by UV-rays irradiation. We investigated the reduction of electrical efficiency, photo transmmitance and degradation of EVA by UV-rays irradiation. We utilized the UV irradiation equiped with fluorescent 313nm UV lamp and radiated for 400 hours. For the chemial analysis, we used the UV-vis spectrometer, XPS and examined the degradation mechanism by UV irradiation. It is found that the discolored phenomena, the decrease of photo transmmitance and oxidation reaction is occured by UV irradiation on the EVA sample for the protection of solar cell.

• 한국가구학회지
• /
• 제26권4호
• /
• pp.428-434
• /
• 2015

In this study, we received each wood plastic composites (WPC) from three manufacturers. These WPCs were evaluated regarding their physical and mechanical properties of both before and after accelerated weathering by ultraviolet (UV) irradiation. The total time of exposure of the WPCs to UV irradiation was 1800 h. The water absorption, volumetric swelling and shrinkage of WPCs did not affected by UV irradiation. Among the mechanical properties, there was no significant differences in bending strength and screw withdrawal resistance of UV treated WPCs compared with those of reference WPCs. However, surface hardness of WPCs showed decrease under UV irradiation. Stereoscopic microscopy observation revealed deterioration of the surface layer polymer in all weathered WPCs by UV. Exposure of the WPCs to UV irradiation caused decomposition and disappearance of the polymer layer. From this result, we can estimate that damage of polymer by UV led to a decrease in the surface hardness of the WPCs. The wood flours retained original shape after accelerated weathering by UV irradiation.

• 한국생활과학회지
• /
• 제20권5호
• /
• pp.1009-1023
• /
• 2011

This study was carried out to investigate the variations of catechu dyed fabrics under UV irradiation. Catechu dyed cotton and silk fabrics mordanted with Fe and Cu were irradiated with UV under dry and wet conditions, and then were evaluated on color changes and mechanical properties. Owing to UV irradiation, the K/S values of catechu dyed cotton fabrics increased until a certain amount of time but those of catechu-dyed silk fabrics increased continuously. Cu mordanting cotton fabrics showed the smallest changes due to the UV treatment, and silk fabrics mordanted with Fe showed the largest changes. Wetted fabrics were accelerated maillard browning by UV. Un-mordanted cotton fabrics treated with UV under dry conditions changed its YR color to Y, but changed its Y color to YR under wet conditions. However, mordanted cotton fabrics treated with UV didn't change their color. Dyed silk fabrics except those Fe mordanted and in wet conditions continued to keep their color after UV irradiation. Silk fabric mordanted with Fe under wet conditions changed its Y color to YR by UV irradiation. UV irradiation didn't affect the mechanical properties of catechu-dyed cotton and silk fabrics in any significant way.

• 반도체디스플레이기술학회지
• /
• 제6권1호
• /
• pp.65-69
• /
• 2007

A design of experiments was applied in order to investigate the effect of processing variables in UV irradiation on the electrical/optical properties in indium-zinc oxide thin films, The processing variables, equivalently input variables are listed as UV irradiation time, oxygen flow rate, and chamber pressure. The statistical significance of Ultra Violet (UV) treatment was confirmed using a paired-t test. The full factorial $2^3$ design was employed to determine significant main and interaction effects in UV irradiation process. The chamber pressure and the interaction between UV irradiation time and $O_2$ flow rate were found to be statistically significant at the significance level of 0.1. Furthermore, the optimized approach was proposed in achieving the improved conductivity after UV irradiation.

• 공업화학
• /
• 제9권1호
• /
• pp.28-32
• /
• 1998

두 종류의 유기인계 살충제인 디클로로보스와 클로로피리포스를 UV조사, UV 조사와 $TiO_2$분말 그리고 UV조사와 sea sand를 저압수은 램프를 이용하여 분해실험을 하였다. 이 화합물의 확인은 가스크로마토그래프, 총유기탄소 그리고 이온크로마토그래프를 사용하였다. 두 물질 모두, UV조사와 sea sand가 UV 조사와 UV조사와 $TiO_2$분말보다 분해가 더 잘 되었다. 반응 최종생성물은 디클로르보스에서는 $Cl^-$, 클로로피리포스에서는 $Cl^-$ $SO_4{^{2-}}$등이 생성되었다.

• 한국식품저장유통학회지
• /
• 제20권1호
• /
• pp.45-51
• /
• 2013

UV-C 및 전자선 조사에 의한 막걸리의 품질변화를 측정하기 위하여 생막걸리를 UV-C 및 전자선 조사하고 $4^{\circ}C$에서 15일간 저장하여 이에 따른 품질 변화를 측정하였다. UV-C 및 전자선 조사에 의한 미생물 분석 결과, 전자선 조사가 UV-C 조사보다 막걸리 내 미생물을 제어하는 데 더 효과적인 기술로 확인되었다. UV-C 또는 전자선 및 저장기간에 따라 pH가 증가하는 경향을 보였다. 산도 측정 결과, 저장기간에 따라 UV-C 및 전자선 조사군이 대조군보다 산도가 유의적으로 증가하는 경향을 보였다. 명도의 경우 UV-C 및 전자선에 의해 그 값이 증가하는 경향을 보인 반면 저장기간이 증가함에 따라 감소하는 경향을 보였다. 적색도는 전자선 처리군이 다른 처리군에 비해 높은 값을 보였으며, 저장기간에 따른 변화는 일관적이게 나타나지 않았다. 황색도는 UV-C 및 전자선 조사에 따른 변화는 일관적이지 않았으나 저장기간에 따라 값이 증가하는 경향을 보였다. 환원당 함량 측정 결과 저장 초기 UV-C 및 전자선 조사에 의해 함량이 높았으나, 저장기간에 따라 대조군에 비해 빨리 감소하였다. 따라서, 전자선 조사가 UV-C 조사보다 막걸리 내 미생물을 효과적으로 제어할 수 있다고 판단된다. 그러나 막걸리에의 UV-C 또는 전자선 조사로 인해 발생되는 품질변화를 최소화하기 위한 방법 및 UV-C 또는 전자선 조사에 의한 화학적 특성 변화의 규명에 대한 지속적인 후속연구가 필요할 것으로 판단된다.

• 한국전기전자재료학회논문지
• /
• 제12권1호
• /
• pp.75-80
• /
• 1999

In this study, we have investigated the relationship between the generation of pretilt angle and the polarization component in cells with UV light irradiation on polyimide (PI) surface. It was found that the generated pretilt angle is about $1.4^{\circ}$ with S-polarized UV light irradiation of $75^{\circ}$ on PI surface; it may be attributed to the asymmetry triangular of polymer surface with oblique S-polarized UV light irradiation on PI surface. Also, we measured that the generated pretilt angle is about $2.0^{\circ}$ with oblique P polarized UV light irradiation of $75^{\circ}$ on PI surface. Consequently, we suggest that the generated pretilt angle of the NLC is attributed to the interaction between the LC molecules and the polymer surface with oblique polarized UV light irradiation on PI surface.

• 한국염색가공학회지
• /
• 제13권4호
• /
• pp.256-263
• /
• 2001

Polyester fabrics were irradiated by UV produced by the low pressure mercury lamp. UV irradiation broke a C-H bond of PET fiber and caused the carbonyl groups on the fiber surfaces. Surface modification of PET fibers were accelerated by pretreatment with methanol, ethanol and acetone. The irradiated PET was dyed with basic dyes having cationic groups. The dye uptakes were proportional to irradiation times, and in inversely proportional to irradiation distances. The tensile strengths of PET fabrics decreased by UV irradiation. Washing fastness of PET dyeings were good, about 4-5 grade,andlightfastnesswerepoor, about l grade.

• 상하수도학회지
• /
• 제20권5호
• /
• pp.755-761
• /
• 2006

Recently, there is growing interest in ultraviolet (UV) irradiation as a disinfection technic in drinking water production due to its effectiveness to inactivate microorganisms such as Crytosporidium parvum without forming disinfection byproducts. However, UV disinfection is known for its drawback such as photoreactivation. Despite many works concerning the photoreactivation, most of works were focused on indicator or non pathogenic microorganisms. The objective of this study is to examine the photoreactivation of Pseudomonas aeruginosa which is an opportunistic pathogen as UV radiation by LP and MP UV lamp was applied. The result showed that P. aeruginosa had high photo repair efficiency regardless of the type of UV irradiation. Both of the effective log repair values of LP and MP UV irradiation were found approximately 2.6 log. In addition, photo repaired P. aeruginosa was not significantly different in forming biofilm in comparison with non treated P. aeruginosa.