• Bulletin of the Korean Chemical Society
• /
• 제26권3호
• /
• pp.447-450
• /
• 2005

The crude methanol extract of the fruits of Amomum tsao-ko (Zingiberaceae) showed cytotoxic activity. Bioactivity-guided separation led to the isolation of a diarylheptanoid, tsaokoarylone [7-(4-hydroxy-3-methoxyphenyl)-1-(4-hydroxyphenyl)-hepta-4E,6E-dien-3-one] (2). 2 showed cytotoxicity at 4.9 and 11.4 $\mu$g/mL ($IC_{50}$) against human nonsmall cell lung cancer A549 and human melanoma SK-Mel-2, respectively, determined by SRB colorimetric method. During purification-(4-hydroxyphenyl)-4-hydroxyhexan-2-one (4) together with three known diarylheptanoids was also isolated. Their structures were determined from interpretation of spectroscopic data (IR, UV, MS, and NMR) and synthesis confirmed the structure of 2.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.45-45
• /
• 2009

This paper describes the formation of porous 3C-SiC by anodization. 3C-SiC thin films were deposited on p-type Si(100) substrates by APCVD using HMDS (Hexamethyildisilane: $Si_2(CH_3)_6$). UV-LED(380 nm) was used as a light source. The surface morphology was observed by SEM and the pore size was increased with increase of current density. Pore diameter of 70 ~ 90 nm was achieved at 7.1 $mA/cm^2$ current density and 90 sec anodization time. FT-IR was conducted for chemical bonding of thin film and porous 3C-SiC. The Si-H bonding was observed in porous 3C-SiC around wavenumber 2100 $cm^{-1}$. PL shows the band gap enegry of thin film (2.5 eV) and porous 3C-SiC (2.7 eV).

• Journal of Microbiology and Biotechnology
• /
• 제19권12호
• /
• pp.1573-1575
• /
• 2009

Bioassay-guided fractionation of the culture broth of Aspergillus sp. FN070449 (KCTC 26428) using a DPPH (2,2-diphenyl-1-picrylhydrazyl) assay led to the isolation of two compounds: reticulone (1) and reticulol (2). Their chemical structures were elucidated on the basis of UV, IR, NMR, and MS spectroscopic analyses. Compound 1 exhibited more potent free radical scavenging activity on $ABTS^{\cdot+}$ (2,2'-azino-bis [3-ethylbenzthiazoline-6-sulphonic acid]) and DPPH radicals than did butylated hydroxyanisole (BHA) and caffeic acid.

• 제어로봇시스템학회논문지
• /
• 제14권8호
• /
• pp.767-773
• /
• 2008

This paper presents a localization system based on the use of electric compass and tracking IR light source. Digital RGB(Red, Green, Blue)signal of digital CMOS Camera is sent to CPLD which converts the color image to binary image at 30 frames per second. CMOS camera has IR filter and UV filter in front of CMOS cell. The filters cut off above 720nm light source. Binary output data of CPLD is sent to DSP that rapidly tracks the IR light source by moving Camera tilt DC motor. At a robot toward north, electric compass signals and IR light source angles which are used for calculating the data of the location system. Because geomagnetic field is linear in local position, this location system is possible. Finally, it is shown that position error is within ${\pm}1.3cm$ in this system.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.565-568
• /
• 2008

In this study, a blue-emitting $Sr_2MgSi_2O_7:Eu^{2+}$ (SMS) phosphor for white light-emitting diodes is reported. Through transition of $4f{\rightarrow}5d$ in $Eu^{2+}$, SMS showed a strong blue emission under UV excitation. Additionally, the variation of emission wavelength of SMS is explained by crystal field effect and is supported by rietveld refinement.

• 반도체디스플레이기술학회지
• /
• 제16권1호
• /
• pp.29-33
• /
• 2017

This paper presents a development of vision aligner with three channels for the wafer and plate bonding machine in manufacturing of LED. The developed vision aligner consists of three cameras and performs wafer alignment of rotation and translation, flipped wafer detection, and UV Tape detection on the target wafer and plate. Normally the process step of wafer bonding is not defined by standards in semiconductor's manufacturing which steps are used depends on the wafer types so, a lot of processing steps has many unexpected problems by the workers and environment of manufacturing such as the above mentioned. For the mass production, the machine operation related to production time and worker's safety so the operation process should be operated at one time with considering of unexpected problem. The developed system solved the 4 kinds of unexpected problems and it will apply on the massproduction environment.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2009년도 한국우주과학회보 제18권2호
• /
• pp.34.3-34.3
• /
• 2009

We have investigated the recent star formation history of the nearby galaxies using the SDSS optical and Galex UV data. To everyone's surprise, we found that roughly 30 percent of elliptical galaxies had a residual star formation in the last billion years, suggesting that residual star formation has been common even in ellipticals. Galaxy evolution models based on semi-analytic prescriptions including AGN feedback reasonably reproduce the star formation properties of elliptical galaxies. However, we found that the current galaxy models miserably fail to reproduce the star formation properties of satellite disc galaxies in cluster environments. Satellite disc galaxies in models are overly star-formation quenched in comparison to observation. Detailed investigations led us to conclude that this is due to the use of inaccurate prescriptions for the gas content evolution in the model. I present a solution to the problem by adopting more realistic physical prescriptions.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2-2
• /
• pp.201.1-201.1
• /
• 2003

Study of Acyl-CoA:cholesterol acyltransferase (ACAT) inhibitors from medicinal plants, we found strong inhibitory activity of ACAT enzyme from rat liver microsome by the CHC1$_3$ extract of Piper longum. Bioactivity-guided fractionation led to the isolation of Guineensine (1), its structure was elucidated by spectroscopic (IR, UV, MS and NMR) means. It inhibited ACAT activity in a dose-dependent manner with IC$\sub$50/ values of 1.2 $\mu\textrm{g}$/ml on in vitro assay using rat liver microsome.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.279.2-279.2
• /
• 2016

InGaN/GaN multiple quantum wells (MQWs) have been attracted much attention as light-emitting diodes (LEDs) in the visible and UV regions. Particularly, quantum efficiency of green LEDs is decreased dramatically as approaching to the green wavelength (~500 nm). This low efficiency has been explained by quantum confined Stark effect (QCSE) induced by piezoelectric field caused from a large lattice mismatch between InGaN and GaN. To improve the quantum efficiency of green LED, several ways including epitaxial lateral overgrowth that reduces differences of lattice constant between GaN and sapphire substrates, and non-polar method that uses non- or semi-polar substrates to reduce QCSE were proposed. In this study, graded short-period InGaN/GaN superlattice (GSL) was grown below the 5-period InGaN/GaN MQWs. InGaN/GaN MQWs were grown on the patterned sapphire substrates by vertical-metal-organic chemical-vapor deposition system. Five-period InGaN/GaN MQWs without GSL structure (C-LED) were also grown to compare with an InGaN/GaN GSL sample. The luminescence properties of green InGaN/GaN LEDs have been investigated by using photoluminescence (PL) and time-resolved PL (TRPL) measurements. The PL intensities of the GSL sample measured at 10 and 300 K increase about 1.2 and 2 times, respectively, compared to those of the C-LED sample. Furthermore, the PL decay of the GSL sample measured at 10 and 300 K becomes faster and slower than that of the C-LED sample, respectively. By inserting the GSL structures, the difference of lattice constant between GaN and sapphire substrates is reduced, resulting that the overlap between electron and hole wave functions is increased due to the reduced piezoelectric field and the reduction in dislocation density. As a results, the GSL sample exhibits the increased PL intensity and faster PL decay compared with those for the C-LED sample. These PL and TRPL results indicate that the green emission of InGaN/GaN LEDs can be improved by inserting the GSL structures.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.57.1-57.1
• /
• 2010

ITO(Indium Tin Oxide)는 전도도와 투과도 특성이 뛰어나 디스플레이, 태양전지, LED 등 여러 산업에서 전극 물질로 널리 사용 되어져 왔다. 최근 ITO의 사용이 급격히 증가하면서 이에 대한 연구가 활발히 진행되고 있다. ITO는 막의 특성을 좋게 하기 위하여 증착 시 Ar gas와 함께 $O_2$가스를 첨가하기도 한다. 본 연구에서는 산소 분압에 따른 ITO 박막의 전기적, 광학적 특성에 대하여 연구하였다. Corning사의 eagle 2000 glass 기판위에 스퍼터링을 이용하여 ITO layer를 증측하였고, 증착시, $O_2$ partial pressure를 0 - 0.5%까지 0.1% 간격으로 가변하였다. 증착된 샘플은 Sinton사의 UV-vis 장비를 이용하여 광학적 특성을 측정하였고, Hall measurement 장비를 이용하여 전기적 특성을 측정하였다. ITO 박막은 $O_2$의 partial pressure가 증가할수록 향상된 전기적, 광학적 특성을 나타내었다.