• 제목/요약/키워드: UV/ozone treatment

검색결과 104건 처리시간 0.036초

제주도 매립장 침출수 중 유기물의 효율적 처리를 위한 광촉매 분해 반응의 응용 (Application of Photocatalytic Degradation for Efficient Treatment of Organic Matter in Landfill Leachate in Jeju Island)

  • 이창한;이택관;조은일;감상규
    • 한국환경과학회지
    • /
    • 제31권8호
    • /
    • pp.677-689
    • /
    • 2022
  • In order to photocatalytically treat organic matter (CODCr) and chromaticity effectively, chemical coagulation and sedimentation processes were employed as a pretreatment of the leachate produced from landfill in Jeju Island. This was performed using FeCl3·6H2O as a coagulant. For the treated leachate, UV/TiO2 and UV/TiO2/H2O2 systems were investigated, using 4 types of UV lamps, including an ozone lamp (24 W), TiO2 as a photocatalyst, and/or H2O2 as an initiator or inhibitor for photocatalytic degradation. In the chemical coagulation and sedimentation process using FeCl3·6H2O, optimum removal was achieved with an initial pH of 6, and a coagulant dosage of 2.0 g/L, culminating in the removal of 40% CODCr and 81% chromaticity. For the UV/TiO2 system utilizing an ozone lamp and 3 g/L of TiO2, the optimum condition was obtained at pH 5. However, the treated CODCr and chromaticity did not meet the emission standards (CODCr: 400 mg/L, chromaticity: 200 degrees) in a clean area. However, for a UV/TiO2/H2O2 system using 1.54 g/L of H2O2 in addition to the above optimum UV/TiO2 system, the results were 395 mg/L and 160 degrees, respectively, which were within the emission standard limits. The effect of the UV lamp on the removal of CODCr, and chromaticity of the leachate decreased in the order of ozone (24 W) lamp > 254 nm (24 W) lamp > ozone (14 W) lamp > 254 nm (14 W) lamp. Only CODCr and chromaticity treated with the ozone (24 W) lamp met the emission standards.

Sur face Modification of Ultra High Molecular Weight Polyethylene Films by UV/ozone Ir radiation

  • Yun, Deuk-Won;Jang, Jin-Ho
    • 한국염색가공학회지
    • /
    • 제23권2호
    • /
    • pp.76-82
    • /
    • 2011
  • Ultra High molecular weight polyethylene(UHMWPE) films were photooxidized by UV/ozone irradiation. Reflectance of the irradiated films decreased in the low wavelength regions of visible light, indicating destructive interference of visible light due to roughened surface. The UV treatment developed the nano-scale roughness on the UHMWPE films surface, which increased by two-fold from 82.6 to 156.6nm in terms of peak-valley roughness. The UV irradiation caused the oxygen content of the UHMWPE film surface to increase. Water contact angle decreased from $83.2^{\circ}$ to $72.9^{\circ}$ and surface energy increased from 37.8 to 42.6mJ/$m^2$ with increasing UV energy. The surface energy change was attributed to significant contribution of polar component rather than nonpolar component indicating surface photooxidation of UHMWPE films. The increased dyeability to cationic dyes may be due to the photochemically introduced anionic and dipolar dyeing sites on the film surfaces.

연속식 오존처리공정을 이용한 낙동강 상수원수의 정수처리 효과 (Effect of Water Treatment for Nakdong River Raw Water by Continuous Ozone Process)

  • 임영성;강관호;이홍재;서동철;박문수;허종수;조주식
    • 한국환경농학회지
    • /
    • 제21권3호
    • /
    • pp.189-196
    • /
    • 2002
  • 낙동강 상수원수를 대상으로 연속적 오존처리에서 오존주입농도에 따른 유기물 분해 특성을 조사하기 위하여 오존처리에 의한 DOE성분변화, UV254/DOC의 변화와 소비오존에 따른 DOC 제거효율을 조사한 결과는 다음과 같다. 유입원수의 수질변화에 따라 다소 차이는 있었으나 전반적으로 오존주입농도가 증가할수록 DOC 처리효율도 증가되었다. 오존처리에 따른 DOC 성분변화는 전오존을 3 mg/L 농도로 처리시 TDOC, ADOC, A &BDOC 및 NRDOC는 각각 0.6, 0.2, 0.1 및 1.0 mg/L 정도 오존처리에 의하여 감소되었으나 BDOC는 0.8 mg/L 증가하였다. UV254/DOC의 분율은 오존주입농도를 1, 3 및 5 mg/L처리하였을 때 전오존의 경우는 각각 0.048, 0.044 및 0.037 이였고, 후오존의 경우는 각각 0.018, 0.015 및 0.012로 나타나 오존주입농도가 증가할수록 감소하는 경향을 보였다. 초기 DOC mg당 소비되는 오존량에 대한 DOC 제거율은 전오존과 후오존처리의 초기 DOC에 대한 소비오존량이 각각 약 1.5와 2.3일 때 각각 25%와 32%로 서 최대의 DOC 처리효율을 나타내었다. 낙동강 상수원수에 전오존을 처리할 경우 오존주입량은 초기 DOC mg당 소비된 오존이 1.5 mg 이내의 농도가 되도록 주입하구 후오존은 유입수인 모래여과수의 초기 DOC mg당 소비된 오존이 2.3 mg 이내의 농도가 되도록 조절하여 주입하면 적당할 것으로 생각되었다.

정수처리에서 서로 다른 공정의 처리효율에 대한 비교분석연구 (Efficiency Evaluation of Different Processes in Drinking Water Treatment)

  • 김형석;이병호
    • 상하수도학회지
    • /
    • 제25권4호
    • /
    • pp.597-604
    • /
    • 2011
  • This study was performed to compare finished water quality among three different processes. A detailed assessment of performance was carried out during the five months of operation. Finished water quality was evaluated on the basis of parameters such as Dissolved organic carbon (DOC), $UV_{254}$ absorbance, haloacetic acid formation potential (HAAFP), geosmin, 2-methylisoborneol (2-MIB), heterotrophic bacteria and total coliform bacteria. The treatment processes were Process 1 (coagulation-flocculation-sedimentation-sand filtration-ozone-GAC), Process 2 (coagulation-flocculation-sedimentation -microfiltration-ozone-GAC), and Process 3 (coagulation-flocculation-sedimentation- sand filtration-GAC), compared side by side in the pilot testing. Process 2 was found to have better removal efficiency of DOC, $UV_{254}$ absorbance, HAAFP and heterotrophic bacteria in comparison with process 1 and process 3 under identical conditions. Geosmin, 2-MIB and total coliform bacteria were not detected in finished water from each process.

잉크젯 기술자 표면처리 기술을 이용한 나노 실버 잉크 프린팅 (Printing of Nano-silver Inks with Ink-jet Technology and Surface Treatment)

  • 신권용;이상호;김명기;강희석;황준영;박문수;강경태
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
    • /
    • pp.104-105
    • /
    • 2007
  • In this study, characteristics of silver ink-jet printing were investigated under various substrate treatments such as substrate heating, hydrophobic coating, and ultraviolet(UV)/ozone soaking. Fluorocarbon(FC) film was spin-coated on the polyimide (PI) film substrate to obtain a hydrophobic surface. Although hydrophobicity of the FC film could reduce the diameter of the printed droplets, the singlet images printed on the FC film surface showed irregularities in the pattern size and the position of the printed droplet along with droplet merging phenomenon. The proposed UV/ozone soaking of the FC film improved the uniformity of the pattern size and the droplet position after printing and substrate heating was very effective way in preventing droplet merging. By heating of the substrate after UV/ozone soaking of the coated FC film, silver conductive lines of 78-116 ${\mu}m$ line were successfully printed at low substrate temperatures of $40^{\circ}C$.

  • PDF

UV/Ozone 조사에 의한 PTT 필름의 연속식 표면처리와 염색성 (Continuous Surface Treatment and Dyeability of PTT Film via $UV/O_3$ Irradiation)

  • 장진호;박대선
    • 한국염색가공학회지
    • /
    • 제17권1호
    • /
    • pp.7-13
    • /
    • 2005
  • Continuous and intense UV irradiation on PTT film using two types of UV bulbs at different irradiation power level was carried out to modify surface characteristics of the film including zeta potential, wettability, surface energy, and dyeability. ESCA analysis of the irradiated film showed higher O/C ratio than the untreated film indicating photooxidation of outer surface layer. ATR analysis showed that the ester bonds were broken and some new groups were produced such as carboxylic acid, phenolic hydroxy, and other esters, implying that ester bonds of PTT was responsible for the observed photooxidation effect. The surface of the treated PTT film became more hydrophilic and wettable to water, coupled with increased surface energy. Polar component of the surface energy increased and nonpolar component decreased with increasing irradiation energy. The treatment also decreased zeta potential of the modified surface and nanoscale roughness increased with increasing irradiation. The dyeability of the treated films to catonic dyes was significantly improved by electrostatic and polar interaction between dye molecules and the anionic film surface. The UV irradiation seems to be a viable polymer surface modification technology, which has advantages such as no vacuum requirement and continuous process unlike plasma treatment.

미세기포화 오존과 자외선, 초음파, 과산화수소를 이용한 돈분뇨 슬러리 고도처리 (Advanced Treatment of Piggery Slurry Using Micro Ozone Bubble, UV, Ultra Sonic and Hydroxy Peroxide)

  • 정광화;김재환;곽정훈;정만순;이광희
    • 한국축산시설환경학회지
    • /
    • 제15권3호
    • /
    • pp.209-216
    • /
    • 2009
  • 침전 및 고액분리 후 활성오니 공정 즉 분뇨 오수의 2차 처리공정까지를 거친 돈분뇨슬러리를 대상으로 하여 미세용존 오존 및 초음파와 자외선 그리고 과산화수소 등을 조합하여 적용한 고도처리 시험결과를 요약한 주요결과는 다음과 같다. 1. 돼지분뇨 오수 시료를 대상으로 하여 오존과 UV를 적용하였을 경우 전반적으로 색도와 오염성물질의 농도가 줄어드는 경향이 있었다. 2. 미세용존 오존을 이용하여 오존농도 $52\;g/Nm^3$ 조건에서 색도농도가 각기 다른 시료를 대상으로 하여 30분간 반응시켰을 경우 색도는 각각의 처리구 공히 처리시간의 경과에 따라 감소하는 결과를 보였다. COD를 포함한 오염성 물질의 농도도 처리시간의 경과에 따라 감소하였으며 자외선과 과산화수소 등 유기물질의 분해 및 산화력을 가진 물질의 첨가는 오존처리의 효율을 높이는 역할을 하였다. 3. 오존처리에 의해 처리수 중의 대장균과 살모넬라 수가 감소하였으며 과산화수소를 첨가할 경우 그 감소효과는 더 증가하였다는 경향이 있었다. 오존과 과산화수소수를 병합처리 하였을 경우에는 $7.5{\times}10^\;CFU/mL$ 이었던 살모넬라가 처리 후 10분 만에 10 CFU/L 이하로 낮아졌으며 20분 처리 후에는 오존과 과산화수소수를 병합한 처리구에서는 검출되지 않았다. 이 결과는 과산화수소의 짝염기인 ${HO_2}^-$가 OH 라디칼의 생성을 촉진함으로써 살모넬라 등의 세균감소 효과를 높인것에 기인한 것으로 판단된다.

  • PDF

붕소가 도핑된 다이아몬드전극을 이용한 폐수처리특성 (Characteristic of wastewater treatment using Boron-doped Diamond Electrode)

  • 이은주;영장 태명;등도 소;박수길
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
    • /
    • pp.795-798
    • /
    • 2003
  • Toxic organics are of great environmental concern primarily because they are toxic to mammals and birds, and are relatively soluble in water to contaminate surface water and groundwater. In this study, the decomposition of phenol, a widely used organic, in aqueous solutions by Boron doped diamond(BDD) electrode was examined. Thin, Boron-doped conducting diamond films are expected to be excellent electrodes for industrial electrolysis. Boron-doped diamond (BDD) were used as anode for generating ozone gas by electrolysis of acid solution. In this work. we have studied ozone generating system using BDD electrode. In order to determine the ozone generation properties of diamond electrode, experimental conditions, electrolyte concentration, temperature, flow rate and reaction time were varied diversely. As a result, we could confirm that ozone gas was generated successfully and the performance of diamond electrode was stable for electrolyte while $PbO_2$ electrode was disintegrated. Actually we are found that ozone amount increased by lowering the temperature of electrolyte. Decomposition of phenol concentration in the reaction solution by photolytic ozonation( $UV/O_3$) was analyzed by HPLC epuipped with a UV detector.

  • PDF

DOF(Dissolved Ozone Flotation) 시스템을 이용한 하수처리장 방류수의 고도처리에 대한 연구 (Advanced Secondary Wastewater Treatment Using the DOF (Dissolved Ozone Flotation) System)

  • 이병호;김상희
    • 상하수도학회지
    • /
    • 제19권6호
    • /
    • pp.767-774
    • /
    • 2005
  • The DOF (Dissolved Ozone Flotation) system was used to treat the effluent of the secondary wastewater treatment plant. The DOF system uses ozone instead of air, while DAF (Dissolved Air Flotation) uses air. Moreover, since the solubility of ozone is higher than air, the DOF system produces larger volume of micro-bubbles than the DAF system does. Thus, the DOF system performs better than the DAF system in floating ability. The DOF system could remove 70% of turbidity to an average of 0.59NTU in effluent from 2.31NTU in influent. The removal efficiency of absorbance measured with UV-254 in the effluent of the DOF system was 63%, while only 19% was removed by the DAF system. the DOF system removed 84% of the color from 25~26CU to 4CU, while DAF system removed 42% of the color to 15 CU. The CODMn removal efficiency of the DOF system was 34%, 6.8mg/l of effluent $COD_{Mn}$ concentratin, while it was 20%, 8.3mg/L of effluent $COD_{Mn}$ concentratin, to use the DAF system. Microbial bacteria such as coliform bacteria, and heterotrophic bacteria were removed over 99% by the DOF system, and 42~45% by the DAF system. That is, Microbial bacteria were almost completely destroyed by the DOF system. To sum up with, the DOF system was found to be very effective to treat effluent of the wastewater treatment plant.