• Journal of Astronomy and Space Sciences
• /
• v.26 no.4
• /
• pp.467-478
• /
• 2009

The super-geomagnetic storms called 2003 Halloween event globally occurred during the period of 29 through 31 which are the following days when the solar flares of X18 class exploded on 28 October 2003. The S4 index from GPS signal strength and the peak electron density ($NmF_2$) from GPS tomography method are analyzed according to the date. The occurrences of the cycle slip and scintillation in the GPS signals are 1,094 and 1,387 on 28 and 29 October, respectively and these values are higher than 604 and 897 on 30 and 31 October. These mean the ionospheric disturbances are not always generated by the period of geomagnetic storm. Therefore, GPS S4 index is useful to monitor the ionospheric disturbances. Behaviors of ionospheric electron density estimated from GPS tomography method are analyzed with the date. At UT = 18 hr, the maximum $NmF_2$ is shown on 28 October. It agrees with $NmF_2$ variation measured from Anyang ionosonde, and the GPS signal are better condition on 30 and 31 October than 28 October. In conclusion, GPS signal condition is relation with geomagnetic activities, and depend upon the variation of the electron density. We will study the long-term data to examine the relationship between the GPS signal quality and the electron density as the further works.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.4
• /
• pp.419-430
• /
• 2007

Purpose: This in vitro study evaluated shear bond strengths of surface treatment porcelains with four porcelain repair systems simulating intraoral bonding of composite resin to feldspathic porcelain or pressable porcelain. Material and methods: Eighty Porcelain disks were prepared. Group A: forty disk specimens were fabricated with Feldspathic Porcelain($Omega^{(R)}900$, Vident, Menlo Park, CA, USA). Group B: forty disk specimens were fabricated with Pressable Porcelain(IPS Empress 2 ingot, Ivoclar-Vivadent, Schaan, Liechtenstein, Germany). Each groups was divided into 4 subgroups and composite resin cylinders were bonded to specimen with one of the following four systems: Clearfil Porcelain Bond(L. Morita, Tustin, CA, USA), Ulradent Porcelain Etch. (Ultradent, Salt Lake City UT, USA), Porcelain Liner-M(Sun Medical Co., Kyoto, Japan), Cimara Kit(Voco, Germany). After surface conditioning with one of the four porcelain repair systems substrate surfaces of the specimen were examined microscopically(SEM). Shear bond strengths of specimens for each subgroup were determined with a universal testing machine (5mm/min crosshead speed) after storing them in distilled water at $37{\pm}1^{\circ}C$ for 24 hours. Stress at failure was measured in $MP_a$, and mode of failure was recorded. Differences among four repair systems were analyzed with two way ANOVA and Duncan test at the 95% significance level. Results: In the scanning electron photomicrograph of the treated porcelain surface, hydrofluoric acid etched group appeared the highest roughness. The shear bond strength of the phosphoric acid etched group was not significantly(p>0.05) different between feldspathic porcelain and pressable porcelain. But in no treatment and roughened with a bur group, the shear bond strength of the feldspathic porcelain was significantly higher than that of the pressable porcelain. In hydrofluoric acid etched group, the shear bond strength of the pressable porcelain was significantly higher(p<0.05). Conclusion: 1. Treatment groups showed significantly greater shear bond strengths than no treatment group(p<0.05). 2. Group with more roughened porcelain surface did not always show higher shear bond strengths. 3. In phosphoric acid etched group, there was no significant difference in shear bond strength between feldspathic porcelain and pressable porcelain(p>0.05). However in the other groups, there were significant differences in shear bond strengths between feldspathic porcelain and pressable porcelain(p<0.05).

• Composites Research
• /
• v.12 no.6
• /
• pp.74-82
• /
• 1999

The static and fatigue characteristics of polyurethane foam cored sandwich structures are investigated. Three types of the specimens with the glass fabric faces and the polyurethane foam core are used; non-stitched. stitched, and stiffened sandwich specimen. Especially additional structural reinforcements with the twisted polyester and glass fiber for thickness direction are made to stitched sandwich structure panel to minimize the delamination of structure which is stitched the upper and lower faces through the core and the resin is impregnated Into stitched fiber with the characteristics of low viscosity of resin at resin flow temperature and cured together with during the curing process. Bending strength of stitched specimen which is 50 mm $50{\times}50{\;}mm$ pitched is improved by 50 % as com-pared with non-stitched specimen and stiffened specimen is improved 10 times more than non-stitched structure. After fatigue testing of $10^6$cycles by 20% of ultimate load under monotonic load, the bending fatigue strength of non-stitched specimen is decreased by 27% of monotonic bending strength, 39% for stitched structure and 20% for stiffened specimen. To verify the aging effect of polyurethane form core, Ultrasonic C-scanning equipment is used to detect the damage of skin laminate alone after fatigue test. From results of UT C-scan images, there is no defect that can be damaged occurred during fatigue test. It is concluded that the decrease of bending strength for foam cored sandwich specimen is caused by the decrease of stiffness due to the aging of polyurethane foam core during fatigue cycles.

• The Journal of the Korea Contents Association
• /
• v.12 no.12
• /
• pp.345-355
• /
• 2012

Delayed treatment of acute cardiovascular and cereb-directrovascular diseases is related to poor prognosis and sequelae. For rapid and adequate treatment, role of prehospital emergency dispatchers for adequate triage and selection of hospital is important. In several advanced countries, emergency dispatchers use standardized protocols for decision of rescuer resources or distribution of patients at each hospital. ut, there has not been developed standardized protocol for emergency dispatchers in Korea. We developed standardized protocol based on NHS-direct and CTAS system for triage of symptoms of chest pain and Stroke. Groups with standardized protocol and without protocol was compared to triage result at emergency department which patient visited. The accuracy of triage on chest pain was 70.0% in group A, 94.0% in group B(p<0.01). The accuracy of triage in stroke symptoms was 64.2% in group A, 84.6% in group B(p<0.01). Conclusion: In this study, the accuracy of telephone triage with the protocol was more accurate than without the protocol. But, more studies are needed to generalize the protocol in South korea.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.3
• /
• pp.13-21
• /
• 1987

The object of this study was to evaluate the management alternatives with respect to the attainable water quality and total cost(construction+O & M cost) in order to devise a reasonable water quality management system. Joong Ryang-cheon stream located Seoul, Korea was taken as the study area, and dissolved oxygen concentration as the water quality index. Water quality simulation model QUAL2E and linear programming optimization technique were used for scientific and rational analyses. It was assumed that the improvement of water quality could be obtained by the treatment of major point sources where imaginary treatment plants were constructed. And by this, the relationship between total cost of the treatment plants and the stepwise improvement of water quality was studied. The result showed that 3.5mg/l of DO(=dissolved oxygen) level at best could be attained in Joong Ryang-cheon stream during summer. When the DO standard was set 3.0mg/l in the severely polluted regions, more than 5.0mg/l of DO level can be achieved by the construction of 4 treatment plants. Also, the cost comparisons showed that the uniform treatment method is economically inefficient(\$24.8{\times}10^8$) in comparison with the least cost method(\$22.9{\times}10^8$), and there is little difference between the least cost method and the the zoned treatment method(\$23.0{\times}10^8$) that is regarded as more equitable, which shows the characteristics of this basin.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.12-12
• /
• 2009

터빈에서 핵심부품인 로터는 블레이드를 원심 운동시키는 대형 단조강이며, 고압의 증기 조건에서 고속회전하며 고온에서 운전과 저온에서 과속시험 동안 높은 원심력을 받는다. 또한 기동/정지 천이 동안 열응력을 받기 때문에, 이러한 운전조건에 부합되는 소재로서는 높은 Creep 강도 및 피로강도를 가지는 CrMoV type의 강종이 사용되어져 왔다. 발전소의 대용량화 및 고온화에 따라 종래의 증기조건에서 사용되어져 왔던 1%CrMoV강은 내산화성 및 내부식성이 문제가 되어 더 이상 사용이 불가하며, 고온/고압하에서도 우수한 소재 특성을 가지는 12%Cr강의 사용이 필수적이다. 그러나 12%Cr강으로 제작되는 로타는 Cr 양이 높기 때문에 저널부에 Galling 또는 Scuffing 이라 불리는 부적절한 마모현상과 사용 중 소착이 발생하기 쉬운 단점이 있기 때문에, 저널부에 Cr 함유량 2~3% 이하의 저합금강을 오버레이 용접하여 육성하는 일체형 가공구조의 로타 저널부가 주목되어 왔다. 따라서 본 연구에서는 Large scale 로타가 용접 도중 급열 및 급냉이 되지 않으면서 균일한 온도로 일정 시간 유지할 수 있는 열관리 장치 개발, 최적 오버레이 용접조건 선정 및 용접부 건전성 시험 평가를 통하여 12%Cr 로타 저널부의 최적 오버레이 용접공정을 확립하고자 하였다. 용접 열관리 장치는 전기저항 가열방식을 적용하고 있으며 용접이 최종 완료되기 전까지 로타 제품 전체는 $93^{\circ}C$이상의 온도로 유지 되어져야 하며, 규정 용접후열처리 온도는 $650^{\circ}C{\pm}14^{\circ}C$ 이다. 또한 로타 오버레이 용접은 모재 Set up $\Rightarrow$ 용접예열 $\Rightarrow$ GTA용접 $\Rightarrow$ SA용접 $\Rightarrow$ 용접후열(Post heating) $\Rightarrow$ 용접후열처리(PWHT) $\Rightarrow$ 정삭가공 $\Rightarrow$ NDE(UT) 순으로 수행 되어진다 실제 로타의 1/3 Scale로 시험편을 제작하여, 오버레이 mockup 시험을 수행한 후 화학성분, 경도 분포, 인장강도, 충격인성 및 굽힘시험을 수행한 결과, 오버레이 용접에서 요구되어지는 용접 물성값을 만족하는 것으로 확인되었다. 또한 균열 등의 선형 결함이나 기공, 슬라그 혼입과 같은 결함은 관찰되지 않았으며, 용접 시 아크의 안정성과 슬라그의 박리성은 양호하였으며 비드의 외관도 미려하여 용접 작업성도 양호하였다.

• Radiation Oncology Journal
• /
• v.11 no.2
• /
• pp.205-217
• /
• 1993

In order to evalute the effects of radiation on mammalian neuronal system, we have examined the effect of gamma-ray radiation on the monoamine oxidase (MAO) activity in monoaminergic neurons. Following the whole body irradiation, MAO activity in the rat brain was measured as well as in the liver for the comparative studies between the neuronal and nonneuronal system. The effects of some radiation protectors and sensitizers were also examined in addition to the $O_2$ effect. The results can be summarized as follows. 1) The MAO activity of rat brain was minimally affected by the radiation dose up to 1,700 cGy Radiation dose above 2,500 cGy inhibited the brain MAO activity by no less than $l0\%.$ MAO-A form was found to be particularly sensitive to radiation. The liver MAO was somewhat inhibited (by about $5\%$) but hardly dependent on the dose of radiation. 2) The inhibitory effect on the brain was initiated immediately by the radiation dose of 2,500 cGy. On the contrary, for the liver, the inhibitory effect became apparent only 2 days after irradiation. 3) Two days after a dose of 2,500 cGy, Vmax and Km of the brain mitochondrial MAO decreased. For liver, Vmax decreased while Km increased, which indicates the kinetic patterns for the neuronal and nonneruronal systems are not affected similarly by radiation. 4) The effect of several known radiation protectors and sensitizers on MAO activity was tested ut no definite results were obtained. The level of -SH group increased in some degree upon radiation but not by the compounds. 5) MAO activity was not affected by $O_2$ concentration, while an elevated level of lipid peroxidase was found under the same condition. The results described here indicate that characteristics of MAO, one of the most important central nervous system enzymes, are liable to radiation, which is partially differentiated from the liver MAO. Also indicated are that the -SH groups are hardly related to the effect of radiation but the production of the lipid peroxide seems to be somewhat correlated to the effect of radiation.

• The Korean Journal of Food And Nutrition
• /
• v.15 no.1
• /
• pp.23-28
• /
• 2002

The inhibitory effects of persimmon leaves on th e mutagenicity in spore rec assay and on the growth of HT-29 human colon cancer cells and AZ-521 human gastric cancer cells were studied. Methanol extract of persimmon leaves inhibited the mutagenicity induced fly N-methyl- N'-nitro-N-nitrosoguanidine(MNNG) in spore rec assay. The hexane, chloroform and ethylacetate fraction from the methanol extract exhibited strong antimutagenicity against MNNG in spore rec assay The methanol extract of persimmon leaves also revealed the inhibitory effects on the growth of HT-29 human colon cancer cells and AZ-521 human gastric cancer cells. Among the solvent extracted fraction from the methanol extract, the chloroform fraction was most effective and inhibited the growth of HT-29 and AZ-521 cells by 100 percent.

• Horticultural Science & Technology
• /
• v.32 no.5
• /
• pp.739-743
• /
• 2014

This work characterizes 'Yeolha', a new strawberry (Fragaria ${\times}$ ananassa Duch.) cultivar that was released by the Highland Agriculture Research Center, RDA, in 2013. This cultivar originated from a 2008 cross between 'Goha' and 'Elsinyo' and showed excellent ever-bearing characteristics including continuous a flowering habit under long-day and high temperature conditions. It was originally named 'Saebong No. 5' after examining its characteristics and productivity in summer culture from 2010 to 2013. After two regional adaptability tests in 2012, it was selected as an elite cultivar and renamed 'Yeolha'. The general characteristics of 'Yeolha' include a semi-spreading plant type, elliptic leaves, and strong vigor in growth. Its fruit is conical and red. T he s oluble s olids content of 'Yeolha' is 8 .6%, w hich is 0.6% h ig her than t hat of 'Flamenco', b ut f ruit hardness is lower than that of 'Flamenco'. The average fruit weight of 'Yeolha' is about 12.1 g and the marketable yield is $28,133kg{\cdot}ha^{-1}$, which is 117% higher than that of 'Flamenco'. 'Yeolha' is resistant against Fusarium wilt. In addition, 'Yeolha' is suitable for four-season cultivation as a high harvesting cultivar because it shows continuous flowering under long-day and high temperature conditions.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.14 no.4
• /
• pp.253-259
• /
• 1981

A study was made to find out a new method of calculating the survival rate of a fish population from length composition and growth equation. 1. In the steady state of the fish population, let the total mortality rate be z, the age of complete recruitment a, the oldest age in the catch b and the average between the age of complete recruitment and the oldest age in the catch Ut, then we have $$U_{t}\;=\;\frac{a-b\;{e xp}\{-z(b-a)\}}{1-\;{e xp}\{-z(b-a)\}}+\frac{1}{z}{\cdots}{\cdots}{\cdots}{\cdots}{\cdots}$$(1) And let b be infinite, then we obtain $$Z=\frac{1}{U_t-a}{\cdots}{\cdots}{\cdots}{\cdots}{\cdots}{\cdots}$$ (2) 2. Calculating numerical value of $U_t$ from age composition table and growth equation, and substitute in (1) for it, we may obtain the value of z and $e^{-z}$. 3. This method is applied to a case of mackerel and horse mackerel in the coastal waters of Korea, with the following results : Total mortality rate-Mackerel : 0.87909, Horse mackerel : 2.22327, Survival rate-Mackerel : 0.41516, Horse Mackerel : 0.10825, 95 percent confidence Interval of survival rate-Mackerel : $0.35966{\sim}0.47264$, Horse mackerel : $0.06897{\sim}0.14974$