• Journal of Ocean Engineering and Technology
• /
• v.20 no.6 s.73
• /
• pp.108-113
• /
• 2006

For the past scores of years, our country has driven its land development toward economic growth as its top priority. ut, as a result that almost all developments been promoted excepting environmental values, in fact, they've incurred some bad environmental effects desirable. Especially, as representative examples, we can raise some issues such as damages of the foreshore or coast wet lands by seas reclamation, and coast corrosion by building up of rivers or coast constructions. Recently, many people started to have great interests in businesses of environment preservation or recycling to minimize effects of these environmental matters. However, before beginning public businesses of non-commercial goods relevant to the seas environments, there seemed to be some limitations that can not accomplish under consideration of environmental sides at the same time while performing economic validities and efficiencies with environmental economic analysis, which is already effective in countries advanced in environment, it's a very meaningful course in that citizens' opinions are being influenced in seas environmental policies for their efficient execution. In this research, after modeling coast corrosion preventives with Jeong-am coast of Gangwon Province, and using Contingent Valuation Method being widely used of value measuring methods on Non-commercial goods, we've appreciated environmental economy's validity of construction works and the scale of environmental economic value of beach restoration work.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.50.2-50.2
• /
• 2017

Spatial distribution of atmosphereless bodies in the solar system provides an important clue as to their origins, namely asteroids from Mainbelt or comets from outer solar system. It is, however, difficult to distinguish asteroids and dormant comets due to their similar appearances. In this study, we conducted a unique observation to differentiate asteroids and dormant comets in terms of 'polarimetry'. We observed (331471) 1984 QY1 (hereafter QY1) at large phase angles using the Multi-Spectral Imager (MSI) on the 1.6-m Pirka Telescope from UT 2016 May 25 to June 24. QY1 is a dormant comet candidate in terms of the dynamical properties (i.e. the Tisserand parameter with respect to Jupiter, TJ = 2.68). We analyzed the polarization degree of QY1 as a function of phase angle and found its maximum polarization degree, $Pmax=8.68{\pm}0.28%$ and $8.72{\pm}0.38%$, in RC-and V-band, respectively, around the phase angle of ${\alpha}=100^{\circ}$. In addition, we obtained the geometric albedo, $pV=0.16{\pm}0.02$ by means of an empirical slope-albedo law. The polarimetric properties and the albedo value we acquired are similar to those of S-type asteroids rather than cometary nuclei. In this presentation, we introduce our observation and findings. In addition, we further discuss a dynamical transportation process from Mainbelt to the current orbit.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.49.1-49.1
• /
• 2017

Comets are one of the most primordial solar system objects that hold the information of the early days of solar system formation inside their nuclei. Orbiting the Sun, they spew such ancient materials that have been buried for many years, creating dust and gas comae. Cometary dust grains absorb and scatter sunlight radiating the continuous light, while gas molecules form the line emissions. Eachof the comets has its own light patterns, which depends on the physical and chemical properties of the dust and gas components. In this regard, spectropolarimetrycan be a powerful tool to study the properties of cometary constituents free from contamination of each other. This methodology offers a series of information on the polarization degrees of the dust and gas components as well as on wavelength dependence of the polarization degree and polarization angle of cometary dust simultaneously. Herein, we will report the results of the spectropolarimetric study of comet 2P/Encke, which is one of the well-known objects for its shortest orbital period and its prominent aging signals. We performed a spectropolarimetric observation of comet 2P/Encke in its inbound orbit using the Higashi-Hiroshima Optical and Near-Infrared Camera (HONIR) at the Higashi-Hiroshima Observatory, Japan, on UT 2017 February 21 at high phase angle of =75.7 deg. Ourstudy of this interesting comet is the first and only one done through spectropolarimetry in a referred publication. We will discuss the most recent polarimetric results of our study in terms of 2P/Encke' scurrent evolutionary status.

• ALGAE
• /
• v.17 no.2
• /
• pp.83-87
• /
• 2002

Photosynthetic parameters of Scendesmus quadricauda, such as the maximum photosynthetic rate ($P_{max}$), photosynthetic efficiency (α) and the initial saturation intensity of irradiance for photosynthesis ($I_K$) were obtained using photosynthesis-irradiance (P-I) curve in a phosphorus-limited chemostat. S. quadricauda exhibitied no photoinhibition until at 200 μmol·$m^{-2}$ . $P_{max}$ (r=0.963, P=0.002) and $I_K$(r=0.904, P=0.013) showed linear relationships with growth rate. Chlorophyll-α concentration and cell dry weight decreased at higher growth rates, ut chlorophyll-α content per cell dry weight increased. The increase in photosynthetic rates at higher growth rates was due to the increase of $P_{max}$ and $I_K$ which was caused mainly by the increase in the absolute amount of chlorophyll-α rather than the increased photosynthetic efficiency of individual chlorphyll-α. The α did not show a significant relationship with growth rate (r=0.714, P=0.111). The cell quota of carbon (r=0.554, P=0.254) was not correlated with growth rate, but cell quota of nitrogen (r=0.818, P=0.047) and phosphorus (r=0.855, P=0.030) exhibited linear correlations with growth rate.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.56-56
• /
• 2010

최근 강구조물의 건설이 지속적으로 증가되어 왔다. 또한 강구조물의 유지관리 및 안전성에 대한 관심이 급증하고 있다. 시설물의 안전성 확보는 대형사고의 사전 예방, 공용 중 갑작스런 가동 중지에 의하여 발생되는 비용증가를 사전에 차단 할 수 있다는 점에서 그 중요성은 매우 크다고 할 수 있다. 또한 각종 구조물은 열악한 사용조건, 고온, 고압, 고속, 대형화됨에 따라 일단 사고가 발생 했을 경우 대형사고의 위험이 예상되므로, 제작시 검사의 강화뿐만이 아니라 공용 중 구조물의 안전성을 진단 할 수 있는 모니터링 체계의 확립이 필요한 시점이다. 현재 국내에서 강구조물들의 균열 모니터링 시스템에 관한 연구는 매우 미흡한 실정이며, 현재 사용되고 있는 비파괴검사 방법은 UT와 RT등이다. 이러한 방법들은 많은 시간과 경비가 소요되며 또한 거대구조물 혹은 사람의 접근이 어려운 곳에는 적용하기가 힘들다. 또한 주기적인 검사 작업으로 인한 막대한 시간과 비용의 손실이 발생되고 있으며 초기 결함을 조기에 인지하지 못함으로써 적절한 보수 보강 대책이 이루어지지 않아 보수 보강 비용의 증대를 초래한다. 더욱이, 결함이 진전된 이후에도 이것을 인지하지 못하여 적절한 대응을 하지 않는다면 대형사고로 이어질 수도 있다. 따라서 강구조물에 대한 효율적인 유지관리가 가능하고, 초기결함으로부터 균열이 진전하여 붕괴되는 사고를 미연에 방지하며 초기에 보수보강 작업을 수행함으로써 보수보강 비용도 절감 할 수 있는 모니터링 시스템의 개발이 요구되고 있다. 이러한 모니터링 시스템의 개발은 기술적 측면에서 강구조물의 효율적인 유지 관리 노하우를 얻을 수 있으며 경제 산업적 측면에서는 보수 보강 비용 및 불필요한 주기적 점검 비용을 절감 할 수 있다. 이 연구에서는 전위차법을 이용하여 강구조물의 필렛 용접부에서의 균열진전양상을 파악하고 정량화를 통해 필렛용접부의 잔여수명을 예측하였다.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.51.1-51.1
• /
• 2010

We report an example of Pi2 pulsation exhibiting different frequency between dawn and dusk. This Pi2 pulsation occurred around 1932 UT on February 14, 2008, and was observed at low-latitude Bohyun (BOH, L = 1.35, MLT = 3.8) and Hermanus (HER, L = 1.83, MLT = 20.1) stations. The pulsation starts simultaneously at both stations but the frequency is higher at BOH than at HER. At the time of the Pi2, THEMIS-A (THA) and THEMIS-D (THD) were on dawn (L = 2.9, MLT = 5.3) and dusk (L = 2.8, MLT = 18), respectively, in the inner magnetosphere. We find a nearly identical waveform and period between THA ${\delta}Bz$ and BOH ${\delta}H$ and between THD ${\delta}Bz$ and HER ${\delta}H$ with a near $0^{\circ}$ phase delay. This observation implies that Pi2-associated fastmode wave in the inner magnetosphere is not excited globally as a single frequency at all longitudes. We suggest that the different frequency between dawn and dusk is due to dawn-dusk asymmetry of the plasmasphere.

• Journal of the Korean housing association
• /
• v.24 no.1
• /
• pp.21-31
• /
• 2013

This study focuses on the regional characteristics observed in the composition and floor plan of folk houses in the Young-cheon region situated in the Southern East inland of Gyungsangbukdo. According to the typical characteristics of the Korean folk house, Young-cheon region is supposed to be classified as the Young-Nam region. Our study shows that the open inverse 'ㄱ' type composition is the most common among others, which consists the living room, UtChae and one BoosokChae that serves as a living room and a farm shop. The typical floor plan is called 'Young Nam type' 'H$\hat{o}$tjib' composed of four rooms. Young Nam type of house has a wall in front of the room floor with a door to make the space with the room floor as the internal space. This can be explained by the climatic conditions in the Southern region of Gyungsangbukdo, which has a very cold winter and has a harsh spring wind in Young-cheon. The structural feature to which we should pay attention is the Young Nam type house has a gambrel roof. The evolutions of the house in the 70s are observed in the roof during the Saemaeul Movement from a hut to a modernized roof. In the 80s, the replacement of the heating system, expansion of rooms, modernization of kitchen, replacement of paper windows, modernization of roof, and construction of amenities had taken place to change the space, construction and structure following the modern house features.

• Journal of Acupuncture Research
• /
• v.20 no.1
• /
• pp.144-158
• /
• 2003

This study was carried out to investigate what kinds of statistical techniques have been used to analyze data from oriental medicine research, For study, 551 original articles which used statistical techniques in their data analysis were selected form the articles published in The journal of Korean Acupuncture & Moxibustion Society(JKAMS) between 1984 to 2002. among them, 122 articles used descriptive statistics while 429 articles used inferential statistics for data analysis. For that 429 articles, t-test (189 articles), analysis fo variance (111 articles), chi-square test (14 articles), correlation (10 articles), regression analysis (4 articles), factor analysis(5 articles), or nonparametric test (23 articles) were chose to analyze the data. Nonparametric approach has substantial power in case data do not meet the assumption of normality. This method is not only easy to use ut also provides measures of the statistical variation of nominal and ordinal scale. This study shows that more and more recent papers use nonparametric test compared to the old articles. nine different statistical software or packages (SAS, SPSS, Statview, Minitab, Sigma plot, ISP, Graphpad prism, Excel, Access) have been used in the articles published JKMAS. High level statistical techniques such as SAS, SPSS, and Statview are user friendly and used most for acupuncture and Moxibustion research. Including tables and plots in an article facilitates understanding family process data from a descriptive standpoint, minimized erroneous statistical conclusions, and clarifies theoretically important relationships among variables. Table and plots have been used 500 and 233 articles, respectively. A computer procedure is proposed and illustrated with statistical packages using SAS, SPSS, Statview and ISP.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.250-255
• /
• 2000

Damage induced by low velocity impact loading in aircraft composite laminates is the form of failure which is occurred frequently in aircraft. Low velocity impact can be caused either by maintenance accidents with tool drops or by in-flight impacts with debris. As the consequences of impact loading in composite laminates, matrix cracking, delamination and eventually fiber breakage for higher impact energies can be occurred. Even when no visible impact damage is observed, damage can exist inside of composite laminates and the carrying load of the composite laminates is considerably reduced. The reduction of strength and stiffness by impact loading occurs in compressive loading due to laminate buckling in the delaminated areas. The objective of this study is to determine inside damage of composite laminates by impact loading and to determine residual compressive strength and the damage growth mechanisms of impacted composite laminates. For this purpose a series of impact and compression after impact tests are carried out on composite laminates made of carbon fiber reinforced epoxy resin matrix with lay up pattern of $[({\pm}45)(0/90)_2]s$ and $[({\pm}45)(0)_3(90)(0)_3({\pm}45)]$. UT-C scan is used to determine impact damage characteristics and CAI(Compression After Impact) tests are carried out to evaluate quantitatively reduction of compressive strength by impact loading.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.2
• /
• pp.202-208
• /
• 2001

A Switched Reluctance Motor(SRM) has double salient poles structure and the phase windings are wound in stator. SRM hase more simple structure that of other motor, thus manufacture cost is low, mechanically strong, reliable to a poor environment such as high temperature, and maintenance cost is low because of brushless. SRM needs position detector to get rotator position information for phase excitation and tachometer or encoder for constant speed operation. But, this paper doesn\`s use an encoder of high cost for velocity measurement of rotator. Instead of it, the algorithm for position detection and velocity estimation from simple slotted disk has been proposed and developed. To implement variable speed digital control system with velocity estimation algorithm, the TMS320F240-20MIPS fixed point arithmetic processor of TI corporation is used. The experimental results of the developing system are enable to control speed with wide range, not only single pulse, hard chopping mode and soft chopping, ut also variable speed control, and advance angle control.