• Physical Therapy Korea
• /
• v.24 no.1
• /
• pp.61-70
• /
• 2017

Background: Scapular winging is a prominence of the entire scapular medial border, mainly caused by insufficient activity of the serratus anterior (SA) and imbalance of scapulothoracic muscles. Push-up plus (PUP) exercise has been commonly used to increase SA muscle activity. The facilitation of abdominal muscle may affect scapular muscle activity by myofascial connections. Thus, the sequential activation of the turnk muscles is suggested to facilitate the transition of proper force from upper limb and restore force couple of scapular muscles. The abdominal drawing-in maneuver (ADIM) has been effective in improving activation of the deep trunk muscles during movement. Objects: The aim of this study was to determine the effect of ADIM on the activity of the upper trapezius (UT), lower trapezius (LT), and SA during PUP exercises in subjects with scapular winging. Methods: Fourteen men with scapular winging (determined as a of distance between the scapular medial border and thoracic wall over 3 cm) volunteered for our study. The subjects performed the PUP exercise with and without ADIM. Surface electromyography was used to collect the electromyography data of the UT, LT, and SA. A scapulometer was used to measure the amount of scapular winging. Results: SA activity was significantly greater and scapular winging significantly lower during the PUP exercise with ADIM than during those without ADIM. Conclusion: PUP exercise with ADIM can be used as an beneficial method to improve SA activation and to reduce the amount of scapular winging in subjects with scapular winging.

• Journal of the Korea Convergence Society
• /
• v.9 no.2
• /
• pp.91-99
• /
• 2018

The aim of this study was to investigate the short-term effects of combined postural correction exercises (CPCE) on muscle stiffness and muscle activity in children with cerebral spastic diplegia(CSD). The subjects were 3 children (2 male and 1 female) with CSD from 4 to 7 years old. The measurement sites were upper trapezius muscle(UT), rectus abdominis muscle(RA), and gluteus maximus muscle(Gmax), muscle stiffness and muscle activity were measured using Myoton and surface EMG, and the symmetry of both sides was also examined. As a result, children with severe compensatory action showed decreased muscle stiffness and muscle activity in UT and RA and increase in Gmax after CPCE intervention. Especially, the left and right symmetry of the muscles was decreased. In this study, despite some limitations, CPCE have shown a positive effect in posture correction of children with CSD.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2005.05a
• /
• pp.216-227
• /
• 2005

The head penetrations for control rod drive mechanism and instrumentation systems are installed at the reactor pressure vessel head of PWRs. Primary coolant water and the operating conditions of PWR plants can cause cracking of these nickel-based alloy through a process called primary water stress corrosion cracking (PWSCC). Inspection of the head penetrations to ensure the integrity of the head penetrations has been interested since reactor coolant leakages were found at U. S. reactors in 2000 and 2001. The complex geometry of the head penetrations and the very low echo amplitude from the fine, multiple flaws due to the nature of the see made it difficult to detect and size the flaws using conventional pulse-echo UT methods. Time-of-flight-diffraction technique, which utilizes the time difference between the flaw tips while pulse-echo does the flaw response amplitude from the flaw, has been selected for this inspection for it's best performance of the detection and sizing of the head penetration see flaws. This study defines the limits of the detectable and accurately sizable minimum flaw size which can be detected by the General TOFD and the Delta TOFD techniques for circumferentially and axially oriented flaws respectively. These results assures the reliability of the inspection techniques to detect and accurately size for various kind of flaws, and will also be utilized for the future development and qualifications of the TOFD techniques to enhance the detecting sensitivity and sizing accuracy of the flaws of the reactor head penetrations in nuclear power plants.

• Korean Journal of Food Science and Technology
• /
• v.36 no.2
• /
• pp.262-267
• /
• 2004

Processed foods were developed using amaranth starch and flours. Amaranth seeds were untreated (UT), defatted (DF), germinated (GM), roasted (RT), popped (POP), and extruded (EX1 and EX2). Amaranth flours showed A-type pattern on X-ray diffractograms, while crystallinity was not observed in POP, EX1, and EX2. POP and EX1 showed highest (740.3%) and lowest (38.5%) water-binding capacities, respectively. Transmittances of RT, POP, EX1, and EX2 flour suspensions were higher than those of others. Transmittance of amaranth starch and flours differed with processing methods. RT, POP, EX1, and EX2 showed higher transmittance at $60^{\circ}C$. Initial pasting temperature of amaranth flours by RVA were $68.1-73.0^{\circ}C$, and peak viscosities of GM and RT were 31.6 and 401.1 RVU, respectively. Melting endotherms of POP, EX1, and EX2 were not observed in DSC thermograms.

• Biomolecules & Therapeutics
• /
• v.25 no.3
• /
• pp.308-314
• /
• 2017

Urotensin II (UII) is a mitogenic and hypertrophic agent that can induce the proliferation of vascular cells. UII inhibition has been considered as beneficial strategy for atherosclerosis and restenosis. However, currently there is no therapeutics clinically available for atherosclerosis or restenosis. In this study, we evaluated the effects of a newly synthesized UII receptor (UT) antagonist, KR-36996, on the proliferation of SMCs in vitro and neointima formation in vivo in comparison with GSK-1440115, a known potent UT antagonist. In primary human aortic SMCs (HASMCs), UII (50 nM) induced proliferation was significantly inhibited by KR-36996 at 1, 10, and 100 nM which showed greater potency ($IC_{50}$: 3.5 nM) than GSK-1440115 ($IC_{50}$: 82.3 nM). UII-induced proliferation of HASMC cells was inhibited by U0126, an ERK1/2 inhibitor, but not by SP600125 (inhibitor of JNK) or SB202190 (inhibitor of p38 MAPK). UII increased the phosphorylation level of ERK1/2. Such increase was significantly inhibited by KR-36996. UII-induced proliferation was also inhibited by trolox, a scavenger for reactive oxygen species (ROS). UII-induced ROS generation was also decreased by KR-36996 treatment. In a carotid artery ligation mouse model, intimal thickening was dramatically suppressed by oral treatment with KR-36996 (30 mg/kg) which showed better efficacy than GSK-1440115. These results suggest that KR-36996 is a better candidate than GSK-1440115 in preventing vascular proliferation in the pathogenesis of atherosclerosis and restenosis.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.1
• /
• pp.45-52
• /
• 2016

Blast furnaces are crucial equipment for steel production. A typical furnace risks unexpected accidents caused by contraction and expansion of the walls under an environment of high temperature and pressure. In this study, an acoustic emission (AE) monitoring system was tested for evaluating the large-scale structural health of a blast furnace. Based on the growth of shell cracks with the emission of high energy levels, severe damage can be detected by monitoring increases in the AE energy parameter. Using this monitoring system, steel mill operators can establish a maintenance period, in which actual shell cracks can be verified by cross-checking the UT. From this study, we expect that AE systems permit early fault detection for structural health monitoring by establishing evaluation criteria based on the severity of shell cracking.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.2
• /
• pp.153-169
• /
• 2018

A submarine has a pressure hull that can withstand high hydraulic pressure and therefore, requires the use of highly advanced shipbuilding technology. When producing a pressure hull, periodic inspection, repair, and maintenance are conducted to maintain its soundness. Of the maintenance methods, Non-Destructive Testing (NDT) is the most effective, because it does not damage the target but sustains its original form and function while inspecting internal and external defects. The NDT process to detect defects in the welded parts of the submarine is applied through Magnetic particle Testing (MT) to detect surface defects and Ultrasonic Testing (UT) and Radiography Testing (RT) to detect internal defects. In comparison with RT, UT encounters difficulties in distinguishing the types of defects, can yield different results depending on the skills of the inspector, and stores no inspection record. At the same time, the use of RT gives rise to issues related to worker safety due to radiation exposure. RT is also difficult to apply from the perspectives of the manufacturing of the submarine and economic feasibility. Therefore, in this study, the Phased Array Ultrasonic Testing (PAUT) method was applied to propose an inspection method that can address the above disadvantages by designing a probe to enhance the precision of detection of hull defects and the reliability of calculations of defect size.

• Physical Therapy Rehabilitation Science
• /
• v.9 no.4
• /
• pp.302-308
• /
• 2020

Objective: The endurance and strength of deep neck flexor (DNF) muscles have a major role on the function and stability of the cervical spine. In recent years, there has been a lack of research that have investigated the muscle tone of the superficial neck muscles. The purpose of this study was to examine the relationship of between contraction ratio of the DNF and sternocleidomastoid (SCM) muscles, DNF endurance, and muscle tension of the neck muscles. Design: Cross-sectional study. Methods: Forty-seven subjects (male=20, female=27) participated in this study. The muscle tone of the upper trapezius (UT), SCM, and suboccipital (SO) muscle was measured using a contact soft tissue tone-measuring instrument. For the contraction ratio of the SCM and longus colli muscle, the thickness of the relaxation and maximum contraction state of the SCM and longus colli muscles were assessed using a diagnostic ultrasound measuring instrument and a pressure biofeedback unit. The deep neck flexor endurance test (DNFET) was performed in a cranio-cervical flexion posture. The correlations between the measured variables were investigated. Results: The relationship between the DNFET and SO tone showed a significant negative correlation (p<0.05). The relationship between the DNFET and contraction ratio showed a significant positive correlation (p<0.01). There was no significant correlation between the DNFET and SCM and UT tone. Conclusions: This study confirmed that there is a relationship between DNF endurance, DNF activation, and SO tone. The information on the results of this study may be used as a reference that can be actively applied in the clinical environment.

• The Journal of Advanced Prosthodontics
• /
• v.10 no.6
• /
• pp.408-414
• /
• 2018

PURPOSE. This study aimed to assess the effect of non-thermal plasma on the shear bond strength of resin cements to polyetherketoneketone (PEKK) in comparison to other surface treatment methods. MATERIALS AND METHODS. Eighty PEKK discs were subjected to different surface treatments: (1) Untreated (UT); (2) Non-thermal plasma (NTP); (3) Sandblasting with $50{\mu}m$ $Al_2O_3$ particles (SB); and (4) Sandblasting + Non-thermal plasma (SB+NTP). After each surface treatment, the contact angle was measured. Surface conditioning with Visio.Link was applied in all groups after pre-treatment. RelyX Unicem resin cement was bonded onto the PEKK specimens. After fabrication of the specimens, half of each group (n=10) was initially tested, while the other half was subjected to thermocycling ($5^{\circ}C$ to $55^{\circ}C$ at 10,000 cycles). Shear bond strength (SBS) testing was performed using a universal testing machine, and failure modes were assessed using stereomicroscopy. The SBS results were analyzed statistically using one-way ANOVA followed by Tukey's post hoc test. Independent t-test was used to examine the effect of thermocycling (P<.05). RESULTS. The highest SBS values with or without thermocycling were observed with PEKK specimens that were treated with SB+NTP followed by the SB group. The lowest SBS results were observed in the UT groups. CONCLUSION. The shear bond strength between PEKK and resin cements was improved using non-thermal plasma treatment in combination with sandblasting.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.53.2-53.2
• /
• 2019

$H{\alpha}$ surges (i.e. cool/dense collimated plasma ejections) may act as a guide for a propagation of magnetohydrodynamic waves. We report a high-resolution observation of a surge observed with 1.6m Goody Solar Telescope (GST) on 2009 August 26, from 18:20~UT to 18:45UT. Characteristics of plasma motions in the surge are determined with the normalizing radial gradient filter and the Fourier motion filter. The shape of the surge is found to change from a 'C' shape to an inverse 'C' shape after a formation of a cusp, a signature of reconnection. There are apparent upflows seen above the cusp top and downflows below it. The upflows show rising and rotational motions in the right-hand direction, with the rotational speed decreasing with height. Near the cusp top, we find a transverse oscillation of the surge, with the period of ~2 min. There is no change of the oscillation phase below the cusp top, but above the top a phase change is identified, giving a vertical phase speed about 86kms-1. As the height increases, the initial amplitude of the oscillation increases, and the oscillation damping time decreases from 5.13 to 1.18min. We conclude that the oscillation is a propagating kink wave that is possibly excited by an x-point oscillation.