• 한국해양공학회지
• /
• 제36권5호
• /
• pp.340-352
• /
• 2022

This article presents a modeling method for the uncorrelated measurement error of the ultra-short baseline (USBL) acoustic positioning system for aiding navigation of underwater vehicles. The Mahalanobis distance (MD) and principal component analysis are applied to decorrelate the errors of USBL measurements, which are correlated in the x- and y-directions and vary according to the relative direction and distance between a reference station and the underwater vehicles. The proposed method can decouple the radial-direction error and angular direction error from each USBL measurement, where the former and latter are independent and dependent, respectively, of the distance between the reference station and the vehicle. With the decorrelation of the USBL errors along the trajectory of the vehicles in every time step, the proposed method can reduce the threshold of the outlier decision level. To demonstrate the effectiveness of the proposed method, simulation studies were performed with motion data obtained from a field experiment involving an autonomous underwater vehicle and USBL signals generated numerically by matching the specifications of a specific USBL with the data of a global positioning system. The simulations indicated that the navigation system is more robust in rejecting outliers of the USBL measurements than conventional ones. In addition, it was shown that the erroneous estimation of the navigation system after a long USBL blackout can converge to the true states using the MD of the USBL measurements. The navigation systems using the uncorrelated error model of the USBL, therefore, can effectively eliminate USBL outliers without loss of uncontaminated signals.

• 한국해양공학회지
• /
• 제38권3호
• /
• pp.115-123
• /
• 2024

USBL systems are essential for providing accurate positions of autonomous underwater vehicles (AUVs). On the other hand, the accuracy can be degraded by outliers because of the environmental conditions. A failure to address these outliers can significantly impact the reliability of underwater localization and navigation systems. This paper proposes a novel outlier rejection algorithm for AUV localization using Voronoi diagrams and query point calculation. The Voronoi diagram divides data space into Voronoi cells that center on ultra-short baseline (USBL) data, and the calculated query point determines if the corresponding USBL data is an inlier. This study conducted experiments acquiring GPS and USBL data simultaneously and optimized the algorithm empirically based on the acquired data. In addition, the proposed method was applied to a sensor fusion algorithm to verify its effectiveness, resulting in improved pose estimations. The proposed method can be applied to various sensor fusion algorithms as a preprocess and could be used for outlier rejection for other 2D-based location sensors.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.204-209
• /
• 2004

It is well known fact that acoustic positioning systems are absolutely needed for various underwater operations. According to the distances between their sensors they are classified into three parts: long baseline(LBL), short baseline(SBL), and ultra-short baseline(USBL). Among them the USBL system is widely used because of its simplicity, although it is the most inaccurate. Recently, in order to increase the positioning accuracy, various USBL systems using broadband signal such as MFSK(Multiple Frequency Shift Keying) are produced. However, their positioning accuracy is still limited by background noise and reflected waves. Therefore, there is difficulty in applying the USBL system using MFSK signal in a shallow water with noisy conditions. In order to examine the effect of the noise and wave reflections this paper analyze position errors for various conditions using numerical simulations. The simulation results say that tile SNR must be greater than 20dB and errors in the vertical direction are slightly increased by wave reflections by upper and lower boundaries.

• 한국해양공학회지
• /
• 제31권4호
• /
• pp.315-323
• /
• 2017

This paper presents an integrated navigation system that combines ultra-short baseline (USBL), Doppler velocity log (DVL), and heading measurements for a deep-sea remotely operated vehicle, Hemire. A navigation model is introduced based on the kinematic relation of the position and velocity. The system states are predicted using the navigation model and corrected with the USBL, DVL, and heading measurements using the Kalman filter. The performance of the navigation system was confirmed through re-navigation simulations with the measured data at the Southern Mariana Arc submarine volcanoes. Based on the characteristics of the measurements, the design process for the parameters of the system modeling error covariance, measurement error covariance, and initial error covariance are presented. This paper reviews the influence of the outliers and blackout of the USBL and DVL measurements, and proposes an outlier rejection algorithm that is robust to USBL blackout. The effectiveness of the method is demonstrated with re-navigation for the data that includes USBL blackouts.

• 한국군사과학기술학회지
• /
• 제3권1호
• /
• pp.85-91
• /
• 2000

Underwater sensor accuracy test which measures the detection range and bearing accuracies of sonar simulates sonar transmitting ping and underwater radiating noise of target vessels. In this test, because the position of sonar target is the reference position of test, the sonar target position should be precisely estimated. Hence, this paper suggests to apply USBL algorithm which adopts cross phase spectrum of received sensor signals, and presents its performance by range and bearing estimation simulations. As a result of simulations, suggested algorithm shows good accuracy for underwater sensor accuracy test near 5㏈ SNR.

• 한국정보통신학회논문지
• /
• 제10권11호
• /
• pp.1973-1977
• /
• 2006

본 논문에서는 IMU(Inertial Motion Unit), DVL(Doppler Velocity Log), USBL(Ultra Short Base Line) DGPS(Differential Global Positioning System) 등의 센서로부터 취득된 데이터를'융합하여 ROV(Remotely Operated Vehicle)와 AUV(Autonomous Underwater Vehicle)와 같은 수중체의 위치를 지구 전체영역에서 추정하기 위한 기본적인 알고리즘을 다루고 있다. 본 논문에 소개된 알고리즘은 6,000m급 과학 조사용 심해무인잠수정인 해미래[1]의 수중 위치추적에 사용될 예정이다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.249-256
• /
• 2004

KRISO/KORDI is currently developing a deep-sea unmanned underwater vehicle (UUV) system which is composed of a launcher, an ROV, and an AUV. Two USBL acoustic positioning systems will be used for UUV's navigation. One is for the deep sea positioning of all three vehicles and the other is for AUV's guidance to the docking device on the launcher. In order to increase the position accuracy MFSK(Multiple Frequency Shift Keying) broadband signal will be used. As the first step to the implementation of a USBL system, this paper studies USBL positioning algorithm using MFSK signals. Firstly, the characteristics of MFSK signal is described with various MFSK parameters: number of frequencies, frequency step, center frequency, and pulse length. Time and phase delays between two received signals are estimated by using cross-correlation and cross-spectrum methods. Finally an USBL positioning algorithm is derived by converting the delays to difference of distances and applying trigonometry. The simulation results show that the position accuracy is improved highly when both cross-correlation and cross-spectrum of MFSK signals are used simultaneously.

• International Journal of Ocean System Engineering
• /
• 제1권2호
• /
• pp.60-67
• /
• 2011

This paper presents an in-situ correction method to compensate for the position error of an autonomous underwater vehicle (AUV) near the sea floor. AUVs generally have an inertial navigation system assisted with auxiliary navigational sensors. Since the inertial navigation system shows drift in position without the bottom reflection of a Doppler velocity log, external acoustic positioning systems, such as an ultra short baseline (USBL), are needed to set the position without surfacing the AUV. The main concept of the correction method is as follows: when the AUV arrives near the sea floor, the vehicle moves around horizontally in a circular mode, while the USBL transceiver installed on a surface vessel measures the AUV's position. After acquiring one data set, a least-square curve fitting method is adopted to find the center of the AUV's circular motion, which is transferred to the AUV via an acoustic telemetry modem (ATM). The proposed method is robust for the outlier of USBL, and it is independent of the time delay for the data transfer of the USBL position with the ATM. The proposed method also reduces the intrinsic position error of the USBL, and is applicable to the in-situ calibration as well as the initialization of the AUVs' position. Monte Carlo simulation was conducted to verify the effectiveness of the method.

• 한국음향학회지
• /
• 제43권1호
• /
• pp.89-94
• /
• 2024

Ultra-Short BaseLine(USBL) 은 센서 간격이 좁은 배열을 사용하기 때문에 위치 추정 성능 향상을 위해서는 정밀한 동기화가 필요하다. 그러나 수중 환경은 비교적 강한 잡음과 다중 경로 및 도플러 등의 수중 음향 채널로 인해 동기화 오류가 발생하여 위치 추정 성능이 저하된다. 본 논문에서는 수중 USBL 시스템의 위치 추정 성능을 향상시키기 위한 공분산 기반 동기 보상 기법을 제안한다. 제안 방법은 상호상관을 통해 신호를 정렬한 후, 정렬된 신호의 공분산을 계산한다. 공분산에서 동기 오차는 위상차와 선형적으로 관련되어 있으므로 위상차를 공분산으로부터 추정하여 동기 오차를 보상한다. 전산 모의실험을 통해 제안 방법이 기존 상호상관 방법보다 우수한 위치 추정 성능을 가지는 것을 보였다.

• 동력기계공학회지
• /
• 제12권2호
• /
• pp.48-54
• /
• 2008

Underwater wet arc welds of rolled steel plate (SM41) where studied welding and mechanical properties macro and narrow than that of the other things. Tensile strength of UWEB obtained to 521.5 MPa and of USBL was 524.1 MPa, but the highest elongation value was 4.68 %(UWEB). Bending strength(1166.6 MPa) of USBL is the largest and of UWEB in 1047 MPa, But deflection(22.73 mm) of UWEB in large than that of USBL(22.63 mm). Impact value(144.36 $J/cm^2$) of JPUW is the largest and of UWEB(140 $J/cm^2$) come after.