• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.9
• /
• pp.789-800
• /
• 2014

In this paper, we propose a cooperative protocol of relay-based WUSB/DRD and WLP device in WSS of ship area WiMedia environment. For this purpose, we investigate a RNT table configuration and algorithm of RNS relay node used in relay-based cooperative communication. Then, we describe a device that makes up WLP network and propose a cooperative protocol for WUSB/DRD/WLP device communication. The proposed cooperative protocol can communicate with WUSB/DRD/WLP devices by using standard DRP reservation and WUSB DRP reservation.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.263-264
• /
• 2008

고속 무선 PAN(Personal Area Networks)기술은 10m 이내의 짧은 거리에서 고속으로 대용량의 데이터를 전송하기 위한 기술로, 최근 무선 USB(Wireless Universal Serial Bus)나 HDTV(High Definition TV)와 같은 광대역 멀티미디어 응용 시장을 겨냥한 연구가 IEEE 802.15.3과 WiMedia를 중심으로 활발히 진행되고 있다. [1] 본 논문에서는 WiMedia Alliance에서 제안한 Distributed Medium Access Control (D-MAC)에서 다수 스트림의 QoS 요구를 만족시키는 신뢰성 있는 전송을 위해 데이터 시간 슬롯을 효율적으로 할당하는 알고리즘에 대해 연구하고자 한다.

• Journal of IKEEE
• /
• v.13 no.3
• /
• pp.7-17
• /
• 2009

WiMedia UWB technology is a fully distributed data communication technology developed for the application demanding a high data transmission rate in the wireless PAN area. In general, devices can send data either by reserving time slots or by using prioritized CSMA/CA. If the PCA protocol of prioritized CSMA/CA is used, they are suffered congestion as the number of devices increases. In this paper, we propose a Deterministic Access Protocol(DAP) in WiMedia WPANs. A DAP is a method to transmit data in the non-reserved DRP period without competition as each device informs the beacon order information in the beacon period and the queue information. In addition, the problem that the devices with a lower beacon slot number have more transmission opportunities is addressed by introducing the reference point. Simulation results are given to demonstrate that a DAP can improve the throughput and reduce the packet loss rate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.8
• /
• pp.688-695
• /
• 2014

In a small wireless environment, such as your home or office, a various network using WiMedia PHY can be mixed. Because these networks operate independently for each application, data conflict can occur between adjacent networks. To avoid data conflict, the resource in a different time zone can be utilized. However, if devices in a network increase, available resources in the network decrease, and then the lack of resources necessary to provide service can occur. To solve this problem, we propose collision avoidacne scheme for coexistence of various UWB systems. In this paper, we evaluate the performance of the proposed scheme through simulation.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.6 s.171
• /
• pp.135-143
• /
• 2005

The shoes process management monitoring system for supporting SCM is developed in this study. This system consists of a monitoring program, a conveyer system, a pneumatic unit, a controller, an USB camera, and a server and a client computer. To operate the developed system easily, the monitoring program using LabVIEW in the Windows environment is developed. This program consists of 5 modules: production management, inventory control, media management, defective management, and communication management. The developed system has several advantages: reduced time for managing process work, decreased labor costs, effective operation, and continuous work without an operator. Nowadays advanced manufacturing companies are trying to find a way to check the performance of their production equipments and plants from remote sites. Thus, to manage the developed system from remote sites, communication network is constructed. In order to evaluate the performance of the monitoring system, experiments were performed. The experimental results showed that the developed system provided a reliable performance and a stable communication.

• Journal of Broadcast Engineering
• /
• v.19 no.5
• /
• pp.616-626
• /
• 2014

In this paper, we introduce a real-time stereo-to-multiview conversion system using FPGA and GPU. The system is based on two different devices so that it consists of two major blocks. The first block is a disparity estimation block that is implemented on FPGA. In this block, each disparity map of stereoscopic video is estimated by DP(dynamic programming)-based stereo matching. And then the estimated disparity maps are refined by post-processing. The refined disparity map is transferred to the GPU device through USB 3.0 and PCI-express interfaces. Stereoscopic video is also transferred to the GPU device. These data are used to render arbitrary number of virtual views in next block. In the second block, disparity-based view interpolation is performed to generate virtual multi-view video. As a final step, all generated views have to be re-arranged into a single image at full resolution for presenting on the target autostereoscopic 3D display. All these steps of the second block are performed in parallel on the GPU device.

• Journal of Broadcast Engineering
• /
• v.22 no.6
• /
• pp.774-784
• /
• 2017

Occupancy sensors installed in buildings and households turn off the light if the space is vacant. Currently PIR (pyroelectric infra-red) motion sensors have been utilized. Recently, the researches using camera sensors have been carried out in order to overcome the demerit of PIR that can not detect static people. If the tradeoff of cost and performance is satisfied, the camera sensors are expected to replace the current PIRs. In this paper, we propose vision sensor-based occupancy detection being composed of tracking, recognition and detection. Our softeware is designed to meet the real-time processing. In experiments, 14.5fps is achieved at 15fps USB input. Also, the detection accuracy reached 82.0%.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.12
• /
• pp.2747-2754
• /
• 2012

This thesis explains the development of multiple LCD system with the additional function to maximize the utilization of PC contents. The newly developed system is composed of host LCD and slave LCD. Host LCD decodes and outputs the image and voice of NTSC, PAL, SECAM signals. It also converts the decoded signals into LVDS signals before transmitting them to slave LCD stage. In addition, the installation of CF Memory and USB Memory helps display multi-media data. Unlike the host LCD, since not including the tuner and memory part, the slave LCD can't receive TV signals and play video signals. It only has the function to receive LVDS image signals and display on a LCD panel. This newly developed multi-LCD system has competitiveness in various aspects. With its simple structure, the failure rate, price and display power are relatively low due to its simplification of the control part. It has price and functional competitiveness as the product whose host LCD can control the entire slave LCD in terms of channel, volume, and video output.

• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.6
• /
• pp.422-426
• /
• 2007

Personal mobile devices equipped with non-volatile storage such as MP3 player, PMP, cellular phone, and USB memory require safety for the stored data on the devices. One of the safety requirements is secure deletion, which is removing stored data completely so that the data can not be restored illegally. In this paper, we study how to design the secure deletion on Flash memory, commonly used as storage media for mobile devices. We consider two possible secure deletion policy, named zero-overwrite and garbage-collection respectively, and analyze how each policy affects the performance of Flash memory file systems. Then, we propose an adaptive file deletion scheme that exploits the merits of the two possible policies. Specifically, the proposed scheme applies the zero-overwrite policy for small files, whereas it employs the garbage-collection policy for large files. Real implementation experiments show that the scheme is not only secure but also efficient.

• The KIPS Transactions:PartC
• /
• v.19C no.4
• /
• pp.215-224
• /
• 2012

Today, individuals and businesses are a lot of paperwork through a computer. So many documents files are creating to digital type. And the digital type files are copied, moved by various media such as USB, E-mail and so on. A careful analysis of these digital materials can be tracked that occurred during the document editing work history. About these research are on the compound document file format, but has not been studied about the new OOXML format that how to analyze linkages between different document files, tracking an internal order, finding unsaved file for identify the process of creating the file. Future, the use of OOXML format digital documents will further increase, these document work history traceability in digital forensic investigation would be a big help. Therefore, this paper on the new OOXML format(has a forensic viewpoint) will show you how to track the internal order and analyze linkages between the files.