• Title/Summary/Keyword: UO2

검색결과 621건 처리시간 0.03초

PVA-Al(III) 착물이 UO$_2$ 소결체의 기공형성과 결정립성장에 미치는 영향(I) (The Effect of PVA-Al(III) Complex on the Pore Formation and Grain Growth of UO$_2$ Sintered Pellet)

  • 이신영;김형수;노재성
    • 한국세라믹학회지
    • /
    • 제35권8호
    • /
    • pp.783-790
    • /
    • 1998
  • The characterization of the complexation reaction of PVA and Al(III) ion at different pH and the sint-ering behaviour of UO2 containing the PVA-Al(III) complexes were investigated. Compared with pure PVA powder the complexed PVA-Al(III) powder had compacter shape and lower decomposition temperature The major phase of PVA-Al(III) complex decomposed at 90$0^{\circ}C$ was $\alpha$-Al2O3 The PVA-Al(III) complex formed at pH 9 had the lowest relative viscosity the highest Al content of 36% and the smallest particle size of 19${\mu}{\textrm}{m}$ While the pure UO2 pellet appeared with bimodal one. The grain size of the pure UO2 pellet was 7${\mu}{\textrm}{m}$ but that of the PVA-Al(III) complex added UO2 pellet was increased up to 36${\mu}{\textrm}{m}$ The largest grain size was ob-tained when the PVA-Al(III) complex formed at pH9 was added and the PVA-Al(III) complex formed at pH 11 had the greatest effect on increasing pore size.

  • PDF

Sol-Gel법을 이용한 구형 UO2 Kernel 제조에 관한 기초연구 (A Basic Study on Spherical UO2 Kernel Preparation Using the Sol-Gel Method)

  • 김연구;정경채;오승철;조문성;나상호;이영우;장종화
    • 한국세라믹학회지
    • /
    • 제42권9호
    • /
    • pp.618-623
    • /
    • 2005
  • HTGR (High Temperature Gas-Cooled Reactor) is highlighted to next generation power plant for producing the clean hydrogen gas. In this study, the spherical $UO_2$ kernel via $UO_3$ gel particles was prepared by the sol-gel process. Raw material of slightly Acid Deficient Uranyl Nitrate (ADUN) solution, which has pH = 1.10 and $[NO_3]/[U]$ mole ratio = 1.93, was obtained from dissolution of $U_3O_8$ powder with conc.-$HNO_3$. The surface of these spherical $UO_3$ gel particles, which was prepared from the broth solution, consisted of 1 M-uranium, 1 M-HMTA, and urea, were covered with the fine crystallite aggregates, and these particles were so hard that crushed well. But the other $UO_3$ gel particles prepared with the broth solution, consisted of 2 M-uranium, 2 M-HMTA, and urea, have soft surface characteristics and an amorphous phase. This type of $UO_3$ gel particles is some chance of doing possibility of high density from the compaction. The amorphous $UO_3$ gel particles was converted to $U_3O_8$ and then $UO_2$ by calcination at $600^{\circ}C\;in\;4\%\;-\;H_2\;+\;N2$ atmosphere.

겔침전과 화학증착법에 의한 구형 UO2 입자와 TRISO 피복입자 제조 (Spherical UO2 Kernel and TRISO Coated Particle Fabrication by GSP Method and CVD Technique)

  • 정경채;김연구;오승철;조문성
    • 한국세라믹학회지
    • /
    • 제47권6호
    • /
    • pp.590-597
    • /
    • 2010
  • HTGR using a TRISO coated particles as nuclear raw fuel material can be used to produce clean hydrogen gas and process heat for a next-generation energy source. For these purposes, a TRISO coated particle was prepared with 3 pyro-carbon (buffer, IPyC, and OPyC) layers and 1 silicone carbide (SiC) layer using a CVD technique on a spherical $UO_2$ kernel surface as a fissile material. In this study, a spherical $UO_2$ particle was prepared using a modified sol-gel method with a vibrating nozzle system, and TRISO coating fabrication was carried out using a fluidized bed reactor with coating gases, such as acetylene, propylene, and methyltrichlorosilane (MTS). As the results of this study, a spherical $UO_2$ kernel with a sphericity of 1+0.06 was obtained, and the main process parameters in the $UO_2$ kernel preparation were the well-formed nature of the spherical ADU liquid droplets and the suitable temperature control in the thermal treatment of intermediate compounds in the ADU, $UO_3$, and $UO_2$ conversions. Also, the important parameters for the TRISO coating procedure were the coating temperature and feed rate of the feeding gas in the PyC layer coating, the coating temperature, and the volume fraction of the reactant and inert gases in the SiC deposition.

음이온 교환크로마토그래피법에 의한 여러가지 산에서 우라늄과 바나듐의 용리현상에 관한연구 (Study on the Elution Behaviors of Uranium and Vanadium in the Various Acids by Anion Exchange Chromatography)

  • 차기원;김종훈
    • 대한화학회지
    • /
    • 제28권5호
    • /
    • pp.309-314
    • /
    • 1984
  • 과염소산, 염산 그리고 황산의 농도 변화에 따른 우라늄과 바나듐 이온의 음이온수지에 대한 용리곡선으로부터 이들 이온의 화학종의 변화와 평형관계를 음이온교환크로마토그래피법으로 연구하였다. 우라늄은 $0.01\;{\sim}\;0.5M$ 과염소산용액에서는 $UO_2^{2+}$의 화학종으로만 존재하며 염산용액에서는 0.5M 까지는 $UO_2^{2+}$ 상태로 존재하나 염산의 농도가 증가함에 따라 여러가지 $Cl^-$의 착물이 형성되는 용리현상을 보였고 황산용액에서는 묽은 황산의 농도에서 우라늄이 상당히 늦게 용리되어 나오는 것으로 보아 $SO_4$=과의 $UO_2(SO_4)_2$= 같은 음이온성 착물이 생성되는 것 같다. 바나듐은 $0.01\;{\sim}\;0.5M$ 과염소산용액에서 바나듐의 용리현상으로부터 $H_2V_{10}O_{28}^{4-}$$VO_2^+$간에 다음과 같은 평형이 존재함을 알았다. $H_2V_{10}O_{28}^{4-} + 14H^+ = 10VO_2^+ + 8H_2O$ 염산 및 황산용액에서도 이런 농도범위에서는 위와같은 평형이 존재하나 $VO_2$+과 $Cl^-$$SO_4^{2-}간의 착이온이 형성되는 것 같다. 위 식의 평형상수값은 $1.9{\times}108$이었다.

  • PDF

$UO_2$ 핵연료 및 혼합핵연료의 노내거동 비교

  • 구양현;이병호;손동성
    • 한국원자력학회:학술대회논문집
    • /
    • 한국원자력학회 1995년도 추계학술발표회논문집(2)
    • /
    • pp.630-635
    • /
    • 1995
  • 장차 우리나라에서 미래형 핵연료의 한 종류로서 사용될 가능성이 있는 경수로용 혼합핵연료가 기존의 $UO_2$ 핵연료와 노내거동에서 어떤 차이를 야기시키는가를 물리적 성질변화 및 반경방향 출력변화의 관점에서 예비적으로 분석하였다. 분석 결과 혼합핵연료는 $UO_2$ 핵연료에 비해 (1) 열전도도가 작아 핵연료 온도가 높았고 (2)증가된 핵연료 온도로 인해 핵분열기체 방출률도 증가하여 핵연료봉 내압의 관점에서는 불리하였으나 (9)증가된 핵연료 내압으로 인해 냉각수 압력과 핵연료봉 내압의 차이가 감소하여 피복관 변형도가 감소하므로써, PCI 판점에서는 $UO_2$ 핵연료에 비해 유리하였다.

  • PDF

시간분해 레이저 유도 형광 분광학을 이용한 우라늄(VI) 가수분해 화학종 규명 연구 (Study on the Chemical Speciation of Hydrolysis Compounds of U(VI) by Using Time-Resolved Laser-Induced Fluorescence Spectroscopy)

  • 정의창;조혜륜;박경균
    • 방사성폐기물학회지
    • /
    • 제7권3호
    • /
    • pp.133-141
    • /
    • 2009
  • 시간분해 레이저 유도 형광 분광학을 이용하여 ${UO_2}^{2+}$, $UO_2(OH)^+$, ${(UO_2)}_2{(OH)_2}^{2+}$, ${(UO_2)}_3{(OH)_5}^+$와 같은 우라늄(VI) 화학종 규명 연구를 수행하였다. 들뜸 파장의 변화에 따른 화학종 규명 감도를 조사하였다. 266nm의 들뜸 파장을 이용할 경우, 나노 몰 농도의 U(VI) 화합물을 구분할 수 있는 화학종 규명 감도를 얻었다. 이온 세기가 0.1 M, pH가 1인 조건에서 ${UO_2}^{2+}$ 이온의 형광 스펙트럼과 형광 수명을 측정하였다. 488, 509, 533, 559nm파장의 특징적인 형광 봉우리를 관측하였고, 측정한 형광 수명은 $1.92{\pm}0.17{\mu}s$ 이었다. U(VI) 가수분해 화합물의 형광 스펙트럼과 형광 수명의 변화를 이 값을 기준으로 비교하였다. 장파장 방향으로 이동한 형광 봉우리와 길어진 형광 수명을 가진 가수분해 화합물의 특징적인 양상을 보고한다.

  • PDF

Effect of $TiO_2$ on Sintering Behavior of Mixed $UO_2$ and $U_3O_8$ Powder Compacts

  • Song, Kun-Woo;Kim, Keon-Sik;Kang, Ki-Won;Kim, Young-Min;Yang, Jae-Ho;Jung, Youn-Ho
    • Nuclear Engineering and Technology
    • /
    • 제31권5호
    • /
    • pp.455-464
    • /
    • 1999
  • The effect of TiO$_2$ on the sintering behavior of mixed UO$_2$-U$_3$O$_{8}$ Powder compacts has been investigated using the U$_{3}$O$_{8}$ powder made tv oxidation of defective UO$_{2}$ pellets. Without TiO$_2$, UO$_2$ pellet density is inversely proportional to U$_3$O$_{8}$ content and is below 94 %TD in the U$_3$O$_{8}$ range above 15 wt%. Using more than 0.1 wt % TiO$_2$, however, the density decreases slightly with U$_3$O$_{8}$ content and thus is higher than about 94% TD in the whole range of U$_3$O$_{8}$ content. The grain sizes of UO$_2$ pellets with more than 0.1 wt % TiO$_2$are larger than about 30${\mu}{\textrm}{m}$. Therefore, the U$_3$O$_{8}$ Powder can be reused without any restriction on its amount in UO$_2$ pellet fabrication by sintering the mixed UO$_2$-U$_3$O$_{8}$ compact with the aid of TiO$_2$. Mechanisms for densification and grain growth are proposed and discussed, based on a dilatometry study and an examination of microstructure. microstructure.

  • PDF

$UO_2$ 소결체의 특성 및 미세구조에 미치는 첨가제의 영향 (Effects of Additives on the Characteristics and Microstructure of $UO_2$ Pellet)

  • 유호식;이신영;이승재;강권호;김형수
    • 한국세라믹학회지
    • /
    • 제37권7호
    • /
    • pp.660-664
    • /
    • 2000
  • Effect of various kinds of additive such as AlOOH, Al(OH)3, Al2Si2O5(OH)4, Nb2O5, TiO2 and MgO on the properties and microstructures of UO2 pellet has been examined. All the tested dopants had played a role to reduce sintered density and open porosity. It was revealed that the addition of TiO2 made pellet more stable thermally. UO2 pellet doped with 0.2wt% TiO2 was swelled rather than densified after annealing for 24 hrs at 1$700^{\circ}C$. It was attributed to large pore with spherical shape. Titinia and silicon coexisted with Al element were more effective to increase grain size than other additives. It could be also revealed that the formation of liquid phase was the main cause of grain growth.

  • PDF

UO22+ Ion-Selective Membrane Electrode Based on a Naphthol-Derivative Schiff's Base 2,2'-[1,2-Ethandiyl bis(nitriloethylidene)]bis(1-naphthalene)

  • Shamsipur, Mojtaba;Saeidi, Mahboubeh;Yari, Abdullah;Yaganeh-Faal, Ali;Mashhadizadeh, Mohammad Hossein;Azimi, Gholamhasan;Naeimi, Hossein;Sharghi, Hashem
    • Bulletin of the Korean Chemical Society
    • /
    • 제25권5호
    • /
    • pp.629-633
    • /
    • 2004
  • A new PVC membrane electrode for $UO_2^{2+}$ ion based on 2,2'-[1,2-ethanediyl bis (nitriloethylidene)]bis(1-naphthalene) as a suitable ionophore was prepared. The electrode exhibites a Nernstian response for $UO_2^{2+}$ ion over a wide concentration range ($1.0{\times}10^{-1}-1.0{\times}10^{-7}$M) with a slope of 28.5 ${\pm}$ 0.8 mV/decade. The limit of detection is $7.0{\times}10^{-8}$M. The electrode has a response time of < 20 s and a useful working pH range of 3-4. The proposed membrane sensor shows good discriminating abilities towards $UO_2^{2+}$ ion with regard to several alkali, alkaline earth transition and heavy metal ions. It was successfully used to the recovery of uranyl ion from, tap water and, as an indicator electrode, in potentiometric titration of $UO_2^{2+}$ ion with Piroxycam.