• Journal of Photoscience
• /
• v.5 no.2
• /
• pp.69-71
• /
• 1998

Electronic structures and excited states for pyrazinylquinoxalinylethylene are investigated using PM3-UHF-CI and Molecular Mechanics force field. The results indicate that pyrazinylquinoxalinylethylene has extensively mixed ($\pi$, $\pi$$^*$) and (n, $\pi$$^*$) states while the (n, $\pi$$^*$) transition band does not appear in the absorption spectrum clearly and seems to be submerged under the more intense ($\pi$, $\pi$$^*$) bands.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.4
• /
• pp.382-389
• /
• 1997

We present the results on the applicability of the polycrystalline AIN thin films for a surface acoustic wave filter operating at 800 MHz frequency. The films show the FWHM of 3 .deg. from th X-ray rocking curve, which indicates that the c-axis of the films is pre- ferentially oriented along the growth direction. The fabricated band pass filters exhibit the center frequency of 865 MHz with 3dB band-width of 45 MHz. From the measured frequency response, the electro-mechanical coupling constant of 0.8% and the SAW velocity of 5,709 m/s are obtained. Thus, we conclude that the sputtered AIN films are feasible for the fabrication of uper UHF band SAW filters.

• The Journal of the Korea Contents Association
• /
• v.7 no.4
• /
• pp.30-38
• /
• 2007

In this paper, UHF band RFID reader antenna using filbert curve fractal structure and adding the partially grounded plane at the bottom of antenna, which has a resonant frequency at 910MHz, is proposed. Input impedance of antenna is matched with the feed line of 50ohm by varying the length and width of line segment making up the antenna, and by moving the position of via hole. The gain and directivity of antenna is enhanced as varying the dimension of the partially grounded plane and adding the line segment. The size of fabricated antenna is $68mm\times68mm$. The impedance band width(VSWR<2) is $882\sim942MHz$. The return loss and the gain of fabricated antenna are -18.2dB, 5.3dBi at 910MHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11B
• /
• pp.1357-1362
• /
• 2011

TV White Spaces (TVWS) are freed up after transition from analog television to Digital Television (DTV). Some wireless communications are allowable to operate in TVWSs, such unlicensed Wireless Fidelity (WiFi). Because TVWSs are located in the VHF and UHF bands, TVWSs can provide significantly better coverage and wall penetration inside buildings and other structures than the 2.4 GHz and 5 GHz WiFi frequencies currently in use. Therefore, this paper assumes that WiFi will be deployed in TVWSs. However, the interference impact of WiFi on DTV has to be taken into account. The interference probability in DTV receiver was evaluated by using Spectrum Engineering Advanced Monte-Carlo Analysis Tool (SEAMCAT). As a result, when 20 WiFi UEs are simultaneously operating at the maximum transmit power of 23 dBm and the guard band is 22 MHz, the protection distance should be at least 6 km to meet the interference probability of 5% in DTV receiver.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.12 s.115
• /
• pp.1212-1223
• /
• 2006

Microwave(M/W) bands, though having great demand in wireless services, have been used mostly for long distance communications. As a result, the studies on their mobile radio models have been made less than on VHF/UHF. However, as the mobile communication services with M/W bands have been increasing, the development of a more accurate prediction model of the mobile radio environments has been demanded. The development of a reliable radio prediction model in the mobile radio environments requires the measurement and analysis of the characteristics of the radio waves according to reflection, diffraction and scattering of radio signals in various mobile radio environments. The proposed 8 GHz band radio prediction models have 2 different categories: (1) LOS model and (2) non-LOS model. The LOS model predicts signal strength using the analytic result with measured pathless exponents for the waves direct and reflected by ground and buildings, and the non-LOS model suggests a prediction model of received power by calculating the signal variations after diffraction.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5A
• /
• pp.496-503
• /
• 2010

The implementation of a RF transceiver for WRAN(Wireless Regional Area Network) system based on IEEE 802.22 standard using Cognitive Radio technology is presented in this paper. A CMOS RF transceiver IC for WRAN system operates in VHF/UHF(54~862MHz) broadband, and employs dual-path direct-conversion configuration and the in-band harmonic distortions are effectively suppressed by exploiting the dual-path direct conversion architecture. For 64QAM(3/4 coding rate) OFDM signal, an EVM of <-31.4dB(2.7%) has been achieved at 10dBm off-chip PA output power and the total chip area with pads is 12.95 mm2. The experimental results show that the proposed CMOS RF transceiver IC has perfect performance for WRAN system based on TDD(Time Division Duplex) mode.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1616-1626
• /
• 2010

This paper will show how self-alarming EAS(Electronic Article Surveillance) system can improve its receiving performance of magnetic field signal and reduce false alarm using dual-band wireless communication. Our research improved the receiving performance and the areas of recognition of magnetic signal through the change of VLF receiving circuit and alarm transmitting method. In addition, we verified the reduction of false alarm by improvement of integrity and distance between tag and receiver through experiment. Thanks to our research, we can build the high performance and economical EAS with low false alarm on the multi gate store.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.3
• /
• pp.292-300
• /
• 2010

In this paper, we propose a RF front-end architecture based on hybrid conversion which is available to receive both broadband and multiband DVB-H receiver, and a multi-function circuit for implementing the RF front-end is fabricated. A multi-function circuit is operated as a sub-harmonic mixer mode in the case of receiving a broadband VHF/UHF band, which show a conversion loss of -10.0 dB, noise figure of 7.0 dB and IIP3 of 2.0 dBm. On the other hand, it is performed as a attenuation mode with a insertion loss of -10.0 dB in receiving a multiband, L-band.

• Journal of Advanced Navigation Technology
• /
• v.8 no.2
• /
• pp.184-190
• /
• 2004

A feedforward linear power amplifier (FLPA) has been developed for UHF-band RFID reader applications. The main and error amplifiers are composed of a 2 stage so that linearity of the FLPA can be improved. The FLPA has been implemented on an FR-4 substrate (Er=4.7 and thickness=0.8 mm) with 3-dB and 10-dB hybrid couplers for input/output power divider and combiner. For 2-tone measurement (input level=-11 dBm at $f_1$=915 MHz and $f_2$=916 MHz), the FLPA exhibits a -18.52 dBm of $IMD_3$, which indicates that $IMD_3$ cancellation with feedforward loop is more than 27 dB. From 890 to 960 MHz, 1-dB gain compression output power and power gain of the FLPA are higher than 30 dBm and 40 dB, respectively.

• Journal of Advanced Navigation Technology
• /
• v.19 no.2
• /
• pp.168-174
• /
• 2015

Wireless communication system for firefighters has an important role as the last communication method between the commander and the firefighters in disaster sites like fire. But the operation of Gyeongnam wireless communication system is installed, and maintained and controlled without criteria for the selection of a transmitting station and the analysis of propagation environment because of the lack of budget and the absence of professional personnel. To improve the performance of the radio station, this paper theoretically calculated free space loss of UHF 400 MHz band used by all firefighters in Gyeongnam and diffractions caused by single and multiple obstacles and computed the error after comparing the results of the actual measurement to those of simulation with FRAS operated by KFL. In the results, Deygout model was the most consistent with the actual measurement for 400MHz band in Kimhae site.