• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.12
• /
• pp.1205-1211
• /
• 2008

This paper describes methods to estimate 3-D position of target with respect to reference frame through monocular image from unmanned aerial vehicle (UAV). 3-D position of target is used as information for surveillance, recognition and attack. In this paper. 3-D position of target is estimated to make guidance and control law, which can follow target, user interested. It is necessary that position of target is measured in image to solve 3-D position of target. In this paper, kalman filter is used to track and output position of target in image. Estimation of target's 3-D position is possible using result of image tracking and information of UAV and camera. To estimate this, two algorithms are used. One is methode from arithmetic derivation of dynamics between UAV, carmer, and target. The other is LPV (Linear Parametric Varying). These methods have been run on simulation, and compared in this paper.

• Journal of Advanced Navigation Technology
• /
• v.10 no.4
• /
• pp.400-405
• /
• 2006

In this paper, we propose a moving object tracking algorithm by using motion estimation in UAV(Unmanned Aerial Vehicle) video. Proposed algorithm is based on generation of initial image from detected reference image, and tracking of moving object under the time-varying image. With a series of this procedure, tracking process is stable even when the UAV camera sways by correcting position of moving object, and tracking time is relatively reduced. A block matching algorithm is also utilized to determine the similarity between reference image and moving object. An experimental result shows that our proposed algorithm is better than the existing full search algorithm.

• Journal of the Mineralogical Society of Korea
• /
• v.30 no.1
• /
• pp.1-9
• /
• 2017

This study investigated the effectiveness of Unmanned Aerial Vehicle (UAV) and 3D modeling on mine reclamation monitoring. The high spatial resolution of 3.8 cm ortho-mosaic image and Digital Elevation Model (DEM) are constructed based on UAV air survey. The ortho-mosaic image effectively shows mine reclamation activities and recognize objects and topological changes in the image. The comparative analysis of 3D models between UAV based DEM and report based DEM reveals that total amount of $268,672m^3$ additional dumping of contaminated soil is equivalent to 710,000 ton. It concludes that a UAV based survey enables high accuracy spatial information extraction for mine reclamation activities with high efficiency. It is expected that UAV survey will be very effectively used for preliminary data acquisition and project monitoring for mine reclamation activities.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.3
• /
• pp.217-226
• /
• 2022

In the view of the application of high-precision spatial information production, UAV (Umanned Aerial Vehicle)-Photogrammetry has a problem in that it lacks specific procedures and detailed regulations for quantitative quality verification methods or certification of captured images. In addition, test tools for UAV image quality assessment use only the GSD (Ground Sample Distance), not MTF (Modulation Transfer Function), which reflects image resolution and contrast at the same time. This fact makes often the quality of UAV image inferior to that of manned aerial image. We performed MTF and GSD analysis simultaneously using a siemens star to confirm the necessity of MTF analysis in UAV image quality assessment. The analyzing results of UAV images taken with different payload and sensors show that there is a big difference in σ_MTF values, representing image resolution and the degree of contrast, but slightly different in GSD. It concluded that the MTF analysis is a more objective and reliable analysis method than just the GSD analysis method, and high-quality drone images can only be obtained when the operator make images after judging the proper selection the sensor performance, image overlaps, and payload type. However, the results of this study are derived from analyzing only images acquired by limited sensors and imaging conditions. It is therefore expected that more objective and reliable results will be obtained if continuous research is conducted by accumulating various experimental data in related fields in the future.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.6
• /
• pp.743-750
• /
• 2016

Recently, usage of UAV (Unmanned Aerial Vehicle) has increased in agricultural part. This study was conducted to classify onion and garlic using supervised classification of a fixed-wing UAV (Model : Ebee) images for evaluation of possibility about estimation of onion and garlic cultivation area using UAV images. Aerial images were obtained 11~12 times from study sites in Changryeng-gun and Hapcheon-gun during farming season from 2015 to 2016. The result for accuracy in onion and garlic image classification by R-G-B and R-G-NIR images showed highest Kappa coefficients for the maximum likelihood method. The result for accuracy in onion and garlic classification showed high Kappa coefficients of 0.75~0.97 from DOY 105 to DOY 141, implying that UAV images could be used to estimate onion and garlic cultivation area.

• Korean Journal of Remote Sensing
• /
• v.32 no.3
• /
• pp.275-285
• /
• 2016

This study analyzes the accuracy of ortho imagery based on whether camera calibration performed or not, using an unmanned aerial vehicle which equipped smart camera. Photgrammetric UAV system application was developed and smart camera performed image triangulation, and then created image as ortho imagery. Image triangulation was performed depending on whether interior orientation (IO) parameters were considered or not, which determined at the camera calibration phase. As a result of the camera calibration, RMS error appeared 0.57 pixel, which is more accurate compared to the result of the previous study using non-metric camera. When IO parameters were considered in static experiment, the triangulation resulted in 2 pixel or less (RMSE), which is at least 200 % higher than when IO parameters were not considered. After generate ortho imagery, the accuracy is 89% higher when camera calibration are considered than when they are not considered. Therefore, smart camera has high potential to use as a payload for UAV system and is expected to be equipped on the current UAV system to function directly or indirectly.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.6
• /
• pp.10-18
• /
• 2010

This paper proposes an image stabilization algorithm for close watching UAV(Unmanned Aerial Vehicle) using motion separation and stabilization mode. The motion of UAV is composed of its actual navigating motion and unwanted vibrating motion so that image sequences obtained from UAV are shaken randomly. In order to stabilize these images we separate the vibrating motion component from UAV motion and remove the effect caused by it from image sequences. In the proposed algorithm the motion and global intensity change of two consecutive images are modeled with 6 motion parameters and 2 intensity change parameters respectively. These modeled parameters are estimated by non-linear least square method based on Gauss-Newton algorithm. The vibrating motion component is separated from the estimated motion using IIR filtering and the geometric deformation caused by it is removed from image sequences. In order to apply the proposed method to real aerial image sequences with many abrupt changes of camera view, we proposed a stabilizing method using two different modes named as stabilizing and non-stabilizing mode. Experimental results show that the accuracy of motion estimation is 99% and the efficiency of removing the vibrating motion component is 90%. We apply the proposed method to real aerial image sequences and verified its stabilizing performance.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_1
• /
• pp.941-951
• /
• 2018

Utilization and demand of UAV (unmanned aerial vehicle) for the generation of 3D city model are increasing. In this study, we performed an experiment to adjustment position/orientation of UAV with incomplete attitude information and to extract point cloud data. In order to correct the attitude of the UAV, the rotation angle was calculated by using the continuous position information of UAV movements. Based on this, the corrected position/orientation information was obtained by applying IBA (Incremental Bundle Adjustment) based on photogrammetry. Each pair was transformed into an epipolar image, and the MDR (Multi-Dimensional Relaxation) technique was applied to obtain high precision DSM. Each extracted pair is aggregated and output in the form of a single point cloud or DSM. Using the DJI inspire1 and Phantom4 images, we can confirm that the point cloud can be extracted which expresses the railing of the building clearly. In the future, research will be conducted on improving the matching performance and establishing sensor models of oblique images. After that, we will continue the image processing technology for the generation of the 3D city model through the study of the extraction of 3D cloud It should be developed.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.1
• /
• pp.81-87
• /
• 2016

It is important to analyze the exact damage information for fast recovery when natural disasters cause damage on river-side facilities such as dams, bridges, embankments etc. In this study, we shows the method to effectively damage analysis plan using UAV(Unmanned aerial vehicle) images and accuracy assessment of it. The UAV images are captured on area near the river-side facilities and the core methodology for damage analysis are image matching and change detection algorithm. The result(point cloud) from image matching is to construct 3-dimensional data using by 2-dimensional images, it extracts damage areas by comparing the height values on same area with reference data. The results are tested absolute locational precision compared by post-processed aerial LiDAR data named reference data. The assessment analysis test shows our matching results 10-20 centimeter level precision if external orientation parameters are very accurate. This study shows suggested method is very useful for damage analysis in a large size structure like river-side facilities. But the complexity building can't apply this method, it need to the other method for damage analysis.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.4
• /
• pp.86-101
• /
• 2019

Remote sensing technology has been continuously developed both quantitatively and qualitatively, including platform development, exploration area, and exploration functions. Recently, the use cases and related researches in the agricultural field are increasing. Also, since it is possible to detect and quantify the condition of cropland and establish management plans and policy support for cropland and agricultural environment, it is being studied in various fields such as crop growth abnormality determination and crop estimation based on time series information. The purpose of this study was to analyze the vegetation index for agricultural land reclamation area using a UAV equipped with a multi-spectral sensor. In addition, field surveys were conducted to evaluate the accuracy of vegetation indices calculated from multispectral image data obtained using UAV. The most appropriate vegetation index was derived by evaluating the correlation between vegetation index calculated by field survey and vegetation index calculated from UAV multispectral image, and was used to analyze vegetation index of the entire area.