• 한국산업융합학회 논문집
• /
• 제24권3호
• /
• pp.343-350
• /
• 2021

Unmanned aerial vehicles(UAV) photogrammetry provides a cost-effective option for collecting high-resolution 3D point clouds compared with UAV LiDAR and aerial photogrammetry. The main objectives of this study were to (1) validate the accuracy of 3D site model generated, and (2) determine the differences between Digital Elevation Model(DEM) and Digital Surface Model(DSM). In this study, DEM and DSM were shown to have varying degree of accuracy from observed data. The results indicated that the model predictions were considered tend to over- and under-estimated. The range of RMSE of DSM predicted was from 8.2 and 21.3 when compared with the observation. In addition, RMSE values were ranged from 10.2 and 25.8 to compare between DEM predicted and field data. The predict values resulting from the DSM were in agreement with the observed data compared to DEM calculation. In other words, it was determined that the DSM was a better suitable model than DEM. There is potential for enabling automated topography evaluation of the prior-harvest areas by using UAV technology.

• 대한원격탐사학회지
• /
• 제37권4호
• /
• pp.733-745
• /
• 2021

Although waxy corn varieties developed after the 1980s show differences depending on development stages and conditions, studies on the characteristics of waxy corn during the growth stage are rare. The subject of this study was a field survey and unmanned aerial vehicle (UAV) image acquisition of four waxy corn varieties cultivated in Idam-ri, Gammul-myeon, Goesan-gun, Korea. The study was conducted in four stages at intervals of two weeks after planting in 2019. The growth characteristics of each of the four varieties were analyzed using growth curves obtained based on field survey and UAV imagery data. The characteristics of each growth stage of the four varieties of corn, as assessed using normalized difference vegetation index (NDVI) and plant height (P.H.) values, were as follows. The growth model was identified as a model in which three-parameter logistic (3PL) curves reflect the growth characteristics of corn well. In particular, it was found that the variations in growth rate shown by P.H. and NDVI values clearly explain the differences between corn varieties. Among the four cultivars, growth and development first occurred at the early vegetative stage in Daehakchal, followed by Mibaek 2, Miheukchal, and finally Hwanggeummatchal. The variationsin P.H. and NDVI were achieved quickly and earlier in Daehakchal, followed by Mibaek 2, Hwanggeummatchal, and Miheukchal. It was confirmed that these results reflected the characteristics of the fast white-type varieties, while the black-type varieties were delayed, as in a previous study. These results reflect the resistance to lodging that affects the cultivation environment and the response characteristics to nutrients and moisture. It was confirmed that UAV accurately provides growth information that is very useful for analyzing the growth characteristics of each corn variety.

• 한국환경복원기술학회지
• /
• 제25권5호
• /
• pp.29-41
• /
• 2022

Alien species cause problems in various ecosystems, reduce biodiversity, and destroy ecosystems. Due to these problems, the problem of a management plan is increasing, and it is difficult to accurately identify each individual and calculate the number of individuals, especially when researching alien turtle species such as GPS and PIT based on capture. this study intends to conduct an individual recognition study using a UAV. Recently, UAVs can take various sensor-based photos and easily obtain high-definition image data at low altitudes. Therefore, based on previous studies, this study investigated five variables to be considered in UAV flights and produced a test paper using them. OCR was used to monitor the displayed turtles using the manufactured test paper, and this confirmed the recognition rate. As a result, the use of yellow numbers showed the highest recognition rate. In addition, the minimum threat distance was confirmed to be 3 to 6m, and turtles with a shell size of 6 to 8cm were also identified during the flight. Therefore, we tried to propose an object recognition methodology for turtle display text using OCR, and it is expected to be used as a new turtle monitoring technique.

• 인간식물환경학회지
• /
• 제24권4호
• /
• pp.441-450
• /
• 2021

Background and objective: The purpose of study is to analyze the three-dimensional (3D) structure by creating a 3D model for green spaces in a park using unmanned aerial vehicle (UAV) images. Methods: After producing a digital surface model (DSM) and a digital terrain model (DTM) using UAV images taken in Mureung Park in Chuncheon-si, we generated a digital tree height model (DHM). In addition, we used the mean shift algorithm to test the classification accuracy, and obtain accurate tree height and volume measures through field survey. Results: Most of the tree species planted in Mureung Park were Pinus koraiensis, followed by Pinus densiflora, and Zelkova serrata, and most of the shrubs planted were Rhododendron yedoense, followed by Buxus microphylla, and Spiraea prunifolia. The average height of trees measured at the site was 7.8 m, and the average height estimated by the model was 7.5 m, showing a difference of about 0.3 m. As a result of the t-test, there was no significant difference between height values of the field survey data and the model. The estimated green coverage and volume of the study site using the UAV were 5,019 m² and 14,897 m³, respectively, and the green coverage and volume measured through the field survey were 6,339 m² and 17,167 m³. It was analyzed that the green coverage showed a difference of about 21% and the volume showed a difference of about 13%. Conclusion: The UAV equipped with RTK (Real-Time Kinematic) and GNSS (Global Navigation Satellite System) modules used in this study could collect information on tree height, green coverage, and volume with relatively high accuracy within a short period of time. This could serve as an alternative to overcome the limitations of time and cost in previous field surveys using remote sensing techniques.

• 한국안전학회지
• /
• 제37권6호
• /
• pp.89-95
• /
• 2022

A method for measuring the length and slope of a temporary structure using an unmanned aerial vehicle (UAV) and 3D modeling method is proposed. The actual length and slope of the vertical member of the specimen were measured and compared with the measured values obtained by the proposed method for the specimens with and without the vertical protection net installed. Based on the result of measuring the length of the temporary structure specimen using the UAV and 3D modeling method, the measured value showed an error of 0.87% when compared to the actual length in the specimen without the vertical protection net installed. In addition, the error of the slope was 0.63°. It was thought that the proposed method could be usable for the purpose of finding parts in wrong installation state on the temporary structure and informing the manager in charge. However, in the case of the specimen with the vertical protection net, the measurement showed a 1.46% error in length and 2.77° difference in slope. Therefore, if a vertical protection net is to be installed in a temporary structure, the measurement accuracy should be improved by utilizing an image processing method, etc.

• 대한원격탐사학회지
• /
• 제40권1호
• /
• pp.93-101
• /
• 2024

Accurate field crop classification is essential for various agricultural applications, yet existing methods face challenges due to diverse crop types and complex field conditions. This study aimed to address these issues by combining support vector machine (SVM) models with multi-seasonal unmanned aerial vehicle (UAV) images, texture information extracted from Gray Level Co-occurrence Matrix (GLCM), and RGB spectral data. Twelve high-resolution UAV image captures spanned March-October 2021, while field surveys on three dates provided ground truth data. We focused on data from August (-A), September (-S), and October (-O) images and trained four support vector classifier (SVC) models (SVC-A, SVC-S, SVC-O, SVC-AS) using visual bands and eight GLCM features. Farm maps provided by the Ministry of Agriculture, Food and Rural Affairs proved efficient for open-field crop identification and served as a reference for accuracy comparison. Our analysis showcased the significant impact of hyperparameter tuning (C and gamma) on SVM model performance, requiring careful optimization for each scenario. Importantly, we identified models exhibiting distinct high-accuracy zones, with SVC-O trained on October data achieving the highest overall and individual crop classification accuracy. This success likely stems from its ability to capture distinct texture information from mature crops.Incorporating GLCM features proved highly effective for all models,significantly boosting classification accuracy.Among these features, homogeneity, entropy, and correlation consistently demonstrated the most impactful contribution. However, balancing accuracy with computational efficiency and feature selection remains crucial for practical application. Performance analysis revealed that SVC-O achieved exceptional results in overall and individual crop classification, while soybeans and rice were consistently classified well by all models. Challenges were encountered with cabbage due to its early growth stage and low field cover density. The study demonstrates the potential of utilizing farm maps and GLCM features in conjunction with SVM models for accurate field crop classification. Careful parameter tuning and model selection based on specific scenarios are key for optimizing performance in real-world applications.

• 한국측량학회지
• /
• 제38권1호
• /
• pp.43-48
• /
• 2020

석회석 채광을 위한 노천광산에는 산림훼손과 지형의 급격한 변화로 급경사의 절개면이 발생하기 때문에 안전사고 예방을 위한 기술개발과 많은 노력이 필요하다. 환경파괴를 줄이고, 노천광산의 안전한 개발을 위해서는 정확한 3차원 지형정보를 제작하여야 한다. 이에 본 연구에서는 무인항공기를 이용하여 사진촬영 및 3D 레이저 스캔을 수행하고, 노천광산에 대한 지형정보를 구축하였다. 무인항공기로 취득된 데이터의 처리를 통해 DSM (Digital Surface Model), DEM (Digital Elevation Model) 및 정사영상을 제작하였으며, 결과물을 GNSS (Global Navigation Satellite System) 측량성과와 비교하여 정확도를 평가함으로써 활용성을 제시하고자 하였다. 연구 결과 사진 및 3D 레이저 스캐닝 결과물의 정확도는 각각 11cm, 8cm 정도를 나타내었으며, 정확도 평가 결과와 데이터의 특징 분석을 통해 무인항공기를 이용한 노천광산의 지형정보 구축에 대한 활용성을 제시할 수 있었다. 향후 광물자원 개발 분야에 무인항공기를 이용한 정확한 3차원 지형정보의 구축 및 활용은 효과적인 광산관리 및 안전사고 예방에 크게 기여할 것이다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2010년 춘계학술발표회 논문집
• /
• pp.77-80
• /
• 2010

The demand for human security significantly promotes the development of surveillance applications using a multi-sensor integrated UAV system. For more sophisticated operations, the system should provide a sequence of images rectified in a ground coordinate system in realtime. This rectification requires accurate position and attitude of the camera at the time of exposure of each image, which can be estimated through an Aerial Triangulation process using the GPS/INS data and tie points between adjacent images. In this work, the KLT tracker is utilized to obtain the tie points. To satisfy the realtime requirements, we present an approach to speed up the tracker by supplying the initial guessed positions of tie points based on the exterior orientation. The experimental results show that, when the guessed positions are supplied, the KLT tracker consumed less computational time than the ordinary KLT which is more suitable to be incorporated into the realtime image georeferencing process.

• International Journal of Internet, Broadcasting and Communication
• /
• 제10권2호
• /
• pp.13-18
• /
• 2018

Drones are controlled by the remote pilot from the ground stations using the radio control or autonomously following the pre-programmed flight plans. In this paper, we develop a method and an optimal path search system for providing 3D augmented reality flight (ARF) images for safe and efficient flight control of drones. The developed system consisted of the drone, the ground station and user terminals, and the optimal path search server. We use the Dijkstra algorithm to find the optimal path considering the drone information, flight information, environmental information, and flight mission. We generate a 3D augmented reality flight (ARF) image overlaid with the path information as well as the drone information and the flight information on the flight image received from the drone. The ARF image for adjusting the drone is generated by overlaying route information, drone information, flight information, and the like on the image captured by the drone.

• 한국초지조사료학회지
• /
• 제36권4호
• /
• pp.365-369
• /
• 2016

본 연구는 산지초지에서 애기수영의 분포를 신속하고 정밀하게 파악하기 위안 무인기 촬영 항공영상의 이용가능성을 실험하였다. 항공영상은 일반 디지털카메라로 촬영한 RGB 영상과 자체 제작한 NIR 카메라로 촬영한 NIR 영상을 이용하여 각각 Red, Green, Blue 벤드와 NIR 밴드를 이용하였고, 밴드조합에 따른 애기수영의 건물비율과의 상관관계를 조사하였다. 다중선형회귀분석 결과 NIR+R+G+B 밴드의 조합이 가장 높은 상관관계($R^2$, 0.96)를 보였으며, R+G+B 밴드의 조합이 다음으로 높은 상관관계를 보였고 ($R^2$, 0.91) NIR+R 밴드($R^2$, 0.45)와 NIR+G 밴드 ($R^2$, 0.27)는 상대적으로 낮은 상관관계를 보여 NIR+R+G+B 밴드조합이 애기수영 분포 파악을 위하여 가장 적합한 것을 확인하였다. R+G+B 밴드 조합의 경우 NIR+R+G+B 밴드의 조합과 비교하여 예측정확도가 큰 차이가 나지 않았으며 근적외선 카메라 없이 일반 디지털 카메라로 영상정보의 획득이 가능하기 때문에 현장적용성 면에서 장점을 가질 것으로 판단된다.