• Korean Journal of Weed Science
• /
• v.15 no.4
• /
• pp.262-269
• /
• 1995

The reseach was conducted to find out if there are any difference in growth, specific pattern in weed competition, and herbicide response of Korean lawngrass(Zoysia japonica Steud.) in a green house equipped with auto-foggy system. Plant height and leaf stage of Korean lowngrass under foggy condition were increased through all growing stages, whereas the number of tillers and shoot fresh weight harvested at 100 days after seeding were reduced by 24% and 29%, respectively, comparing with non-foggy condition. Weed emergence(total fresh weight) under foggy condition was much greater than that under non-foggy condition. Plant height, number of tillers, number of plant and shoot fresh weight of lawngrass under foggy condition were severely reduced with increasing the duration of competition(above 40 day-competition). Among the herbicides treated, oxyfluorfen completely inhibited plant height of lawngrass regardless of foggy condition, and bensulide considerably inhibited plant height of lawngrass under foggy condition. On the other hand, flazasulfuron did not affect the growth of lawngrass under both foggy and non-foggy conditions. At 40 days after herbicides application, weeding efficacy of bensulide and mecoprop under foggy condition were reduced by 6% and 13%, respectively, comparing with non-foggy condition.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.559-563
• /
• 2015

Monitor of All-sky X-ray Image (MAXI) is a Japanese X-ray all-sky surveyer mounted on the International Space Station (ISS). It has been scanning the whole sky since 2009 during every 92-minute ISS rotation. X-ray transients are quickly found by the real-time nova-search program. As a result, MAXI has issued 133 Astronomer's Telegrams and 44 Gamma-ray burst Coordinated Networks so far. MAXI has discovered six new black holes (BH) in 4.5 years. Long-term behaviors of the MAXI BHs can be classified into two types by their outbursts; a fast-rise exponential-decay type and a fast-rise flat-top one. The slit camera is suitable for accumulating data over a long time. MAXI issued a 37-month catalog containing 500 sources above a ~0.6 mCrab detection limit at 4-10 keV in the region ${\mid}{b}{\mid}$ > $10^{\circ}$. The SSC instrument utilizing an X-ray CCD has detected diffuse soft X-rays extending over a large solid angle, such as the Cygnus super bubble. MAXI/SSC has also detcted a Ne emission line from the rapid soft X-ray nova MAXI J0158-744. The overall shapes of outbursts in Be X-ray binaries (BeXRB) are precisely observed with MAXI/GSC. BeXRB have two kinds of outbursts, a normal outburst and a giant one. The peak dates of the subsequent giant outbursts of A0535+26 repeated with a different period than the orbital one. The Be stellar disk is considered to either have a precession motion or a distorted shape. The long-term behaviors of low-mass X-ray binaries (LMXB) containing weakly magnetized neutron stars are investigated. Transient LMXBs (Aql X-1 and 4U 1608-52) repeated outbursts every 200-1000 days, which is understood by the limit-cycle of hydrogen ionization states in the outer accretion disk. A third state (very dim state) in Aql X-1 and 4U 1608-52 was interpreted as the propeller effect in the unified picture of LMXB. Cir X-1 is a peculiar source in the sense that its long-term behavior is not like typical LMXBs. The luminosity sometimes decreases suddenly at periastron. It might be explained by the stripping of the outer accretion disk by a clumpy stellar wind. MAXI observed 64 large flares from 22 active stars (RS CVns, dMe stars, Argol types, young stellar objects) over 4 years. The total energies are $10^{34}-10^{36}$ erg $s^{-1}$. Since MAXI can measure the spectrum (temperature and emission measure), we can estimate the size of the plasma and the magnetic fields. The size sometimes exceeds the size of the star. The magnetic field is in the range of 10-100 gauss, which is a typical value for solar flares.

• Korean Journal of Weed Science
• /
• v.16 no.3
• /
• pp.230-236
• /
• 1996

Pot experiment in greenhouse was conducted to determine the effect of growth and anatomical characteristics of bensulfuron on the seedlings of rice and barnyardgrass. Formulated bensulfuron was soil applied at 102g ai/ha to rice and barnyardgrass grown under various cropping patterns at 5 days after seeding or transplanting. At 10 days after application, plants were harvested to examine growth and anatomical changes of rice and barnyardgrass. Bensulfuron did not affect the growth and development of rites under dry seeded condition and trnsplanting condition while inhibited severely those of rice under water-seeded condition compared with untreated control. Under water-seeded condition, root growth of rice was much more severely inhibited by bensulfuron than shoot growth. The herbicide retarded the growth of barnyardgrass under dry-seeded condition and more severely inhibited than that under water-seeded condition. Microscopically, the anatomical change induced by bensulfuron occurred only in barnyardgrass under dry-seeded condition, and involved constriction of leaf primordia within leaf sheaths, rupture of mesophyll cell, and irregular cell arrangement. These anatomical alterations differed from and were not associated with the differential growth response.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.6
• /
• pp.607-611
• /
• 2001

Ultrasonic inspection system consist of the operator, equipment and procedure. The reliability of results in ultrasonic inspection is affected by its ability. Furthermore, the reliability of nondestructive testing is influenced by the inspection environment, materials and types of defect. Therefore, it is very difficult to estimate the reliability of NDT due to the various factors. In this study, the probability of detection by logistic probability model and Monte Carlo simulation is used for the reliability assessment of ultrasonic inspection. The utility of the NDT reliability assesment is verified by the analysis of the data from round robin test nth these models.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.48 no.7
• /
• pp.73-86
• /
• 2006

Concentrated poultry production in the State of Alabama, U.S.A. results in excessive poultry litter. Application of poultry litter to pastures and row crops serves as a cheap alternative to commercial fertilizer. However, over the years, poultry litter application to perennial forage crops in the Appalachian Plateau region of North Alabama has resulted in phosphorus (P) buildup in soils. Phosphorus index (P-index) and comprehensive nutrient management plans (CNMP) are often used as a best management practice (BMP) for proper land application of litter. Because nutrient management planning is often not done for small animal feeding operations (AFOs), and also because, in case of excess litter, litter transportation infrastructure has not been developed, over application of poultry litter to near by area is a common practice. To alleviate this problem, optimal poultry litter management and transportation infrastructure needs to be developed. This paper presents a methodology to optimize poultry litter application and transportation through efficient nutrient management planning and transportation network analysis. The goal was accomplished through implementation of three important modules, a P-Index module, a CNMP module, and a transportation network analysis module within ArcGIS, a Geographic Information System (GIS). The CNMP and P-Index modules assist with land application of poultry litter at a rate that is protective of water quality, while the transportation network analysis module helps transport excess litter to areas requiring litter in the Appalachian Plateau and Black Belt (a nutrient-deficient area) regions. Once fully developed and implemented, such a system will help alleviate water quality problems in the Appalachian Plateau region and poor soil fertility problems in the Black Belt region by optimizing land application and transportation. The utility of the methodology is illustrated through a hypothetical case study.

• Structural Engineering and Mechanics
• /
• v.17 no.3_4
• /
• pp.527-537
• /
• 2004

Consequence-Based Engineering (CBE) is a new paradigm proposed by the Mid-America Earthquake Center (MAE) to guide evaluation and rehabilitation of building structures and networks in areas of low probability - high consequence earthquakes such as the central region of the U.S. The principal objective of CBE is to minimize consequences by prescribing appropriate intervention procedures for a broad range of structures and systems, in consultation with key decision makers. One possible intervention option for rehabilitating unreinforced masonry (URM) buildings, widely used for essential facilities in Mid-America, is passive energy dissipation (PED). After the CBE process is described, its application in the rehabilitation of vulnerable URM building construction in Mid-America is illustrated through the use of PED devices attached to flexible timber floor diaphragms. It is shown that PED's can be applied to URM buildings in situations where floor diaphragm flexibility can be controlled to reduce both out-of-plane and in-plane wall responses and damage. Reductions as high as 48% in roof displacement and acceleration can be achieved as demonstrated in studies reported below.

• The Korean Journal of Applied Statistics
• /
• v.24 no.3
• /
• pp.477-484
• /
• 2011

When an event of target variable is rare, a widespread strategy is to build a model on the sample that disproportionally over-represents the events, that is over-sampled. Using the data over-sampled from the original data set, the predicted values would be biased; however, it can be easily corrected to represent the population. In this study, we investigate into the relationship between the proportion of rare event on a data-mart and the model performance using real world data of a Korean credit card company. Also, we use the methods for adjusting of posterior probability for over-sampled data of the offset method and the weighted method. Finally, we compare the performance of the methods using real data sets.

• Korean journal of applied entomology
• /
• v.10 no.1
• /
• pp.43-48
• /
• 1971

This experiment was conducted to determine the most effective type of Bight·trap for pine catepillar moths (Dendrolimus spectabilis B.) and to investigate the environmental factors affecting the attractiveness of the moths.. The various types of light traps made used of: black light, white light, fluorescent light, yellow light, and red light and the environmental factors considered were rainfall, wind velocity and collecting time. All the traps were operated from 8 in the evening to midnight. The results obtained are summarized as follows; The most effective attraction of moths ($62\%$ of total number attracted) was observed with blacklight-lamp and the most abundant attraction of the moths was found from 8 to 10 in the evening. Attractiveness in terms of sex ratio attracted from 8 to 10 in the evening was found to the .approximately 7 female to 1 male, Environmental factors considered were found to have no influences in attractiveness of the moths in this experiment.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.493-500
• /
• 2003

The effect of reductive treatment with elemental iron on the extent of mineralization by Fenton oxidation was studied for the explosive 2,4,6-trinitrotoluene (TNT) and hexahydro-l,3,5-trinitro-l,3,5-triazine (RDX) using a completely-stirred tank reactor (CSTR). The results support the hypothesis that TNT and RDX are reduced with elemental iron to products that are oxidized more rapidly and completely by Fenton's reagent. Iron pretreatment enhanced the extent of TOC removal by approximately $20\%\;and\;60\%$ for TNT and RDX, respectively. Complete TOC removal was achieved for TNT and RDX solutions with iron pretreatment under optimal conditions. On the other hand, without iron pretreatment, complete mineralization of TNT and RDX solutions were not achieved even with much higher $H_2O_2$ and $Fe^{2+}$ concentrations. The bench-scale iron treatment-Fenton oxidation integrated system showed more than $95\%$ TOC removal for TNT and RDX solutions under optimal conditions. The proposed zero-valent iron-Fenton process was evaluated with pink water from the Iowa Army ammunition plant. Results from batch and column experiments show that TNT, RDX, and octahydro-l,3,5,7-tetranitro-l,3,5,7-tetrazocine (HMX) were completely removed from the pink water and that triaminotoluene (TAT) and ${NH_4}^+$ were recovered as products in reduction with zero-valent iron. By using an integrated system, $83.3\pm4.2\%$ of TOC was removed in a CSTR with 10 mM of $Fe^{2+}$ and 50 mM of $H_2O_2$. These results suggest that the reduction products of TNT and RDX are more rapidly and completely mineralized by Fenton oxidation and that a sequential iron treatment-Fenton oxidation process may be a viable technology for pink water treatment.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1414-1417
• /
• 1996

The purpose of this study Is to research and develop $V_{6}O_{13}$ composite cathode for lithium thin film battery. $V_{6}O_{13}$ represents a class of cathode active material used in Li rechargeable batteries. In this study, we investigated cyclic voltammetry and charge/discharge characteristics of $V_6O_{13}$/SPE/Li cells. Cyclic voltammogram of $V_{6}O_{13}$/SPE/Li cell at scan rate 1mV/sec showed reduction peaks of 2.25V and 2.4V and oxidation peaks of 2.4V and 2.2V. The discharge curve of $V_{6}O_{13}$/SPE/Li cell showed 4 potential plateaus. The discharge capacity was decreased in the beginning of charge/discharge cycling. After 8th cycling, the discharge capacity was stable. The discharge capacity of 1st cycle and 15th cycle was 290mAh/g and 147mAh/g at $25^{\circ}C$, respectively.