• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.30-35
• /
• 2004

Several roll motion reduction devices are reviewed and suggested for the application in FPSO. The firstly suggested solution is the shape of the bilge. The next is a bilge keel. The last suggestion is the ART (anti-rolling tank). Typical U-tube type ART is designed for a FPSO and examined extensively by model experiment. The model section was made of transparent acryl. Free decay test, forced oscillation test and wave test were carried out at a two-dimensional wave flume. U-tube type ART is effective only when the natural periods of ART and ship are same. Therefore, the divided U-tube type ART with split plate is suggested for the reduction of the roll motion of a FPSO over the wide range of the roll period.

• Journal of the Korean Society of Industry Convergence
• /
• v.9 no.4
• /
• pp.309-315
• /
• 2006

Important material properties of UCAS rod can divide by tension characteristic of base rod part and both end part of U type anchor. Tensile properties of base rod part need as concrete reinforcement material as an alternative material of reinforcing rod, and tensile properties of U type anchor is used at connection with UCAS rod. This treatise carry out tensile test of UCAS rod, examine necessary properties such as strength, elastic modulus and maximum capacity of UCAS rod as reinforcement material of concrete. Also, to examine material properties carry out tensile test of U type anchor.

• Communications for Statistical Applications and Methods
• /
• v.7 no.2
• /
• pp.563-573
• /
• 2000

In this thesis, we propose the test statistic for ordered alternatives on c-sample ranked set samples(RSS). The proposed test statistic JRSS is Jonckheere type statistic using the median of the i-th samples in each cycle. We obtained the asymptotic property of the proposed test statistic and the asymptotic relative efficiencies of the proposed test statistic with respect to J SRS which Jonckheere type statistic on simple random samples(SRS). From the simulation works, J RSS is superior to J SRS. We compared the empirical powers of J RSS with respect to U RSS on ranked set sample and U SRS on simple random sample using all samples, which are proposed by Kim, Kim and Lee(1999). The powers of J RSS are nearly the same values when entire sample size is large. J RSS is superior to U RSS. J RSS is simpler than U RSSon calculating process.

• Korean Journal of Microbiology
• /
• v.23 no.3
• /
• pp.203-208
• /
• 1985

Partial characterization of B. thuringiensis var. kurstaki 3ab temperature-sensitive mutants was carried out through biochemical analyses, utilization tests of carbohydrate sources, antobiotic resistant test, hemolytic reaction test, growth measurement of Fructus gardenia sxtrant medium and toxicity test against mice. Six ts mutants, ts-U154, ts-U601, ts-U602, ts-U603, tsU-604, and ts-U788 could not produce urease, ts-U603 lost its motility, ts-U154 could not use salicin and cellobiose and ts-U603 not ribose. All ts mutants except ts-U154 and wild type strain were resistant to cephalothin, ampicillin, and penicillin. but ts-U154 was sensitive to the three. Four mutants, ts-U21, ts-U74, ts0U131 and ts-U154 did not form pigment colonies on the F. gardenia medium. All the mutants and wild type strain showed hemolysis reaction on the blood agar. The B. thuringiensis and mutants were not toxic to mice.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.4
• /
• pp.447-456
• /
• 2006

In this study, a torsional test for U-type steel box girders was performed to observe the effects of the kind of panel for top lateral walateral bracings on the torsional behavior of the U-type steel girder system. For the structural tests, the test specimen with a two-thirds scale of the system actually constructed in the field was used. In the torsional test to observe the efects of top lateral bracings, the most economical arrangement of the top lateral bracing was found to be the panel width to length ratio of 1:1.5 with the inclined angle of $40^{\circ}$.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.62 no.2
• /
• pp.103-109
• /
• 2013

In this study, the three sounds effects on subjects due to EEG type, and it researched to find optimal sound to increase their amenity and productivity. EEG and HRV were compared and analyzed in the environmental test room by classifying subjects into two type: A and B. The condition of the environmental test room was in temperature $31[^{\circ}C]$, relative humidity 50[RH%], air current speed 0.02[m/s] and illuminance 1000[lux] with setting up three different sounds which are U type sound, V type sound and Z type sound. The result of this study, at U type sound for A and B type, relative $M{\alpha}$ wave, relative $M{\beta}$ wave and SEF50 were revitalized. Also at Z type sound for A and B type, stress index, fatigue degree and HRT were decreased and SDNN was revitalized. Therefore U type sound is very effective to increase amenity, productivity and concentration, and Z type sound is very effective to decrease stress and fatigue degree.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.1
• /
• pp.68-76
• /
• 2007

In the present study, tests for U-type steel box girder are performed to observe the effects of W-type and X-type of top lateral bracings on the bending behavior of the U-type steel box girder system. Another objective of the present study is to investigate the adequacy of the currently available design formula. For the structural tests, the test specimen with two third scale of the system constructed in the field was used. In this test, several different spacings are used for the top lateral bracings. The stresses measured from the bending tests are compared with those by the formula proposed by Helwig. An adequate type and the required number of panel for diagonal bracing was obtained.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1705-1708
• /
• 2003

The purpose of this study is to investigate the manufacturing technique on the U type Draw-Bending of inner grooved tube. This bending process make the U shape tube by Hair Pin Bending machine. The U type tube requires the quality of product that satisfy sufficient conditions for a heat exchanger. The mandrel components act the important roles that prevent wrinkles and keep the shape of cross section of bended tube at bending process. We performed the FEM simulation using LS-DYNA software and the bending test of inner groove tube and then, compared bending simulation with bending test results about mandrel ball diameter, mandrel position and optimal clearance between mandrel and tube.

• Korean Journal of Occupational Health Nursing
• /
• v.22 no.2
• /
• pp.112-120
• /
• 2013

Purpose: The purpose of this study was to identify the influence of interpersonal attitude (I+, I-, U+, U-) on communication competence in care workers for frail elderly. Methods: This study was a cross-sectional survey. The data were collected from 153 care workers for frail elderly using a structured questionnaire. The data were analyzed using multiple regression with the SPSS/WIN 20.0 program. Results: The interpersonal attitude style of subjects was I+U+, and the score of communication competence was 3.53. There were significant differences in interpersonal attitude (I+, I-), and communication competence depending on age, education level, experience of personality type test (yes). Factors influencing on communication competence in care workers were interpersonal attitude (I+, I-, U+) and experience of personality type test with $R^2$ value of 48.5% (F=23.47 p<.001). The most influencing factor was I+ (${\beta}$=.36), followed by I- (${\beta}$=-.22), U+ (${\beta}$=.20), and experience of personality type test (yes) (${\beta}$=.16). Conclusion: It is needed to maintain the interpersonal attitude style (I+U+) of care workers. Continuing education program is needed for increasing communication competence especially for those fifties and over, and experienced care workers. Giving an opportunity for personality test is helpful to increase communication competence in care workers.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.148-151
• /
• 2003

The purpose of this study is to investigate the manufacturing technique on the U type Draw-Bending of inner groove tube. The U type tube requires the quality of product that satisfy sufficient conditions for a heat exchanger. The mandrel components act the important roles that prevent wrinkles and keep the shape of cross section of bended tube at bending process. We performed the FEM simulation using LS-DYNA software and the bending test of inner groove tube and then, compared bending simulation with bending test results about mandrel ball diameter, mandrel position and optimal clearance between mandrel and tube.