• Journal of Digital Convergence
• /
• v.12 no.11
• /
• pp.225-232
• /
• 2014

Supply of a smart device has been made with the development of communication networks and growing desire of people to improve the quality of life, the service industry about it have been made with smart devices. Among them, there are various services that can help people change their behavior to healthy life. But it does not have a large impact on the behavior change of performer because its been developed as a general process. Therefore in this study examine development situation about current behavior change applications through application markets. Development current situation can be separated by process to two patterns. As a result we propose behavioral change model that includes integrated change model that one of the behavior theory model, accomplish the goal process of goal setting theory and habit formation phase for automate the changes. Also, we provide appropriate service according to the model that leads motivation, sustainability of the action and positive behavior change to performer. We can expect in many aspects such as ability and motivation than existing service.

• Korean Journal of Materials Research
• /
• v.8 no.12
• /
• pp.1082-1089
• /
• 1998

To obtain fine dispersion of Ag particles in $YBa_2$$Cu_3$$O_{7-y}$ (123) superconductors, 123 samples were made by pyrophoric synthetic method using malic acid and the subsequent solid- state reaction. As the pyrophoric synthetic powder was used as a precursor material, fine 123 powder of submicron size was produced in a short reaction time. The added $Ag_2$O was converted to metallic Ag during Pyrophoric reaction and it accelerated both the formation of 123 phase and the grain growth via the enhanced mass transfer. The Ag particles of the sample sintered using the pyrephoric synthetic powder were more finely dispersed in the 123 matrix, compared to those of the sample sintered using the mechanically mixed powder, attributing to the improvement of the superconducting properties.

• Solar Energy
• /
• v.19 no.3
• /
• pp.23-28
• /
• 1999

The thermal performance of storage brick, containing microencapsulated PCM(phase change material), was investigated for utilization as a floor heating system. Sodium acetate trihydrate($CH_3COONa{\cdot}3H_2O$) was selected for the PCM and was encapsulated. The thermal storage brick was manufactured with mixing cement mortar having 10%, 20% PCM contents, respectively. Four different flow rates and three different cooling temperatures was used in this work for analyzing the heat charging and discharging characteristics of the thermal storage brick. The result showed that cycle time was shortened as the PCM content was increased and as the mass flow rate was increased. The same effect was obtained when the cooling temperature was decreased. For each thermal storage brick the overall heat transfer coefficient(U-value) was constant for a 0% brick, but was increased with time for the bricks containing microencapsulated PCM.

• Journal of Periodontal and Implant Science
• /
• v.36 no.1
• /
• pp.253-263
• /
• 2006

Purpose: Recently, dental implant systems have been widely used for the treatment of the extraction site, but we have been confronted with many limitations in esthetics, phonetics and function. Transitional implants(TI) were developed as a method of providing fixed provisional restorations during conventional implant healing. Until now, little data have been provided on korean transitional implants. The purpose of this study is to evaluate the implant placement site histologically after 4 weeks and 8 weeks. Materials and Methods : Test group( IntermetzzoTM MEGAGEN, KOREA) and control group(Mini Drive Lock, Intra Rock, U.S.A.) were immediately placed in interseptal or interproximal bone of beagle dog after mandibular premolars extraction, and had a healing period with non-submerged state but without loading, Both TI surfaces were composed of rough surfaces. Results: In the test group, the average percentage of BIC were respectively 39.40%(SD7.35) after 4 weeks and 44.05%(16.76) after 8 weeks, and In the control group were 50.75%(1.48) and 59.40%(0.00). Discussion: We evaluated the initial ability of the osseointegration of TI through this study. Because TI is placed with a conventional implant simultaneously and loaded immediately, the ability of osseointegration is a very important factor for the success of TI during the initial healing phase. Conclusion: The results of the histological evaluation of these two groups were similar to those mentioned in other studies for osseointegration of implant.

• Resources Recycling
• /
• v.6 no.1
• /
• pp.29-34
• /
• 1997

The feasibility of using the industrial inorganic waste materials such as l~mestone sludge. Soundly sand. coal fly 'ash, and chemical glasses as a raw material for cement clinker by melting treatmeut was iovestigated. The slag wh~ch is obtained from thc melts of the mixtnres of waste materials is composed of P-C,S(ZCaO - SIOJ and C,AS(ZCaO . AI,O, . SiO,) phases. The effect of melting tempcrabre, coaling condition and CIS ratio on the fo~mation of P-C,S phasc was examed. In order to obtain thc P-CiS phase which is useful in thc utilhtion as a clinkcr malcrid, it B found that sudl considerations as low melting temperature as possible of the wastc mixhire, quenching the melts and law CIS ratio of the mlxhlre are necessary.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.4
• /
• pp.808-814
• /
• 2010

Activities of nanostructure HZSM-5 and Co-ZSM-5 catalysts (with different Co-loading) for catalytic conversion of ethyl acetate and toluene were studied. The catalysts were prepared by wet impregnation method and were characterized by XRD, BET, SEM, TEM and ICP-AES techniques. Catalytic studies were carried out inside a U-shaped fixed bed reactor under atmospheric pressure and different temperatures. Toluene showed lower reactivity than ethyl acetate for conversion on Co-ZSM-5 catalysts. The effect of Co loading on conversion was prominent at temperatures below $400^{\circ}C$ and $450^{\circ}C$ for ethyl acetate and toluene respectively. In a binary mixture of organic compounds, toluene and ethyl acetate showed an inhibition and promotional behaviors respectively, in which the conversion of toluene was decreased at temperatures above $350^{\circ}C$. Inhibition effect of water vapor was negligible at temperatures above $400^{\circ}C$. An artificial neural networks model was developed to predict the conversion efficiency of ethyl acetate on Co-ZSM-5 catalysts based on experimental data. Predicted results showed a good agreement with experimental results. ANN modeling predicted the order of studied variable effects on ethyl acetate conversion, which was as follows: reaction temperature (50%) > ethyl acetate inlet concentration (25.085%) > content of Co loading (24.915%).

• Phonetics and Speech Sciences
• /
• v.3 no.1
• /
• pp.97-102
• /
• 2011

Electroglottography (EGG) is a common method for providing non-invasive measurements of glottal activity. EGG has been used in vocal pathology as a clinical or research tool to measure vocal fold contact. This paper presents the results of pitch, jitter, and closed quotient (CQ) measurements in electroglottographic signals of young (mean = 22.7 years) and elderly (mean = 74.3 years) male and female subjects. The sustained corner vowels /i/, /a/, and /u/ were measured at around 70 dB SPL since the most notable among EGG variables is the phonation intensity, which showed positive correlation with closed phase. The aim of this paper was to measure EGG data according to age and gender. In CQ, there was a significant difference between young and elderly female subjects while there was no significant difference between young and elderly male subjects. The mean value for young males was higher than that for elderly males while the mean value for young females was lower than that for elderly females. Thus, it can be said that in mean values, increased CQ was related to decreased age for females, while CQ decreased for males as the speaker's age decreased. Although the laryngeal degeneration due to increased age seems to occur to a lesser extent in females, the significant increase of CQ in elderly female voices could not be explained in terms of age-related physiological changes. In standard deviation of pitch and jitter, the mean values for young and elderly males were higher than that for young and elderly females. That is, male subjects showed higher in mean values of voice variables than female subjects. This result could be considered as a sign of vocal instability in males. It was suggested that these results may provide powerful insights into the control and regulation of normal phonation and into the detection and characterization of pathology.

• Journal of Surface Science and Engineering
• /
• v.42 no.4
• /
• pp.161-168
• /
• 2009

Effects of TiN/Ti multilayer coating on the Ti-30Ta-xZr alloy surface were studied by using various experiments. The Ti-30Ta containing Zr (5, 10 and 15 wt%) were melted 10 times to improve chemical homogeneity by using a vacuum furnace. And then samples were homogenized for 24 hrs at $1000^{\circ}C$. The specimens were prepared for TiN/Ti coating by cutting and polishing. The prepared specimens were coated with TiN/Ti multilayers by using DC magnetron sputtering method. The analyses of coated surface and coated layer were carried out by field emission scanning electron microscope(FE-SEM), EDX, and X-ray diffractometer(XRD). From the microstructure and XRD analysis of Ti-30Ta-xZr alloys, The equiaxed structure was changed to needle-like structure with increasing Zr content. And $\alpha$-peak and elastic modulus increased as Zr content increased. The $\alpha$ and $\beta$ phase predominantly were found in the specimen containing high Zr content. According to the analysis of TiN/Ti coating layer, the surface defects and structures of Ti-30Ta-xZr were covered with TiN/Ti coating layer and surface roughness decreased.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.8
• /
• pp.1907-1920
• /
• 1997

In this paper, we present integrated model of postal business that would be newly organized. The integrated model is developed through four phase. First, postal business is analyzed by three parts;collection, transportation and delivery. Second, the modeling criteria are developed that will be used for designing integrated postal business model. Third, object-oriented concepts are used by the steps of postal business modeling criteria captured. Finally, methods applied to developed model are grouped according to their function. Also, active-based mechanisms such as trigger and constraints are developed, and knowledge-based mechanisms such as inference are developed. These selected methods and attributes are encapsulated into objects. These constitute an object-active-knowledge based database model. Finally, Operational Scenario and Service Scenario are composed for real application according to proposed O-A-K model.

• The KIPS Transactions:PartD
• /
• v.8D no.6
• /
• pp.761-770
• /
• 2001

As software industry is rapidly evolving, IT business enterprises have been meeting with cutthroat competition in developing software. As software reusability, time to market, and maintainability are considered as a competitive edge, software component techniques have lately attracted considerable attention. Currently, although there are some supporting tools for developing software components, they do not have tight connections among component developing processes such as component identification, component modeling, detailed design, code generation, deployment, and testing. And it is restrictive for users to construct various scales of components on component platform architecture. In this paper, we provide an implementation and a design of a supporting tool for constructing platform-independent software components, which covers all development lifecycles of components. In the phase of component modeling, platform independent, conceptual components are identified from domain model information in the view of system partitioning. Detailed design and implementation of a component are performed on the J2EE platform architecture. And the changes on the design model and source codes are consistently managed by using round-trip techniques.