• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.12 s.189
• /
• pp.80-87
• /
• 2006

Seals are usually made from elastomer, a kind of rubber, and it has the non-linearity and hyper-elasticity. U-type seals are used to prevent the leakage of internal fluid sealed in hydraulic actuator because they have more excellent performance than O-rings or rectangular seals. As a core part of hydraulic actuator, U-type seal gives much effect on performance and reliability of actuator. This study considers an NBR U-type seal under high pressure of a hydraulic actuator, and provides its deformation, stress-strain characteristic and contact force using the non-linear finite element analysis. Analysis results are compared with the experimental ones performed by the self-developed testing equipment. Verification result shows that this study presents a good application process for the effective design of U-type seals under high operation pressure.

• Journal of the Korea Concrete Institute
• /
• v.18 no.2 s.92
• /
• pp.283-290
• /
• 2006

The paper describes m experimental study on the shear strengthening of concrete beams with exposed wire rope. The strengthening method is using the mechanical bolting of wire rope tensioned on the exterior of beam section. There are two shear strengthening types. The first is closed type wrapped beam section with wire rope like as closed stirrup. The second is U type tensioned at the anchor located in the side of beam section. The main parameters of specimens are strengthening spacings of wire rope with 150, 200, and 250mm for the closed and U type respectively. The shear span ratio of specimens applied by 3-point loading is 4. The results showed that the ultimate shear strength and ductility of strengthened beams increased significantly compared with non-strengthened beams. Especially, the strengthening effect of closed type was very preferable to U type. Therefore, the shear strengthening method with wire rope is very reasonable in view of repair and rehabilitation of beams.

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.4
• /
• pp.819-829
• /
• 2017

The aim of this study is to analyze intraday price momentum. When price trends are formed, price momentum is the phenomenon that future prices tend to follow the trend. When the market opened and closed, a U-shaped trading volume pattern in which the trading volume was concentrated was observed. In this paper, we defined price momentum as the 10 minute trend after market opening is maintained until the end of market. The strategy is to determine buying and selling in accordance with the price change in the initial 10 minutes and liquidating at closing price. In this study, the strategy was empirically analyzed by using minute data, and it showed effectiveness, indicating the presence of an intraday price momentum. A pattern in which returns are increasing at an early stage is called a J-shaped pattern. If the J-shaped pattern occurs, we have found that the price momentum phenomenon tends to be stronger than otherwise. The DTW algorithm, which is well known in the field of pattern recognition, was used for J-shaped pattern recognition and the algorithm was effective in predicting intraday price movements. This study showed that intraday price momentum exists in the KOSPI200 futures market.

• Journal of Bio-Environment Control
• /
• v.22 no.4
• /
• pp.408-412
• /
• 2013

This study was carried out to investigate damp injury caused by tomato coir bag culture and prevent that. The tomato variety was used 'Minichal', and tomatoes were grown in greenhouse. The nutrient solution based on Yamazaki Tomato Standard Solution was irrigated from one hour after sunrise to two hour before sunset. The slits for darainage were made in three types; I, L, and bottom slit type. The coir bag of I and L type had six slits of 15cm length, that of bottom slit type had three slits of 15 cm length. The weight of coir bag in 24 hours after saturation was 14.2 kg in I type, 13.8 kg in L type, and 12.8 kg in bottom slit type, but there was not significant difference. The weight of coir bag after one day irrigation was 14.5 kg, 14.2 kg, and 13.3 kg at L, I, and bottm slit type, respectively. This means that the moisture content of coir bag during cultivation was lowest in bottom slit type. The number of adventitious root on stem was 160, 170, and 53 at I, L, and bottom slit type, respectively. The dry weight of root and root length were highest at bottom slit type, compared to other treatment. The marketable yield was highest 26.5 kg/20 plant in bottom slit type. For increasing yield and preventing damp injury, bottom slit type was most effective at U type bed coir bag culture.

• Journal of the Economic Geographical Society of Korea
• /
• v.22 no.4
• /
• pp.576-591
• /
• 2019

This study attempts to analyze the effects of distance-accessibility to the complex shopping mall of 'Lotte Mall-Suwon', located at the old central and catchment district of the Suwon station in the Province of Gyeonngi, on the prices of its neighboring apartments within the Gwonseon-gu of Suwon City by using the hierarchical and linear-difference in difference regression method. The results of the analysis are as follows. First, before construction the effects of distance-accessibility show the U-shaped pattern, suggesting that the negative external effects of noise and traffic congestion around the Suwon Station affected the prices of its neighboring apartments within the Gwonseon-gu of Suwon City. Second, the effects of distance-accessibility at different times, such as the construction period and after the opening, are statistically significant only in the latter, indicating the reverse U-shaped pattern unlike before the opening. This means that after the opening of the complex shopping mall its external effects as a leisure and convenience space have a positive effect on the prices of its neighboring apartments within the Gwonseon-gu of Suwon City. Third, the effects of distance-accessibility is at an inflection point around 1.6-1.7 kilometers, which means that the U-shaped distance-decay pattern before construction, while the reverse U-shaped pattern is shown after the opening of opening. The latter implies that apartments that are very close to the mall within the Gwonseon-gu of Suwon City enjoy relatively small positive externalities. Therefore, they are exposed to some negative external effects of noise and traffic congestion, but apartments with some distance apart within the Gwonseon-gu of Suwon City maximize those positive externalities. These results suggest that the effects to distance-accessibility are different from location to location.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.220-220
• /
• 2017

일반적으로 XP-SWMM 모형을 이용한 침수모의를 실시할 경우 과부하 맨홀에 손실계수의 적용 시와 미적용 시에 침수 범위의 차이가 상이함에도 불구하고 보다 실제적인 침수면적의 모의를 위하여 에너지 손실 적용에 대한 도시침수해석의 구체적인 연구가 미흡한 실정이다. 또한 과부하관거에서의 배수능력을 증대하기 위하여 설치되는 맨홀 내 인버트의 침수저감 효과에 대한 분석이 필요한 실정이다. 이원 등(2015)은 군자배수구역을 대상으로 손실계수의 적용 방안 및 손실계수 적용에 따른 침수면적의 변화를 분석하였으나, 맨홀의 형상 및 인버트의 설치유무에 대한 사항을 고려하지 않았다. 그러므로 기 산정된 과부하 맨홀에서의 손실계수를 적용 및 인버트 설치에 따른 침수범위 변화의 분석이 필요할 것으로 판단된다. 본 연구에서는 손실계수 및 인버트 설치 여부에 따른 침수범위의 변화를 분석하기 위하여 도림천의 도림1배수분구를 대상으로 XP-SWMM을 활용하여 침수해석을 실시하였다. 김정수(2010)가 수리모형실험을 통하여 인버트를 설치하지 않은 기본형 맨홀에서 산정된 손실계수 0.61과 반원형, U자형 인버트를 각각 설치했을 시에 0.37, 0.30으로 산정된 손실계수를 XP-SWMM모형의 각 과부하 맨홀에 적용하였다. 침수모의 결과 과부하 맨홀에 손실계수를 적용하지 않은 경우의 침수면적은 21.14 ha로 모의되어 실제 침수면적과 약 60 % 정도의 일치율을 보였으나, 인버트를 설치하지 않은 기본형 맨홀의 손실계수를 적용한 경우의 침수면적은 37.12 ha로 모의되어 실제 침수면적인 35.65 ha와 거의 유사하게 나타났다. 또한 반원형 인버트를 고려한 경우의 침수면적은 28.04 ha, U자형 인버트 설치를 고려한 경우의 침수면적은 25.90 ha로 모의되었다. 인버트를 미적용한 경우의 침수면적과 비교하면 침수면적이 각각 24 %, 30 % 감소하였다. 따라서 도시 침수피해를 저감하기 위해 과부하 맨홀에 인버트를 설치한다면 맨홀내의 에너지 손실이 저감되고 배수능력이 향상되어 침수피해 면적과 침수심을 감소시킬 수 있을 것으로 판단된다.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.9
• /
• pp.31-41
• /
• 2013

The use of energy pile foundation has increased for economic utilization of geothermal energy. In particular, coil-shaped ground heat exchanger (GHE) is preferred to the conventional U-shaped exchanger to ensure better efficiency of heat exchange rate. This paper presents a numerical and experimental study on the heat transfer behavior of PHC energy piles. Field thermal performance tests (TPTs) were conducted for the PHC energy piles installed in a partially saturated weathered granite soil deposit, in which two types of GHEs were considered: W and coil shaped GHEs. Besides, three-dimensional finite element analyses were also conducted, and the results were compared with the experimental results. According to the results of TPT and numerical analyses, the coil shaped GHE showed 10~15% higher heat exchange rate than the W type GHE in the PHC energy piles.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1997.05a
• /
• pp.36-39
• /
• 1997

단고추(Capsicum annum)는 중앙아메리카와 남아메리카의 열대지방이 원산지로 알려져 있고 매운맛이 없으며 미숙과를 주로 샐러드용으로 이용하는 원추형 과실을 착생하는 품종군으로 일반고추재배와는 달리 반드시 정지 및 유인을 해야만 좋은 과실을 생산할 수 있으며, 유인 및 관리정도에 따라 품질의 차이가 커 이것이 가격에 영향을 미쳐 농가의 소득과 직결되여 있다. 정지와 유인은 보통재배의 경우 U자형과 V자형으로 하고 있으나 노동력이 많이 소요된다. (중략)

• Journal of the Korean Vacuum Society
• /
• v.4 no.2
• /
• pp.124-134
• /
• 1995

포항가속기연구소에서는 PLS 2-GeV 선형가속기 클라이스트론의 교체 및 보수시에 사용하기 위하여, 80 MW급 S-band의 도파관 밸브를 개발중에 있다. PLS형 도파관 밸브는 결합수단 없이 대전력을 전송할 수 있는 구조로 설계되어, 전력전송에 대한 제한을 받지 않는 특징을 갖는다. 본 도파관 밸브의 주요구성부는 밀착구동체를 갖는 U자형 도파관부, 두 개의 H-코너가 부착된 진공함, 그리고 두 개의 Viton O-링이 장착된 진공기밀판으로 이루어져 있다. 시제품용 도파관 밸브의 특성조사 결과, 펄스폭 3.5 $\mu$sec, 반복율 30 Hz에서 65MW의 전력전송을 얻을 수 있었다. 본 논문에서는 PLS도파관 밸브의 설계 개념, 기계적 특성 및 가공의 순으로 자세히 논할 것이며, 또한 현재까지의 실험결과 및 앞으로의 계획에 대하여 보고하기로 한다.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.839-840
• /
• 2015

IPM(Interior Permanent Magnet) 모터는 마그네틱 토크와 릴럭턴스 토크를 이용하는 모터이다. 이런 IPM 모터에 쓰이는 영구 자석 중 희토류 자석은 온도에 취약한 특성이 있어 낮은 온도에 비해 높은 온도에서 더 쉽게 불가역감자가 발생할 수 있다. 또한 페라이트자석에 비해 상대적으로 가격이 비싸 희토류 저감 IPM 모터 개발이 지속적으로 진행되고 있다. 따라서 본 논문에서는 희토류 저감 IPM 동기모터의 영구자석 위치를 변화한 3가지 U자형 2층 IPM 모터 모델을 선정하여 회전자 전류의 크기 및 위상 그리고 약자속 제어를 고려한 불가역 감자 특성을 비교 및 분석하였다. 이렇게 분석한 결과를 바탕으로 IPM 설계 시 불가역감자에 강인한 설계 방법에 대하여 고찰하였다.