• Journal of the Korean Institute of Rural Architecture
• /
• v.23 no.4
• /
• pp.21-29
• /
• 2021

The purpose of this study is to present the basic direction of the desirable spatial plan for elderly care facilities by analyzing the spatial characteristics of elderly care facilities in gyeongnam-province. As a research method, 189 elderly care facilities in gyeongnam-province were investigated for location conditions, site area, floor area, total floor area, and space composition. In addition, the area of each specific space was analyzed for two elderly care facilities with a typical floor plan. The results of the survey and analysis are as follows. First, the average number of people in the facility was 53.8, and the number of people in the facility needs to be planned to be medium or less so that they can live in a more comfortable environment in the future. Second, in the location type, it was found that many facilities were distributed in the order of suburban and rural type, urban type, mountain type, and waterfront type. In addition, in terms of facility space composition, the proportion of detached facilities was 50.8%. Complex facilities require a reasonable plan in consideration of the location type and other functional facility characteristics. Third, the average total floor area per person of elderly care facilities was 27.57m². There is a limit to constructing a unique nursing space. In the composition of bedrooms, quadruple rooms account for 67.4%, but it is necessary to expand the proportion of bedrooms that can be used by fewer people.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.4 s.20
• /
• pp.87-96
• /
• 2004

The construction duration in apartment construction is an important factor which affects project cost. Henceforth, the time shortening is essential to retrench project cost and project risk when there adopt Five-Day Workweek and introduce apartment sales after completion of construction. Therefore, the purpose of this study is to examine closely the affecting factors on the duration of framework which forms about $40\sim50\$ percent of total time in apartment construction by analyzing the schedule mechanism of typical floor and to show the reasonable time shortening methods by case study. The shown schedule mechanism and basic schedule table can utilize as a guideline in case of scheduling of framework in the existing construction method. Also, the shown time shortening methods by three case studies will guide the direction and process of time shortening while there need time shortening in many-sided projects.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.2
• /
• pp.151-159
• /
• 2016

Tower crane (T/C) is one of the major equipment that is highly demanded in construction projects. Especially, most high-rise building projects require T/C to perform lifting and hoisting activities of materials. Therefore, lifting plan of T/C needs to reduce construction duration and cost. However, most lifting plan of the T/C in construction sites has still performed depending on experience and intuition of the site manager without systematic process of rational work. Dependency structure matrix (DSM) is useful tool in planning the activity sequences and managing information exchanges unlike other existing tools. To improve lifting plan of T/C efficiently, this study presents a framework for the scheduling T/C using DSM through the case study in real world construction site. The results of case study showed that the scheduling T/C using DSM is useful to optimize the T/C lifting plan in terms of easiness, specially in the typical floor cycle lifting planning.

• KIEAE Journal
• /
• v.5 no.3
• /
• pp.41-48
• /
• 2005

Before occupation of an apartment housing, the builders are required to inform the test result of IAQ to the public. However, there is no simplified method to predict IAQ before measurement of pollutant concentration. In this study, a simplified way of predicting IAQ based on the distribution of indoor pollutant concentration is proposed. 7 different cases of air change rate have been simulated through CFD analysis to get the distribution ratio of each pollutant material and then simplified functions were used with CRIAQ1 values derived from CFD simulation to evaluate by comparing the influence of each material in the indoor pollutant concentration. Again, a lot of efforts which can improve the indoor air quality have been performed. Materials used in indoor space are labeled with their pollutant emission level. Installation of ventilation system in residential buildings will be regulated by a building codes sooner or later. But it is important to understand the fact that layout of walls, location or size of openings will influence the indoor air flow and pollutant concentration. And location of emitting material influences to indoor air pollutants distribution. But until now there is few recognition and consideration of these factors. Therefore, in this paper the effects of these factors is proved and some kind of guideline is made for designers after a comparison of typical apartment floor plan and a new type plan with their average pollutant concentration and its distribution of each room. CFD(Computational Fluid Dynamics) program was used to show the indoor air flow and pollutant concentration distribution. For this purpose, a typical $100m^2$ apartment floor plan was chosen as a case study model and several alternatives were reviewed to improve the IAQ performance. The simulation took place in the condition of natural ventilation through windows.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.6
• /
• pp.3-14
• /
• 2022

Quantitative analysis of the number of construction workers and construction period can present a new standard for appropriate personnel. This study presents a Queueing model that predicts the execution time of work procedures, the most important factor among work efficiency indicators. During the working cycle of apartment frame construction the same process tends to be repeated the volume of contruction. Based on these characteristics, this study used a Queueing Model and analyzed reference layer cycle of the delayed frame construction. After adjusting the number of people and the construction period, the performance of the model was analyzed and suggested. This study aims to support the decision making of personnel distribution according to the volume of construction by performing a performance analysis of the Queueing Model.

• The KSFM Journal of Fluid Machinery
• /
• v.12 no.1
• /
• pp.35-42
• /
• 2009

The flow and heat/mass transfer characteristics on the squealer tip surface of a high-turning turbine rotor blade have been investigated at a Reynolds number of $2.09{\times}10^5$, by employing the oil-film flow visualization and naphthalene sublimation technique. The squealer rim height-to-chord ratio and tip gap height-to-chord ratio are fixed as typical values of $h_{st}/c$ = 5.5% and h/c = 2.0%, respectively, for turbulence intensities of Tu = 0.3% and 15%. The results show that the near-wall flow phenomena within the cavity of the squealer tip are totally different from those over the plane tip. There are complicated backward flows from the suction side to the pressure side near the cavity floor, in contrast to the plane tip gap flows moving toward the suction side after flow separation/reattachment. The squealer tip provides a significant reduction in tip surface thermal load with less severe gradient compared to the plane tip. In this study, the tip surface is divided into six different regions, and transport phenomena at each region are discussed in detail. The mean thermal load averaged over the squealer cavity floor is augmented by 7.5 percents under the high inlet turbulence level.

• Earthquakes and Structures
• /
• v.18 no.2
• /
• pp.233-248
• /
• 2020

In this article, one of the procedures to design viscous dampers proposed in literature is applied to 3D asymmetric-plan buildings, considering different distributions for the damping coefficients, which are assumed to be proportional to specific structural or response parameters. The main purpose was to investigate the effectiveness of different vertical and in-plan distributions of the damping coefficients of nonlinear viscous dampers for the seismic retrofit of existing buildings. For comparison purposes, all the distributions were applied utilizing both a simplified and an extended method for the 3D structures, where the simplified method takes into account only the translation in the seismic direction, and the extended method considers the translations along the two orthogonal directions together with the floor rotations. The proposed distributions were then applied to a typical case study involving an asymmetric-plan six-storey RC building. The effectiveness of the different distributions was examined through time-history analyses, assuming nonlinear behaviour for both the viscous dampers and the structural elements. The results of the nonlinear dynamic analyses were examined in terms of maximum and residual inter-storey drifts, peak floor accelerations and maximum damper forces.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.27 no.1
• /
• pp.243-249
• /
• 1997

Adenoid cystic carcinoma is a malignant salivary gland tumor with typical histologic patterns. The majority of these tumors occurs in the minor salivary glands. especially mucosa of the hard palate. The authors experienced the patients, who complained the tumor-like soft tissue masses on the palatal and mouth floor area. After careful analysis of clinical, radiological and histopathological findings, we diagnosed them as adenoid cystic carcinomas in the minor salivary glands, and obtained results were as follows : 1. Main clinical symptoms were a slow growing soft tissue mass with normal intact mucosa on the palatal area, and soft tissue mass with mild pain on the mouth floor area. 2. In the radiographic exarnminations, soft tissue masses were observed with invasion to adjacent structures, and moderate defined, heterogeneous soft tissue mass with enhanced margin, respectively. 3. In the histopathologic exarnminations, dark-stained, small uniform basaloid cells in the hyaline or fibrous stroma were observed as solid and cribriform patterns, respectively.

• Fire Science and Engineering
• /
• v.15 no.1
• /
• pp.75-83
• /
• 2001

It has been recognized that the evacuation planning is very important for effective evacuation of occupants on fire event. However the present evacuation planning and regulation for fire safety usually tend to meet the minimum requirements based on the existing laws and regulations. The ultimate goal of the evacuation planning is evacuate occupants rapidly from building fires to the safe areas. In this study, First, analyzed occupants load density and occupants characteristics in high-rise apartment buildings, Second, A evacuation safety performance of high-rise apartment buildings was analyzed with various typical floor plans. The purpose of this study is to figure out the evacuation characteristics in high-rise apartment buildings and improve countermeasure through comparative study on the Evacuation regulation and floor plans for High-rise Apartment buildings.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2003.11a
• /
• pp.265-270
• /
• 2003

This expressway passing the address region that is sightseeing of our country must consider in what do a convenience sincerity chase and a cultural side view. A region with development possibility and a spinoff about a cultural element must hold consideration at the same time to a sightseeing resort. This route that passed Gang-Reung, Yang-Yang, Sok-cho was connecting an obstetrics acid, and accessibility along investigation was a hard place. In this region, a classic house is tying scattered, and JeonSaCheong inviting an ancestral mortuary tablet is appearing. The private house was divided during a classic house by using typical Gangwon to the room where a floor was introduced by house with several wings Korean floor heater center form. A characteristic form a characteristic change was appearing on each rooms and structure, a plane according to the times, and to execute extension with a lease in a direction too was able to be seen, and Confucianism a little culture very remained in construction, and a memorial service space, a closet were able to be seen. Also, this local high house had a lot of regions composed of a relative and was with doing in the village that did to these house several houses.