• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.10-14
• /
• 2002

Structural behavior of high-pressure composite vessels of TYPE 3 (full-wrapped over a seamless aluminum liner) was studied through numerical simulations based on 3D nonlinear finite element method. Under high-pressure loading, a TYPE 3 composite vessel shows material nonlinearity due to elastic-plastic deformation of aluminum liner, and mismatch of deformation at the junction of cylinder and dome causes geometrical nonlinearity. Finite element modeling and analysis technique considering this nonlinearity was presented, and a pressure vessel of 6.8L of internal volume was analyzed. Design specification to satisfy requirements was determined based on analysis results.

• 한국기계가공학회지
• /
• 제18권3호
• /
• pp.7-13
• /
• 2019

Recently, an automobile market used to natural gas has emerged as fast-growing as the several countries, who holds abundant natural fuel resources, has promoted to supply the national agency for an automobile car. LNG fuel vessel is more efficient in another way as the energy density is high, but it requires a high technology and investment to maintain extreme low temperature. CNG fuel vessel are relatively low-cost alternative to LNG, but poorly economical in terms of energy density as well as showing safety issues associated with compressed pressure. The development of adsorbed natural gas (ANG) has emerged as one of potential solutions. Therefore, it is desirable to reduce the weight of vessel by applying light-weighed a composite carbon fiber in order to response to the regulation of $CO_2$ emission. Herein, this study make the prototype ANG vessel not only based on the optimal design and analysis of material characteristic but also based on the shape design, and it suggest a new type for the composite carbon fiber vessel which verified functional test. Moreover, the detail shape design is analyzed by a finite element analysis, and its verifies the ANG vessel.

• Composites Research
• /
• 제21권1호
• /
• pp.1-7
• /
• 2008

복합재 고압 용기는 우수한 기계적 강도를 유지하면서 경쟁적인 무게절감을 얻을 수 있는 복합재의 장점으로 인해 최근에 많이 사용되고 있다. 하지만 고압에서 발생하는 복합재의 기밀 문제(permeability)를 보완하기 위해 금속으로 덧대는 Type 3 형태의 구조로 많이 사용된다. 그러나 복잡한 기하학적 형상, 제조공정 변수 등으로 인해 차입 3 형태의 압력용기를 설계하는 데에는 많은 어려움이 뒤따른다. 따라서 본 연구에서는 이러한 변수들을 고려하는 준측지궤적 알고리즘(semi-geodesic algorithm)과 최적화를 위한 유전자 알고리즘을 적용하여 차입 3 복합재 압력용기의 GUI(graphic user interface) 최적설계 프로그램을 개발하였다. 또한 개발된 프로그램을 이용하여 연료 전지 자동차에 적용되는 350/700 바 수소저장용기에 대해 최적 설계를 수행하였다.

• 한국수소및신에너지학회논문집
• /
• 제29권6호
• /
• pp.570-577
• /
• 2018

Composite pressure vessels made through filament winding are widely used in various fields. Numerous studies regarding composite pressure vessels have been conducted in the automotive industry to improve the space efficiency of trunks as well as the fuel efficiency. Compared with steel liquefied petroleum gas (LPG) vessels used in the conventional LPG vehicles, the use of type 4 composite pressure vessels has advantages in terms of reduction of the weight of vehicles. This study focused on development of type 4 composite pressure vessels that can be installed in the spare tire well. Those type 4 composite pressure vessels are designed with torispherical dome shapes instead of geodecis dome shapes because of the space limitation. To reduce deformation due to the stresses in the axial direction of the vessels, thereby securing the safety of the container, the reinforcing bar concept was applied. A structural analysis software, ABAQUS, confirmed the effect of the reinforcing bar on the axial deformation through the type 4 composite pressure vessel. As a result, the final winding angle of the composite layer was analyzed by applying $26^{\circ}/28^{\circ}/26^{\circ}/28^{\circ}/26^{\circ}/88^{\circ}$ The tensile stress was 939.2 MPa and the compressive stress was 249.3 MPa.

• 한국기계가공학회지
• /
• 제14권5호
• /
• pp.120-125
• /
• 2015

This research aims to increase the reliability and reproducibility of the ambient cycling test by properly making corrections to the test procedure. The vessel (106 L) is initially filled with 70 L of water and horizontally placed on a balance. The pressure range inside the vessel varies from 2.5 to 25.9 MPa at the frequency of 6 cycles per minute. After reviewing the results, there was a temperature difference of approximately $10^{\circ}C$ between the air pocket and the water, and the upper part of the liner faced a repeated temperature change of $40^{\circ}C$. It is possible for the aluminum liner of the composite vessel to be damaged by such a sharp change in temperature. Additionally, as a result, no pass having anything to do with the purpose of the test would occur. Therefore, it is suggested that the air pocket be completely removed.

• 한국기계가공학회지
• /
• 제17권6호
• /
• pp.151-157
• /
• 2018

In this study, we have developed a composite pressure vessel that is compact and can store refrigerant at high pressure to increase the refrigerant volume. The composite pressure vessel is made of aluminum-based duralumin, which has high rigidity and excellent elongation in the inner liner, considering the characteristics of products in the aerospace and defense industry, where the safety of the applied product is considered as a priority. High strength carbon fiber was applied to the outside. In order to evaluate the performance of the developed product, burst test and cycling test were carried out. In burst test, an excellent safety margin equivalent to 2.7 times the operating pressure was obtained. In cycling test, a stable failure mode in which 'pre-burst leak' occurs is proved and the soundness of the product is proved.

• 한국수소및신에너지학회논문집
• /
• 제32권3호
• /
• pp.172-179
• /
• 2021

The drop impact analysis was carried out on Type 4 pressure containers, and the degree of damage to the falling environment was predicted and determined using smoothed particle hydrodynamics (SPH) techniques. The purpose of the design and the optimization process of the winding pattern of the pressure vessel of the composite material is to verify the safety of the container in actual use. Finally, an interpretation process that can be implemented in accordance with domestic test standards can be established to reduce the cost of testing and containers through pre-test interpretation. The research on the fall analysis of pressure vessels of composite materials was conducted using Abaqus, and optimization was conducted using ISIGHT. As a result, the safety of composite pressure vessels in the falling environment was verified.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.23-27
• /
• 2007

To store hydrogen with high pressure is one of key technologies in developing FCVs (fuel cell vehicles). Especially, metal lined composite structure, which is called Type 3, is expected to effectively stand highly pressurized hydrogen since it has high specific strength and stiffness as well as excellent storage ability. However, it has many difficulties to design Type 3 vessels because of their complex geometry, fabrication process variables, etc. In this study, therefore, optimal design of Type 3 vessels was performed in consideration of such actual circumstances using genetic algorithm. Additionally, detailed finite element analysis was followed for the optimal result.

• Composites Research
• /
• 제23권6호
• /
• pp.7-13
• /
• 2010

CNG 차량에서 실사용 중 Type3 복합재료 압력용기의 외부 복합재 층에 결함이 발생된다면, 용기의 구조적 성능 즉, 원래의 설계수명보다 반복수명이 감소되는 현상을 초래할 수 있다. 이에 따라, 본 연구에서는 복합재 결함을 고려한 복합재료 압력용기의 유한요소 모델링과 해석 기법을 제시하였다. Type3 복합재료 압력용기의 유한요소해석은 자긴처리 공정에서 알루미늄 라이너의 소성 변형으로 인해 경로 의존적 현상을 보이므로, 실사용 중 결함이 발생되는 실제 환경을 고려한 해석에서 결함은 자긴압력 이후에 도입되어야한다. 이러한 상황의 사실적인 시뮬레이션을 위해, 해석의 중간단계에서 결함이 도입되는 유한요소 모델링과 해석 기법이 제시되었으며, 해석결과는 해석의 시작단계에서부터 모델에 초기결함을 내포하는 일반적 유한요소해석과 비교되었다. 제안된 해석 기업은 Type3 복합재료 압력용기의 복합재층 손상에 따른 영향성 평가 및 실사용 중에서의 검사 기준을 마련하는데 효과적으로 사용될 수 있다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권9호
• /
• pp.1150-1155
• /
• 2014

강화플라스틱(FRP) 선박은 화재 시 화염확산을 막기 위하여 관련 구조 기준에 따라 기관실 주위 벽 내부를 난연성 수지로 3회 이상 적층하거나, 이와 동등한 방열재로 둘러싸야한다. 관련 난연성 적층용 수지 및 일부 난연재료(연질폴리우레탄복합체)의 경우 선박용 물건의 형식승인 시험기준에 따라 그 성능을 평가할 수 있으나, 방열재로 빈번하게 사용되고 있는 '겔코트'에 대한 성능기준은 명확하지 않은 실정으로 난연성 수지와 화재안전성능이 비교 평가된 바 없다. 본 연구에서는 FRP 선박을 건조하는 조선소를 대상으로 설문조사를 실시하여 사용 중인 난연성 수지 3종, 겔코트 4종, 방염도료 1종 및 폴리우레탄 복합재 1종에 대해 화염전파시험과 방염성능시험을 적용하여 그 성능을 비교하였다. 화염전파시험 결과 임계열유속(CFE) 기준으로 각 종별 평균값을 비교하면 폴리우레탄 복합재, 난연성 수지, 방염도료, 겔코트 순으로 양호한 것으로 나왔고, 겔코트는 3회 도포한 것이 6회 도포한 것보다 양호한 결과를 보였다. 방염성능시험 결과 탄화면적 기준으로 각 종별 평균값을 비교하면 방염도료가 가장 좋게 나왔고 난연성 수지와 겔코트는 유사한 수준으로 나타났다.