• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.4
• /
• pp.474-482
• /
• 2021

An average of two to three typhoons that occur in the Philippines or Taiwan pass through Korea each year owing to the influence of the geographical location and western winds. Because Jinhae Bay is known as Korea's representative typhoon refuge, it is filled with ships during typhoons and later becomes saturated with ships anchored to the surrounding routes. If a strong wind drags an anchored ship, a collision accident may occur because of the short distance between the ships. Therefore, a systematic anchoring safety management of Jinhae Bay is required. In this study, the minimum wind speeds of a dragging anchor based on the water depths of Jinhae Bay anchorages were investigated. When 7-9 shackles were given, the minimum wind speeds were 48-63, 46-61, and 39-54 knots at depths of 20, 35, and 50 m, respectively. As the water depth increased, the length of the cable laid on the sea bed became shorter than 5 m owing to the external force, and the minimum wind speed showed a significant difference of 4-8 knots. In addition, ships with high holding power anchors (AC-14 type) had higher minimum wind speeds than ships with conventional anchors (ASS type). Finally, it was confirmed that at a depth of 50 m, dragging easily occurred even when a high holding power anchor was applied.

• Korean Journal of Heritage: History & Science
• /
• v.39
• /
• pp.5-38
• /
• 2006

Although in Korea there are only three examples of wooden coffins being found in burial mounds - from the Daho-ri, Songhyun-dong, and Munyung tombs, in Japan data on the shape and structure of wooden coffins from the Gofun era is relatively abundant. The wooden coffins of the Gofun era of Japan can be classified into either the dugout log style or the combined boards style according to their method of manufacture. They can also be divided by shape, into such categories as the boat shape, the split bamboo shape, the box shape, and so on. The box shape category can be further divided into the assembled type and the nailed type, according to how the boards are put together. Japanese Umbrella Pine (Sciadopitys verticillata) was favored as coffin-wood in all ages, but during the later Gofun era easily obtained woods such as the Japanese cedar (Cryptomeria japonica) or the Hinoki Falsecypress (Chamaecyparis obtusa) were also used. The coffins found at Daho-ri and Songhyun-dong are similar to the Japanese dugout log style in shape and manufacture, while the king's and queen's coffins excavated at Munyung Tomb are seen to have had direct influence on the appearance of nailed coffins Japan. The coffin in Songhyun-dong 7th mound was originally a dugout log boat. It was probably used for practical reasons such as the bugproof, anti-corrosion qualities of camphor wood, not because of ideological reasons such as in a boat burial (in which the boat takes the deceased to the after world). Because the Changnyong region is inland, where camphor trees do not grow, using an already existing boat may have been the only way to procure a camphor-wood coffin. From historical circumstances, it may be inferred that the camphor trees were imported into Korea from Japan, between which there was much cultural exchange.

• Environmental and Resource Economics Review
• /
• v.18 no.4
• /
• pp.787-813
• /
• 2009

Because of global warming, the thawing of the Arctic ice cap is slowly accelerating. That is the hot issue nowadays. According to the each country's climate change policy, it is boom in the world to lessen the consuming of the fossil fuel those are oil, coal and natural gas. But on the contrary the thawing of the Arctic ice cap is the chance to make the natural gas producing unit cost lower. The purpose of this paper is to search the Arctic policy of each country under the contradictory relationship between promoting the climate change policy and exploiting the natural gas on the Arctic. Specially, there are huge natural gas reserves in Russia on the Arctic region, Russia's exploiting the natural gas on the Arctic will affect on the natural gas supply-demand balance of world natural gas market strongly in the future. Therefore it needs to prepare the future energy alternative policy for Korea's energy security. Russia has Yamal Peninsular where is abundant on natural gas reserver, and she can supply natural gas by LNG ship all over the world via the Arctic route. This means that the structure of world natural gas market be changed gradually. It will be possible in 2030~2040. And such a change is very important because new natural gas trading type can do it through not only overcoming the geological restriction but also shifting the main trading type from PNG(Pipeline Natural Gas) to LNG(Liquified Natural Gas). Therefore it is necessary that we should let this be a good lesson to ourselves through the government action of other countries (China, Japan) those also have no sovereignty over the Arctic as Korea.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1209-1215
• /
• 2022

The selective catalytic reduction (SCR) is known as a very efficient method to reduce nitrogen oxides (NOx) and the catalyst performs reduction from nitrogen oxides (NOx) to nitrogen (N₂) and water vapor (H2O). The catalyst, which is one of the factors determining the performance of the nitrogen oxide (NOx) ruduction method, is known to increase catalyst efficiency as cell density increases. In this study, the reduction characteristics of nitrogen oxides (NOx) under various engine loads investigated. A 100CPSI(60Cell) catalysts was studied through a laboratory-sized simulating device that can simulate the exhaust gas conditions from the power generation engine installed in the training ship SEGERO. The effect of 100CPSI(60Cell) cell density was compared with that of 25.8CPSI(30Cell) cell density that already had NOx reduction data from the SCR manufacturing. The experimental catalysts were honeycomb type and its compositions and materials of V₂O₅-WO₃-TiO₂ were retained, with only change on cell density. As a result, the NOx concentration reduction rate from 100CPSI(60Cell) catalyst was 88.5%, and IMO specific NOx emission was 0.99g/kwh satisfying the IMO Tier III NOx emission requirement. The NOx concentration reduction rate from 25.8CPSI(30Cell) was 78%, and IMO specific NOx emission was 2.00g/kwh. Comparing the NOx concentration reduction rate and emission of 100CPSI(60Cell) and 25.8CPSI(30Cell) catalysts, notably, the NOx concentration reduction rate of 100CPSI(60Cell) catalyst was 10.5% higher and its IMO specific NOx emission was about twice less than that of the 25.8CPSI(30Cell) catalysts. Therefore, an efficient NOx reduction effect can be expected by increasing the cell density of catalysts. In other words, effects to production cost reduction, efficient arrangement of engine room and cargo space can be estimated from the reduced catalyst volume.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.2
• /
• pp.173-180
• /
• 2018

Marine casualties of small fishing vessels (SFV) of less than 20 tons are frequent in Korea. The analysis was conducted to identify the cause and then prepared reduction plan using the marine casualty statistics of fishing vessels for the last five years from 2012 to 2016 by the Korean Maritime Safety Tribunal to reduce the marine casualties of SFV. According to the analysis of the type of whole vessels occurring marine casualty, fishing vessels accounted for an average 68.0 %; moreover, except for 2014 when M/V SEWOL ferry capsizing occurred, the rate of death and missing due to marine casualties occurred from 68.3 % to 91.2 % in fishing vessels, and an average 79.5 % was found to be urgent need of a measure. Marine casualties occurrence depending on the gross tonnage of fishing vessel was found that the most occurred at less than 5 tons, followed by the order of 5 to 10 tons or less. However, crews who boarded on SFV do not have any training program for them, except for the fishing safety training of fisher who carry out fishing for shipowners and crew of the coastal and offshore fishing vessel in accordance with the safety regulations for fishing vessels in the Fisheries Cooperative Association. Therefore, it is necessary to revise the training program so as to improve the preventive action and then emergency response including the fishing safety compliance with each fishery, safe navigation, machinery inspection and emergency response. Also, an SFV of less than 5 tons of 56,000 vessels is boarded by unqualified fishers. It would also be possible to consider subdividing small boat operator's certificate to enhance their qualifications. It is expected that marine casualties of SFV will be reduced if active efforts are made to improve the safety consciousness of fisher and shipowners as well as the reorganization of fishing safety training and the small boat operator's certificate system.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.133-144
• /
• 2009

Incheon Bridge, 18.4 km long sea-crossing bridge, will be opened to the traffic in October 2009 and this will be the new landmark of the gearing up north-east Asia as well as the largest & longest bridge of Korea. Incheon Bridge is the integrated set of several special featured bridges including a magnificent cable-stayed girder bridge which has a main span of 800 m width to cross the navigation channel in and out of the Port of Incheon. Incheon Bridge is making an epoch of long-span bridge designs thanks to the fully application of the AASHTO LRFD (load & resistance factor design) to both the superstructures and the substructures. A state-of-the-art of the geotechnologies which were applied to the Incheon Bridge construction project is introduced. The most Large-diameter drilled shafts were penetrated into the bedrock to support the colossal superstructures. The bearing capacity and deformational characteristics of the foundations were verified through the world's largest static pile load test. 8 full-scale pilot piles were tested in both offshore site and onshore area prior to the commencement of constructions. Compressible load beyond 30,000 tonf pressed a single 3 m diameter foundation pile by means of bi-directional loading method including the Osterberg cell techniques. Detailed site investigation to characterize the subsurface properties had been carried out. Geotextile tubes, tied sheet pile walls, and trestles were utilized to overcome the very large tidal difference between ebb and flow at the foreshore site. 44 circular-cell type dolphins surround the piers near the navigation channel to protect the bridge against the collision with aberrant vessels. Each dolphin structure consists of the flat sheet piled wall and infilled aggregates to absorb the collision impact. Geo-centrifugal tests were performed to evaluate the behavior of the dolphin in the seabed and to verify the numerical model for the design. Rip-rap embankments on the seabed are expected to prevent the scouring of the foundation. Prefabricated vertical drains, sand compaction piles, deep cement mixings, horizontal natural-fiber drains, and other subsidiary methods were used to improve the soft ground for the site of abutments, toll plazas, and access roads. Light-weight backfill using EPS blocks helps to reduce the earth pressure behind the abutment on the soft ground. Some kinds of reinforced earth like as MSE using geosynthetics were utilized for the ring wall of the abutment. Soil steel bridges made of corrugated steel plates and engineered backfills were constructed for the open-cut tunnel and the culvert. Diverse experiences of advanced designs and constructions from the Incheon Bridge project have been propagated by relevant engineers and it is strongly expected that significant achievements in geotechnical engineering through this project will contribute to the national development of the longspan bridge technologies remarkably.

• Journal of the Geological Society of Korea
• /
• v.54 no.6
• /
• pp.641-656
• /
• 2018

Although an amount of hydrocarbon has been discovered in the West Korea Bay Basin (WKBB), located in the North Korean offshore area, geophysical investigations associated with these hydrocarbon reservoirs are not permitted because of the current geopolitical situation. Interpretation of satellite derived potential field data can be alternatively used to image three-dimensional (3D) density distribution in the sedimentary basin associated with hydrocarbon deposits. We interpreted the TRIDENT satellite-derived gravity field data to provide detailed insights into the spatial distribution of sedimentary density structures in the WKBB. We used 3D forward density modeling for the interpretation that incorporated constraints from existing geological and geophysical information. The gravity data interpretation and 3D forward modeling showed that there are two modeled areas in the central subbasin that are characterized by very low density structures, with a maximum density of about $2,000kg/m^3$, indicating some type of hydrocarbon reservoir. One of the anticipated hydrocarbon reservoirs is located in the southern part of the central subbasin with a volume of about $250km^3$ at a depth of about 3,000 m in the Cretaceous/Jurassic layer. The other hydrocarbon reservoir should exist in the northern part of the central subbasin, with an average volume of about $300km^3$ at a depth of about 2,500 m. A comparison between the TRIDENT derived gravity field and the ship-based gravity field measured in 1980s shows us that our results are highly reliable and there is a very high probability to detect another low-density layer existings in the northwestern part of the central subbasin.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.4
• /
• pp.879-892
• /
• 2021

In a make-to-order manufacturing environment, the manufacturer's quotation information is important information used as basic information for bidding, receiving orders, and producing products in response to various customer demands. This quotation information is changed according to various factors such as customer demands, changes in product production environment, changes in drawing information of technical partners, and technological improvement of products. Due to this change, various changes occur in the quotation information that the manufacturer is preparing to reflect the customer's requirements. The change of quotation information according to these various change factors puts a lot of burden on the quotation management work from the standpoint of a make-to-order manufacturing company. In particular, the change of quotation information due to the change factors of quotation is inevitable and frequently occurs due to the requirements of the customer in the customer-oriented make-to-order production environment. In this paper, we propose a quotation change process based on the quotation creation process and propose a consistent and efficient quotation change processing method. To this end, the factors causing the change of quotation were defined, and the types of changes for each factor were defined. And it shows the procedure of applying the quotation change process to the quotation management system through the cases of each cause of the quotation change. In addition, in order to show the usefulness of the quotation change factors, the type of quotation change, the quotation change process, and the quotation system management, the proposed quotation change process and function was applied in the integrated quotation management system for the ship engine division of a typical make-to-order manufacturing company 'H'. As a result, it was confirmed that the proposed quotation change process and management system according to the quotation change factors were efficiently performed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.4
• /
• pp.549-566
• /
• 2022

Recently, artificial intelligence (AI) technology has progressed rapidly, and industries using this technology are significantly increasing. Further, analysis research using text mining, which is an application of artificial intelligence, is being actively developed in the field of social science research. About 125 laws, including joint laws, have been enacted under the Ministry of Oceans and Fisheries in various sectors including marine environment, fisheries, ships, fishing villages, ports, etc. Research on the laws under the Ministry of Oceans and Fisheries has been progressively conducted, and is steadily increasing quantitatively. In this study, the domestic research trends were analyzed through text mining, targeting the research papers related to laws of the Ministry of Oceans and Fisheries. As part of this research method, first, topic modeling which is a type of text mining was performed to identify potential topics. Second, co-occurrence network analysis was performed, focusing on the keywords in the research papers dealing with specific laws to derive the key themes covered. Finally, author network analysis was performed to explore social networks among authors. The results showed that key topics have been changed by period, and subjects were explored by targeting Ship Safety Law, Marine Environment Management Law, Fisheries Law, etc. Furthermore, in this study, core researchers were selected based on author network analysis, and the tendency for joint research performed by authors was identified. Through this study, changes in the topics for research related to the laws of the Ministry of Oceans and Fisheries were identified up to date, and it is expected that future research topics will be further diversified, and there will be growth of quantitative and qualitative research in the field of oceans and fisheries.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.4
• /
• pp.371-379
• /
• 1992

In order to analyse the mesh selectivity for the trawl net, the fishing experiment was carried out by the training ship Saebada in the southern Korea Sea and the East China Sea from June 1991 to August 1992. The trawl net used in experiment has the trouser type of cod-end with cover net, and the mesh selectivity was examined for the five kinds of the opening mesh size in its cod-end part. The selection curves and the selection parameters were calculated by using a logistic function, S=1/(1+exp super(-(aL+b))), and in this case, a and b are the selection parameters and L is the body length of the target species of fishes. In this report, the four species of aquatic animals were analysed because the catch data were enough to calculate normally the selection curves and the selection parameters, and the results obtained are summarized as follows: 1. Trachurus japonicus; Selection parameters a and b in each cases of the opening mesh size of 51.2mm, 70.2mm, 77.6mm, 88.0mm and 111.3mm were respectively 0.5050 and -5.4283, 0.3018 and -4.9590, 0.3816 and -7.3659, 0.2695 and -5.7958, 0.2170 and -5.1226. 2. Photololigo edulis ; Selection Parameters a and b in each cases of the former mesh sizes were respectively 0.7394 and -6.1433, 0.3389 and -4.2366, 0.3286 and -5.1002, 0.2543 and -5.0049, 0.1795 and -4.8040. 3. Trichirus lepturus; Selection curves in the opening mesh size of 111.3mm was calculated unnormally. The selection parameters in the other opening mesh sizes were respectively 0.3790 and -5.2891, 0.2071 and -4.9164, 0.1292 and -3.1733, 0.1153 and -3.8497 in the order of former mesh sizes except 111.3mm. 4. Todarodes pacificus ; Selection curve in case of the opening mesh sizes, 70.2mm and 111.3mm were calculated unnormally. In the order cases of the opening mesh sizes, the selection parameters were respectively were 0.5766 and -6.0169, 0.3735 and -5.4633, 0.2771 and -5.7718 in the order of former mesh sizes except 70.2mm and 111.3mm.